Owners of a Lada Vesta car sometimes encounter difficulties using the on-board computer, as the software that monitors all the main functions of the car is proudly called. With the help of BC you can adjust the volume of the turn signal, find out the current fuel consumption, check the operation of the cruise control system, and even have a complete understanding of the voltage of the operating network.
To cope with this difficult task, it is enough to use the manual for regular use of the car, a copy of which is usually provided with the new Vesta.
Setting the clock on the Lada Vesta on-board computer
In order to enter the clock setting mode, you need to use the top button of the on-board computer (), by long pressing this key you will get to the mode you need, how can you determine that you are already there? This is very simple, if you are on the right track, then the on-board computer should leave on its display only the numbers responsible for the current time, and one of these numbers (the first from the left) will flicker continuously. Each time digit is adjusted separately and does not depend on each other; in order to adjust the first digit, use the on-board computer buttons (,↓) with short presses. As soon as you set the first digit, move on to the next one; this can be done by long pressing the top button of the on-board computer (). Do these steps with each digit, then leave the time setting mode.
Final nuances and completion of work
Using the same scheme, we change the values of tens of minutes and minutes.
The current time has been set, all that remains is to record it . To do this, it is important to correctly exit the editing mode without resetting the device readings again. You need to hold the arrow up not for a short time, but for a long time. Everything is ready, the time is set, the clock is set.
According to its principle, the procedure for setting the clock on the Lada Vesta is not very difficult. If you have basic skills in using “antediluvian” electronic watches from the end of the last century, then everything will work out great. You don’t have to turn to specialists, but set it up as needed with your own hands.
source
Direct time setting
The time is set according to this scheme.
You need to enter edit mode . To do this, you need to press and hold the “up” arrow for about three seconds. At this moment, only the numbers “0.0 km” in the second line from the left of the display will start flashing on the screen. While in edit mode, you need to press the same arrow once. The clock indicator on the screen will blink, for example, “08:35”.
You will need to hold down the top key again for a few seconds to start changing the clock.
Only the first digit “0” from “08:35” will begin to pulsate. Now you can use the arrows to change the readings of tens, of which we only have two. To go to the hour units, hold down the “up” button again for a couple of seconds, after which “8” will begin to pulsate. Using the joystick we set the numbers we need from “0” to “9”.
Options for replacing the standard BC
There are many models from different manufacturers on the car computer market. Unfortunately, most of them cannot be used for Lada Vesta due to incompatibility. But there are BC models that are adapted to various AvtoVAZ models and have proven themselves well. Such brands include Multitronics. The company produces on-board computers for a wide range of cars, with advanced diagnostic functions, navigation, audio and TV systems.
The models produced have various mounting options, and at the owner’s request they can be placed on a dashboard or secured in other convenient places. Below are Multitronics BC models with different types of mounting.
Multitronics VC730
Multitronics TC 750
In addition to the above functions of a standard computer, Multitronics has very useful additional ones:
Displays information about vehicle malfunctions, errors, their codes, and also duplicates this message in voice mode. Sends a voice notification to the driver about the need to refuel the car. Conducts quality control of the filled fuel and displays an alert on the screen. Reminds the driver to turn off the lights or low beams. It is a full-fledged navigator. Allows you to use multi-channel television. Automatically maintains the set temperature in the cabin. The Multitronics on-board computer has a fairly large convenient screen, simple controls and a user-friendly interface. For owners of domestic cars and, first of all, for owners of various modifications of the Lada, a special model “Multitronics Comfort” has been developed.
Along with the BC models presented above, there is also computer equipment of the domestic brand "STAT" (Tolyatti), widely used on AvtoVAZ models. All of the company's products are adapted for installation on domestic cars, primarily Lada. The SHTAT brand BC has a backlit liquid crystal display and a convenient mount on the car dashboard. Below is a model of an onboarder from this company.
What does the model look like?
Connection of on-board computers is carried out by connecting the standard cable of the electronic control unit (ECU) to the OBD-II diagnostic connector in accordance with the instructions. After successfully installing the BC and connecting it to the ECU, you need to configure the onborder.
