You don’t need practically anything from a tool; you just need a flat-head screwdriver to pry up the plastic clips that secure the hood trim, and perhaps pliers to tighten the nuts of the jets themselves.
- The first step is to open the hood and use a screwdriver to remove the clips securing the hood trim in the places where the jets are located. It is not necessary to completely remove the trim; everything can be done by bending the edges.
- After this, we put our hand under the trim, bending it a little, and remove the hose from the washer nozzle, after which we remove the nozzle from the hood.
- We insert a new one, tighten the nut that secures it, in my case I needed a 12mm wrench, and put the hose back on.
- And this is what it looks like after installing these accessories.
These things are very convenient, since the direction of water flow is adjustable in all directions, unlike cheap options. By the way, I forgot to say about the price: I paid 120 rubles for a couple of these pieces. Adjustable with a thin screwdriver, as I already said, in all directions: right, left and up, down.
After setting up the sprinklers, the effect is simply amazing. Can't compare with factory sprinklers, which were no good at all. Now, when the washer is turned on, the entire glass is completely covered with water and is cleaned instantly over the entire area of the wipers. I think that in the video attached above, the difference between the standard and new fans is noticeable.
My first modification to the car. Two Chinese windshield washer nozzles with the letter “G” on the body were purchased at an auto parts store for 25 rubles each.
Reviews
Delivery of goods is carried out throughout Russia and the CIS:
1. Russian Post (from 350 rubles and above)
Delivery to all regions of the Russian Federation and CIS countries
2. Transport Companies (from 350 rubles and above)
Delivery throughout Russia and the Republic of Kazakhstan
- TK Energy (nrg-tk.ru)
- TC Business Lines (dellin.ru)
- TC SDEK (www.cdek.ru)
- TK PEK (pecom.ru)
- TK KIT (tk-kit.ru)
3. Pickup
The order can be picked up at the office at Tolyatti, 40 Let Pobedy 38, TD “Malachite”, 1st floor.
The waiting time for sending an order in our online store is approximately 2-7 working days, large orders 7-14 working days. days; color of bumpers, mirrors, body parts, spoilers, etc. 7-14 work. days; sewing covers, upholstery, steering wheels, gear knobs, EVA mats, etc. 7-14 work. days.
During this period, we will send you a tracking number by email. email to track the parcel en route.
Payment can be made in the following ways:
1. Payment to a Sberbank card
You can pay using the SBERBANK-Online application and other Bank applications.
After placing an order, making payment, do not indicate comments , we ourselves will understand by the amount of the order and the name of the sender. After receiving the funds, the status of your order will be changed to paid until 17.00 of the current day, or from 9.00 of the next Moscow time.
2. By bank card
Automatic acceptance of payments using MIR Bank cards, VISA International, Mastercard.
You can also pay with credit cards with a grace period.
To select payment for goods using a bank card, on the corresponding page you must click the “Pay for order by bank card” button.
2. Payment to QIWI wallet 89272115207
3. Payment on Yandex.Money 410013993950891
5. Payment to a bank account for legal entities and individual entrepreneurs (commission 6%)
Send your organization's details to [email protected] for invoicing. After paying the bill, be sure to send a payment order.
4. Cash on delivery of Russian Post (commission from 4%)
IMPORTANT! When sending by cash on delivery, RUSSIAN POST will take a commission for providing the cash on delivery service of 150-300 rubles, and the delivery cost also increases due to the evaluation of the goods.
Cash on delivery delivery is possible only within Russia.
ATTENTION! When choosing cash on delivery, the delivery cost is paid in advance before shipment, for the product itself upon receipt.
The amount of the order by cash on delivery should not exceed 5000 rubles; also, painted parts, goods made to order, covers, upholstery, door inserts, EVA mats, steering wheels, etc. are not sent by cash on delivery. (minimum 50% prepayment).
Be sure to save the payment receipt or a screenshot of the transfer.
The best guarantee of order fulfillment and quality is the feedback from our customers.
Reviews of our work can be found in our VKontakte group https://vk.com/topic-136384247_36675422?offset=180
What types of malfunctions are there?
In fact, there are not so many problems, and they are divided into electrical and mechanical. Most often, problems arise in the mechanical part. Mechanical problems are simple, the first problem is lack of fluid. That is, it either simply ran out in the tank, or froze due to the low temperature. In the first case, you just need to top it up, and in the second, warm up the engine well, and its heat will defrost the liquid.
