Upper door seal (drain) for Lada Priora sedan, hatchback

Gutters from Priora on VAZ 2110

Priora designers took into account the minus tens when all the dirt flowed from the windshield onto the side windows and installed deflectors and drains.
These plastic trims prevent water from flowing from the windshield onto the door pillars, but redirect the flow of water to the roof of the car. Priora with gutters: Some time after the release of the Priora, it became clear that these windshield edging moldings fit the VAZ 2110, in some cases perfectly, and in others with some modifications.

Priora windshield trim numbers according to the catalog:

1. upper wind window edging 21700 21700-5206070-00
2. windshield edging 21700 21700-5606065-00 left
3. windshield edging 21700 21700-5606064-00 right

Price per piece is about 280 rubles.

This is what they look like in reality. As you may have noticed, in the photo, in addition to the gutters, the upper sealing rubber of the windshield is also shown.

Installation of edging (gutters) of the Priora windshield on a VAZ 2110

If you do not want to remove the windshield, then some modification will be required:

As a result, this is what our top ten with gutters from Priora will look like:

Installing a rubber seal for the Priora windshield on a VAZ 2110

If you removed the windshield, there will be no difficulties with installation. And to install this seal without removing the glass, you will need to try:

1. We remove the upper rubber of the windshield (in most cases, after removing the old seal, there will be a sealant in the middle of the glass that cannot be removed without removing the glass)
2. We install a new seal from Priora (for easier installation, you can use a soap solution and a plastic card)
3. We cut the new rubber in those places where the old sealant remains under the windshield
4. We check for leaks and apply sealant to be sure.

Drains and upper sealing rubber from Priora on VAZ 2110:

Conclusion

Gutters from Priora for VAZ 2110..

Photo source: Key words:

Tuning VAZ 2110. Installing gutters from Priora

In dirty rainy weather, water from the windshield of the VAZ 2110 gets onto the side windows, and all this is due to the fact that the car does not have drains. In this article we will solve this problem. On Priora, the developers took this disadvantage into account and installed deflectors and drains. Plastic linings prevent water from flowing from the windshield onto the door pillars; it is directed to the roof.

In order to install drains on a VAZ 2110, two conditions must be met: remove the windshield and the car must be equipped with a frill of a new type, or we buy a Priora frill. If there is corrosion under the rubber of the windshield, then you must get rid of it. If you don't want to waste time removing the windshield, you'll have to do some modifications. We remove the standard rubber side seals of the windshield, cut out the part of the drain that goes under the glass at an angle, and apply silicone sealant to the inside of the drain that goes into the glass. We attach gutters from Priora. It is possible that the element will have to be cut or glued; all this is determined by the installation location. If the VAZ 2110 is equipped with an old-style frill, then the bottom of the drain will rest. In this case, you need to change the frill or cut it in place.

The upper rubber band of the windshield of the VAZ 2110 is made with an overlap on the roof, because of this it constantly rubs in and over time, moisture accumulates under the rubber band and rust forms. To prevent its reappearance, you need to replace the standard horizontal windshield seal with a seal from Priora. It is smaller in size and does not go over the edge of the roof. In the case when we remove the windshield of a VAZ 2110, the tuning process is greatly simplified. In order to install a new seal without removing the glass, you will need to try. We remove the upper rubber band of the windshield. As a rule, after removing the old seal, a sealant remains in the middle of the glass, which is impossible to remove without removing the glass. We install a new seal from Priora. In order to simplify the task as much as possible, you can use a soap solution and a plastic card. We cut out a new rubber band in those places where the old sealant remained under the windshield. We check for leaks and apply an additional layer of sealant for reliability.

• Author: dedd
• Print

Rate this article: Share with friends!
repair of fixed glazing of the body, replacement of the windshield, trunk lid of the VAZ 2108, VAZ 2109, side windows of the body and rear window of the VAZ 21099

Heated windshield VAZ 2110

Frill VAZ 2110 (removal, installation and interchangeability)

Frill interchangeability

Frill S/O and N/O are completely interchangeable. That is, the fasteners, as well as the windshield washers, do not need modification. However, sometimes when installing a frill of a new type, minor difficulties may arise, for example: gaps may appear between the glass and the elastic of the frill closer to the edges. Which can be eliminated with a file. The appearance of cracks can be caused by two reasons:

1. Low quality lining (jabot).
2. Changed body geometry (especially on cars older than 10 years).

VAZ 2110 with gutters from Priora Photo

The standard upper rubber band of the windshield on the VAZ 2110 is installed with an overlap on the roof. In this regard, it rubs against the metal surface of the roof and rust gradually forms under it. To avoid this kind of problem, it is recommended to replace the standard horizontal windshield seal with a seal from LADAPriora: it does not fit onto the edge of the roof, as it is smaller in size.

