Shock absorber struts are one of the key components in a car's suspension. They are responsible for the car’s stable behavior on the road, smooth out uneven surfaces, and dampen vibrations when driving over potholes. Owners of domestic VAZ cars change the front and rear struts with different intentions. For some they quickly failed due to frequent off-road driving, while for others they lack the rigidity of the original units. The fact is that the manufacturer equips cars with oil shock absorbers at the factory. They make the car soft, which is good for leisurely driving on dirt roads. And drivers who prefer a sporty driving style experience strong swaying at high speed. At certain moments the illusion of riding on 2 wheels is created. What types of shock absorber struts are there?
- The most affordable option would be oil-filled front and rear struts. Hydraulic units are perfect for quiet driving on country roads and busy city streets.
- If you put gas-filled struts on a Lada, the car becomes rigid . It's great to drive on high-speed roads without slowing down on corners. But driving on dirt roads will quickly lead to their breakdown.
The price of the struts also depends on the manufacturer of the shock absorbers. However, here every car owner needs to look for his own parity of price and quality.
Our rating presents the best companies that produce front and rear pillars for cars of the VAZ family. The review was compiled based on an analysis of reviews from owners of domestic cars.
FENOX
Best price Country: Belarus
The Belarusian concern FENOX Global Group unites a number of enterprises that specialize in the production of spare parts for cars. The first parts were made for VAZ cars. Oil racks are produced for timeless classics, Niva SUVs, eights and nines. The products have an affordable price and good quality. The consumer is offered both front and rear shock absorbers. All parts are subject to strict control at the factory, so you rarely hear about defective racks.
Domestic motorists note the good stability of their cars when installing Belarusian shock absorbers on them. The car behaves better on the road and allows you to take turns at higher speeds. Oil models stand up well to the test of Russian winter. Frequent off-road driving may limit the service life to one year. Also among the disadvantages, car owners note the rapid appearance of oil leaks.
The best manufacturers of racks for VAZ
The same manufacturer of racks produces models of different rigidity and different designs, so it is not entirely correct to choose the best models - it is much more important to talk about the manufacturers: the quality of their products, the range of racks and other advantages and disadvantages. Accordingly, we decided to make a rating of the 6 best manufacturers of racks for VAZ cars. When compiling the list, we were guided by the manufacturer’s popularity among motorists and customer reviews.
| Photo | Name | Rating | Price | |
| #1 | SS20 | ⭐ 100 / 100 48 — votes | Find out the price | |
| #2 | Demfi | ⭐ 99 / 100 14 — votes | Find out the price | |
| #3 | LADA | ⭐ 98 / 100 18 — votes | Find out the price | |
| #4 | "ASOMI" comfort pro | ⭐ 97 / 100 7 — votes | Find out the price | |
| #5 | KRAFT | ⭐ 96 / 100 6 — votes | Find out the price | |
| #6 | Trialli | ⭐ 95 / 100 5 — votes | Find out the price |
What racks would you choose for the VAZ 2114 or what would you recommend?
Take the survey
Trialli
Trialli is a manufacturer from Russia that produces parts for domestic cars. The company also works with the car’s shock-absorbing system and suspension. We have both front and rear struts for VAZ cars on sale. Moreover, the racks are not sold as a set, but separately. Accordingly, it is possible to purchase only the right or only the left strut for the front or rear of the car. This need arises if only one of the racks needs to be replaced. Another advantage of Trialli stands is that they are collapsible.
For the VAZ 2114, racks that are suitable for the VAZ 2108 model are suitable. The cost of one rack for the left or right side is about 2,500 rubles.
Trialli struts for VAZ 2114
Model characteristics:
- type of shock absorber: oil;
- shock absorber type: twin-pipe, hydraulic.
pros
- collapsible racks;
- can be purchased for one side;
- easy to find in stores.
Minuses
- you may get an unsuccessful copy;
- rapid wear and quality complaints from users.