The hose could also have come off; it needs to be installed back, and the problem is solved. And the most common problem is clogged injectors. They can become clogged due to the use of low-quality fluid or due to the ingress of dust and weight.
Poor flow can also be due to problems with the pump or seals, so you should find out what the problem is.
Possible damage to the windshield washer
Washer failures are divided into electrical and mechanical. Mechanical faults are much more common than electrical faults, however, and they are much easier to fix.
We list the malfunctions that arise for mechanical reasons:
- The washer fluid in the reservoir has run out. If there is no fluid in the reservoir due to damage, it is recommended to replace it immediately. In addition, the fluid can freeze if it is selected incorrectly (for example, when using washer fluid in winter intended for use in summer).
- Perhaps the hose came off the jets, or it was crushed.
- Liquid cannot pass through the nozzles. This is possible if there are any foreign impurities in the washer fluid, but it happens that the injectors are simply clogged with dirt.
The second group of reasons leading to incorrect operation of the washer includes electrical faults. Let's list them:
- Blown fuse.
- The washer motor is not receiving power. In this case, the cause of the breakdown lies in the washer terminals, which will oxidize over time and sometimes fall off. Such a malfunction is detected by visual inspection.
- Broken relay, faulty wiring, switch or washer motor. Such a breakdown can be calculated using a multimeter connected to the terminals of the electric motor. The absence of voltage will confirm the presence of a breakdown. In cases where there is voltage, but the washer still does not function, we can conclude that its motor is broken, which will need to be replaced immediately.
- The pump terminals are oxidized. As noted just above, the terminals oxidize during operation, which in turn leads to the cessation of fluid pumping due to a failed motor. It is possible to restore their functionality; for this purpose, the oxidized terminals must either be cleaned or replaced with new ones.
Replacing injectors
In order to replace the washer nozzle on a VAZ 2114, you need to:
- Open the hood.
- Remove the upholstery and remove the plastic clips.
- Remove the foam pads secured with adhesive tape.
- Detach the plastic parts covers.
- Disconnect the hoses from the old injectors.
- Remove the old injectors and connect hoses to them.
- Install check valves “in the cut” of the hoses.
- Check system functionality.
At the same time as replacing the nozzles, it is recommended to replace the hoses through which the washer fluid flows. The soft hoses sold in aquarium stores performed well in this role.
VAZ 2114 washer nozzle diagram
After the new nozzles are installed, they should be configured.
To do this you will need:
- insert a pin or needle inside the nozzle;
- if the liquid hits the glass too high, lower the nozzle down;
- if the liquid gets too low, raise the nozzle up.
You can make horizontal adjustments in the same way.
For foreign-made three-jet injectors, the recommended setting is as follows:
- the side external nozzles should be directed towards the lower corners of the glass;
- the middle nozzles should wash the central part of the glass;
- the internal nozzles should be directed towards the top of the glass.
True, this setting scheme is only a recommendation, and each driver can change it at his own discretion.
Fresh questions for auto repair shops (replacing windshield washer nozzles for vaz lada granta) in Moscow
I want to write a review about this service. I am repairing my Zafira there, the most important thing is that there is no deception there, they don’t impose anything, they don’t scam me. Vice versa! Warn against unnecessary spending! About the quality, I can say something about what they did.
Good afternoon do you have a vibration stand?
Hello! I need to replace the rear brake pads on a Peugeot Partner Teepee. Is it possible to do this at your place and what is the price for such work? Thank you.
Hello, please tell me how much it costs to repair the front axle gearbox of a 2005 Tuareg? And when can you come?
Adjustment
To understand how the nozzles on the Vesta are adjusted, you need to understand the design of the device. The mechanism is housed in a plastic case. The basis is made up of nozzles through which liquid is supplied and sprayed onto the glass under pressure. The desired direction is given using a regular needle.
The process of setting up the Vesta washer nozzles comes down to the following: carefully place the needle inside the hole, adjust the angle of inclination, changing the direction of the jet. At the same time, it is important not to overdo it, without underestimating or significantly increasing the indicator.