To do this, you need to start the engine and select a “custom” mode from the two offered on the display so that the type of ECU unit is automatically detected. To read sensor readings, you need to set “automatic selection” in the menu, and the computer will begin to receive information about all components of the car. Diagnostics will be carried out in accordance with the protocol corresponding to the machine model. The next stage is entering data into the BC that allows the computer to fulfill its functional purpose: the desired temperature in the cabin, the route and other parameters according to requests that will be displayed on the screen.
Description of functions
A review of the Lada Vesta on-board computer shows which parameters are displayed on the display or front panel display. This makes the life of a Lada car enthusiast much easier. On Vesta, the standard on-board computer shows the following information, in addition to error codes:
- The magnitude of the vehicle network voltage;
- Cruising range on fuel in the gas tank;
- Current and average fuel consumption;
- Remaining fuel in the tank;
- Travel time along a specific route;
- Average speed;
- Watch;
- Total mileage;
- Controls the outside air temperature;
- Gives gear shift hints (with or without sound);
- On a Lada with cruise control, information about the installed parameters is displayed;
- If there is an AMT, the gear engaged or the auto - manual mode is displayed.
On-board computer Lada Vesta The on-board computer on the Lada Vesta is configured using two keys on the right steering column switch. Using the keys, entering the menu, you can control the readings of Vesta BC, displaying the necessary data on the control panel. Thus, the driver constantly has the opportunity to control the required parameters of Vesta.
Changing the sound of the turn signals
The factory provides settings for the volume and tone of the direction indicators (it does not work on the instrument cluster), however, the car’s operating manual does not say anything about this possibility.
Procedure
:
- We enter the settings menu by pressing and holding both keys of the on-board computer for about 5 seconds.
- The SOUND menu appears.
- Setting “p1” - the volume of the sound of the turn signal turning on
- Setting “p2” is the volume of the switch off.
- Setting “d1” is the key that turns on.
- Setting “d2” is the tone of the switch off.
- Switching between settings is a short press of two keys.
- To exit the menu, press and hold two keys for about 5 seconds.
The easiest way to set up is with the emergency lights on.
Video instructions:
Are you satisfied with the functions of the Lada Vesta on-board computer? Let us remind you that other operating instructions for this vehicle can be found in this section.
Keywords: Lada Vesta on-board computer | dashboard of Lada Vesta
Share on social networks:
Found an error? Select it and press Ctrl+Enter..
Main functions and capabilities of the Lada Vesta head unit
Firstly, the radio tape recorder 100% fulfills its purpose - it plays music files and radio. Music can be listened to via AUX, SD card or via USB devices that can be connected as a file drive. You can also connect the radio via Bluetooth to your phone and play music on your car speakers.
Secondly, the radio displays the time on a monochrome display.
Thirdly, it has a Hands free function.
As you can see, the radio has all the necessary functions for comfortable listening to sound.
Cost of maintenance of Lada Vesta in 2021
The price for LADA Vesta maintenance may vary among dealers in different regions. It is also different for individual trim levels of the base model.
Lada Vesta in the showroom. Photo source: https://zen.yandex.ru/media/ladaonline/chto-luchshe-bazovaia-lada-vesta-ili-lada-granta-liuks-5cb312b568a9c800b4381c37
Average prices for 2021 in Moscow and the Moscow region (work only, without the cost of replacement consumables, in rubles) for Vesta sedan, station wagon, SV Cross models:
- TO-1 – 6600;
- TO-2 – 8800;
- TO-3 – 6600;
- TO-4 – 8800;
- TO-5 – 6600;
- TO-6 – 17700.
The same for the Vesta Sport model:
- TO-1 – 7100;
- TO-2 – 9200;
- TO-3 – 7100;
- TO-4 – 9200;
- TO-5 – 7100;
- TO-6 – 18200.
The cost of maintenance for a Lada Vesta from an official dealer is still less than that of its classmates produced in Russia. You can compare the cost of maintenance of 1 Lada Vesta with its analogues.