If you have previously removed the windshield from your ten, then you will not have any problems installing the seal from LADAPriora. However, if you prefer to install the seal without removing the windshield, you will have to put in a lot of effort:

1. First you need to remove the upper rubber band of the windshield;

2. Using a soap solution and a plastic credit card, install a new seal from LADAPriora;

3. The new rubber needs to be cut where the old sealant remains under the windshield;

4. For complete tightness around the perimeter, apply sealant.

Why did it happen so?

Perhaps the automatic requests do not belong to you, but to another user accessing the network from the same IP address as you. You need to enter the characters into the form once, after which we will remember you and be able to distinguish you from other users exiting from this IP. In this case, the page with the captcha will not bother you for quite a long time.

You may have add-ons installed in your browser that can make automatic search requests. In this case, we recommend that you disable them.

It is also possible that your computer is infected with a virus program that is using it to collect information. Maybe you should check your system for viruses.

If you have any problems or would like our support team, please use the feedback form.

Problems with the arrival of inclement weather

VAZ 2110 side glass

When the rainy season arrives, the following happens:

• the car is constantly splashed with mud;
• all this water mass scatters along the side windows;
• the driver loses visibility into the flow of traffic on the road due to dirty side windows;
• The side mirrors are practically invisible.

This is a design flaw in the domestic auto industry of the VAZ-2110 models. But technology does not stand still; in the age of progressive scientific developments, additional innovations appear on the shelves of auto stores. Thus, kits for side and windshields have appeared on sale:

• top glass edging;
• left glass trim;
• glass edging is right.

Special drain for glass VAZ 2110

These sealing gutters are inserted into the VAZ-2110. The kit is glued to a sealing compound - mandatory for glass. They are inserted under the rubber seals that run along the roof. You can also install gutter moldings. They will perfectly protect the side windows from water and dirt. In addition, in stores selling spare parts for foreign cars you can see a universal windshield deflector, which will also fit the VAZ 2110. It has the following structure:

• corner made of thick rubber;
• size 1x2 cm (narrow corner is inserted under the windshield rubber band).

Note. All these modern protective equipment can serve as reliable protection for side windows from water, dirt flowing from the windshield while driving, etc.

Refinement of gutters on the windshield from Priora

Replacing the slip rings of a VAZ 2110 generator yourself

In order to install gutters from LADAPriora on a VAZ 2110 without modifications, two conditions must be met:

• — the ability to remove the windshield on the VAZ 2110;

• — The VAZ 2110 should have a frill of a new type (or a frill from LADAPriora).

If there is rust under the windshield rubber on your VAZ 2110, then the process of removing it can be combined with installing gutters.

If you are not inclined to remove the windshield from your ten, then to install drains you will need to make minor adjustments to the car:

1. First, you need to remove the standard rubber side seals of the windshield;
2. Secondly, you will need to trim at a slight angle that part of the drain that will later extend behind the glass (shown in the figure below);
3. The next step is to apply silicone sealant to the inside of the drain, extending behind the glass;
4. At the last stage, we snap the gutters from LADAPriora.

If necessary, in order to avoid detachment of the upper corner of the edging, it may be necessary to trim or glue in certain places (depend on the situation).

If your VAZ 2110 car has an old frill installed, then the bottom of the drain will rest and it will need to be cut in place (although it is better to replace the old frill with a new frill - no alterations are required for this).

Do-it-yourself replacement of side door glass

Fastening the side window trim

Necessary:

• Remove the insert from the inside handle of the VAZ window lifter door;
• unscrew two screws of the door handle, three screws of the pocket;
• unscrew the door lock tip;
• remove the door trim using a flat-head screwdriver, as it is attached to plastic clips;
• with mechanical window lifters installed, pick up the clamp and remove the handle;
• unscrew the two nuts on the glass holder;
• remove the seal from the door;
• Carefully remove the glass by tilting it outward.

Note: when removing the trim, place a piece of plastic tube on the end of the screwdriver to prevent damage to the door's paint.

To install the glass in place you need to buy:

• set of clips;
• rubber seal for door windows from the Lada Priora model;
• set of external velvet cover for Lada Priora;
• a piece of raw rubber the size of the glass holder.

Glass installation

Installing side glass

It is necessary to try on the glass in the holder without installing it to the lift. To do this, you need to install the glass in the doorway, the second assistant must hold it. Make a mark on the glass with a marker. Remove the glass and place the top part on a wooden block:

• Place a piece of raw rubber on the bottom.
• Attach the holder to the mark.
• Tap the holder with a rubber hammer until it is completely seated. Place in its place;
• Reinstall all previously removed parts.
• Install clips on the door trim in advance and guide them with a screwdriver into the door holes. Lightly tap into place.
• Install handles.
• Check the raising and lowering of the glass.

The entire procedure should go smoothly. To carry out independent replacement of side windows, it is advisable to watch videos - videos, photos. Also show restraint and accuracy. The price for the side glass of a VAZ-2110 is 180 rubles, a strip of raw rubber is 20 rubles, the cost of velvet covers from Lada Priora is 500 rubles. Therefore, replacing it yourself will bring a lot of pleasure, comfort in the car interior, and will provide an opportunity to save a lot of money. All actions must be carried out according to the instructions described above.