Lada Kalina Hatchback r2d2 › Logbook › Replacing washer nozzles
Replacing windshield washer nozzles has been discussed and described more than once or twice. I decided to experiment too, because... The factory ones really left much to be desired. Before the experiment:
I bought two jets, presented by the seller as “coming to the viburnum from the factory”, installed it, it seemed fine, started adjusting the direction of the jet, one eye remained on the needle) I threw it away until it was clogged, installed it and cleaned the old ones.
Experiment:
Today, while looking for marigolds (next blog entry), I simultaneously took 80 rubles. the thing is fan-shaped injectors in auto plastic, when asked why they are so damn cheap, guy - so from Volvo, so from Volvo for 500 rubles a set - pfft, well, they’re also not bad, okay, I took it. What pleased me about these cheap ones was the presence of gaskets for each injector with a right angle and a positive one:
Before that I bought check valves, I don’t know why, I read too much. I bought aquarium ones, but more expensive, on Botevgradskaya, Tetra-cv4, 120 rubles each. thing:
I bought engine compartment pistons and went to my dad to install them. I decided to try first with a thicker gasket, with an increased UVN, they fit into the hole on the hood normally, but the thread clung confidently to the hood, you don’t even need to screw it with a nut from below. It sprayed, the upper part of the sprayed torch of the nozzle smoothly bending around the windshield evenly and evenly lay on the entire surface of the roof in an even layer. Damn beautiful, but it was too long, I installed it with even gaskets, it seems normal. Next I want to test the mod. valve, I open the package, blow out both valves, I don’t really like the blowing speed. For now, I decided to test the entire system with one valve, if possible with one, even more so with two for each nozzle. I cut the hose near the tank a little, taking into account that without the appendix it would reach the pump, sprayed, great, sprayed again, nothing. The tips on the valves are tapered, the hose is torn off. Screwed with wire:
What are fan injectors on a car?
Often modern car manufacturers prefer to use just such nozzles for cleaning glass in their cars. The main difference between fan devices and their analogues is the water supply technology, which involves applying it to the glass for cleaning in an area of small drops instead of several separate jets.
The most common fan type glass cleaners are those from Volvo, but there are many alternatives. For example, Toyota business class models, which also contain such devices, have recently become popular. It is worth noting that the kit always includes only one nozzle, and therefore in the process of selecting a suitable product from the catalog you will need to place two orders at once.
Fan washer nozzles VAZ
Details Category: Repair Published 07/23/2014 Today we’ll talk about fan washer nozzles for VAZ cars.
You can install various washer nozzles on VAZ :
- single-jet
- two-jet
- fan
Most often, our cars come from the factory with simple single-jet injectors.
Their pressure and range of action are often not enough to properly clean the entire windshield, so many people install two-jet nozzles (for example, these are found on Chevrolet Niva cars).
However, the most effective solution is fan washer nozzles . They differ from ordinary ones in that they spray water not in a stream, but in a wide fan that wets the entire windshield of the car.
The problem is that it is difficult to find standard VAZ fan washer nozzles . To get out of this situation, there are several options.
- Buying cooperative injectors at the car market. In car markets you can often find a large number of different variants of fan injectors, but the quality of their work is often far from ideal and the percentage of defects is too high. But the price for such nozzles starts from 10-20 rubles.
- Installation of fan washer nozzles from Volvo. This is the most expensive option; a pair of such nozzles costs about 500-600 rubles. You can order them in various online stores, part code: Volvo 30655605 Washer nozzle 2 pcs. But even here, not everything is so simple, the mounting diameter of these nozzles is slightly larger than the standard ones, so they will have to be adjusted on site during installation.
- Purchasing VAZ fan washer nozzles through online stores. For example, 2 injectors for a VAZ in the Alamar online store cost 150 rubles. At the same time, they are of fairly good quality and fit in place of the standard ones without modifications.
The video below shows the operation of fan washer nozzles on a Lada Kalina car.
Two years of operation have revealed their pros and cons.
Pros:
- wet the entire windshield at once
- allow you to clean the entire glass in a couple of wiper strokes
- do not require adjustment during operation
Minuses:
- in winter, when using non-freezing liquid, which thickens in the cold, the pressure through the nozzles weakens; in frosts below 30 degrees they begin to work like jets
- Water consumption increases, but not much, since the glass is cleaned in less time than with standard nozzles.
In general, we can say that fan-shaped washer nozzles on VAZ cars have more advantages than disadvantages.