Protection of the obd vesta diagnostic connector from theft
Criminals can use the diagnostic connector to steal Vesta. They break into the driver's door, connect to the OBD input, remove the vehicle's security, and start the engine without having the ignition key. To protect the car, you can block access to the 16-pin window (as you remember, it is not covered by anything).
Protection for contact with the “brains” from the interior looks like a small metal box with holes for bolts. The cover consists of two parts, one of which is removable (so that you can use the contact at any time). The protection is attached with a bracket to the internal pillars of the dashboard, and its two parts are connected to each other with turnkey bolts in the form of “secrets”. Every year, manufacturers come up with a new type of secret key to make their product even more secure.
Maintenance regulations for Lada Vesta: features
Each car owner operates his car at his own individual rhythm, so it is impossible to determine a single annual mileage rate for all drivers. AvtoVAZ has set the frequency of maintenance of its cars in such a way as to take into account the interests of both those who spend most of their lives behind the wheel and those who get into the car a couple of times a week.
Maintenance of Lada Vesta. Photo source: https://www.drive2.ru/l/539417107125764692/
Therefore, the moment when it is time to go to the service for the next maintenance of the Lada Vesta was established in two ways:
- every 15 thousand kilometers;
- no later than 12 months after the previous repair.
You need to base it on what happens first.
Fake carbon fiber and a real pipe
The bucket seats are surprisingly comfortable. You sit deeply, as if you were not in a Lada car. Red accents enliven the rustic interior of the Vesta, but the carbon fiber inserts look cheap; it would be better if they weren’t there. The steering wheel is trimmed with pleasant leather, the finish of the lever is rougher, and the lever itself, with its length and strokes, seems to come from another, not at all sports car.
The rear bench is also trimmed in a red-black leather and Alcantara combination, but that's the only difference. Vesta Sport has the same 480-liter trunk as a regular sedan, so cargo and passenger capabilities have not changed. However, towing a sports trailer with the Vesta is not provided.
The interior of the Hyundai i30 N is decorated sparingly - a little chrome, a little black gloss, but it looks expensive and of high quality. The fact that this is a sports version is indicated by the letter N on the dashboard, gear lever, seats, and floor mats. Plus frivolous buttons in gray-blue color, like the body. They select driving modes.
The driver's seat, upholstered in leather and Alcantara, looks more modest than West's, but when cornering it holds the body tighter and is more comfortable during normal movement. It even has an adjustable cushion length. The back row of the i30 N seems more cramped, but the sofa in the Korean hatch is more comfortable and, unlike Vesta, is equipped with a folding armrest. Between the backrests and the trunk there is a tubular strut that strengthens the body. It seems to be deliberately exposed and limits the loading capabilities of the car. However, it is unlikely that anyone will carry a refrigerator in the i30 N.
Deactivating daytime running lights
Daytime running lights on the Lada Vesta turn on automatically - you just need to turn the ignition switch to two extreme positions. DRLs were invented in order to increase traffic safety on the road, but we must admit that even, for example, at night they shine quite brightly and are sometimes completely inappropriate.
An example of this is an alarm system with auto start. If the owner activates this mode, then at night those around him will already know that the car’s engine is running - this increases the risk of vandalism or even theft. Therefore, some owners of domestic compact cars decided to turn off the DRLs.
This is done very simply. You just need to set the steering column lever to an intermediate position between 0 and the “dimensions” label. That's it, daytime running lights will not work for us when the ignition is activated.
Did you like the article? Subscribe to the channel to stay up to date with the most interesting materials
Installing a third-party computer
In the Lada Vesta model segment there are modifications that are not initially equipped with an on-board computer. Today this is not a problem, since a similar device is available for sale. The owner purchases it, and the station masters carry out the installation and connection. You can perform this activity independently, but this will require knowledge and experience.
Almost all models of on-board computers support the specified parameters, and some of them are capable of reading and displaying fault codes (errors).
Alternator belt Kalina 8 cl size
Towbar Kalina station wagon
Reverse gear does not engage on Kalina