Trialli car racks
KRAFT
Kraft is a foreign manufacturer that produces racks for the VAZ 2108-VAZ-2115. The company is not as famous as the previous ones, but it has one undeniable advantage - the cost of spare parts. KRAFT racks cost one and a half times less than racks from other companies, while the quality of the products remains high. Unfortunately, there are also disadvantages - the lack of separation of models by degree of rigidity and rod length. But the struts can be purchased separately, and not together with shock absorbers. At the same time, left or right racks are sold.
The KRAFT KT073525 model is suitable for the VAZ-2114.
KRAFT racks for VAZ 2114
Model characteristics:
- type of shock absorber: gas.
pros
- good resource;
- budget.
Minuses
- limited model range.
KRAFT car racks
"ASOMI" comfort pro
One of the most popular manufacturers of shock-absorbing equipment in Russia. Focuses on domestic cars, including LADA, VAZ. There are also models of racks for foreign cars. Like other manufacturers, Asomi divides its stands according to the degree of rigidity. Manufactures hydraulic and gas struts for cars. There are models with a shortened rod to lower the car, as well as options with a normal length.
Any Acomi pillars from the Lada Samara series are suitable for the VAZ-2114. We recommend taking a closer look at the “SPORT” series without lowering - these are ideal struts for a car that will be used in city or highway conditions.
"ASOMI" racks for VAZ 2114
Model characteristics:
- type of shock absorber: gas.
pros
- wide range of models;
- good workmanship;
- distributed on sale.
Minuses
- most suitable models lower the car.
Struts and shock absorbers for VAZ 2114
LADA
The car manufacturing plant still produces original parts even for older car models. In particular, Lada continues to produce original struts for the VAZ2108-VAZ-2115. The advantage of these models is that they are original, so the car will have the same driving characteristics as before the repair. Also, the original racks are distinguished by their low price, high-quality assembly and simplicity of design. Stands sold separately, including left and right.
LADA racks for VAZ 2114
For the VAZ-2114, struts from 2108 are suitable. The model range does not imply a division of struts according to rigidity; accordingly, all models correspond to the same rigidity as the original struts from the factory.
Model characteristics:
- type of shock absorber: gas.
pros
- inexpensive;
- high-quality assembly;
- repeat the original driving characteristics.
Minuses
- limited model range.
LADA car racks
Demfi
The Demfi company is a Russian manufacturer of shock absorbers and struts for domestic cars, including the VAZ brand. The company’s model range includes struts with different characteristics and varying degrees of rigidity: “Comfort”, “Drive”, “Premium”, “Original” - these are series of shock absorbers (and struts) that are produced at the manufacturer’s factories. The advantages of the company are that their products are available throughout the CIS (Russia, Ukraine, Kazakhstan, etc.) and that the cost of the suspension kit is low. It is worth considering that most often Demfi supplies struts complete with shock absorbers, and we are talking specifically about front struts, so kits most often appear on sale.
Demfi racks for VAZ 2114
A set of shock absorbers and front struts for the VAZ 2108 is an ideal suspension model for our purposes, because it corresponds to the price-quality parameter and is suitable for the VAZ-2114.
Model characteristics:
- type of shock absorber: gas.
pros
- easy to find in stores throughout the CIS;
- the price corresponds to the quality;
- developed model range.
Minuses
- A-pillars only;
- sold complete with shock absorbers.
Demfi car racks
SS20
SS20 produces the most advanced racks for VAZ. The company has a wide range of racks. The car owner can choose a strut based on its rigidity and suspension height, which allows him to tune the car at his own discretion. CC20 racks have the best quality among all models in Russia. This is confirmed not only by the manufacturer’s four-year warranty, but also by positive customer reviews. Considering the cost of the racks (comparable to the cost of racks from other manufacturers), this is the best choice for the VAZ 2114 car.
SS20 racks for VAZ 2114
It is difficult to recommend a specific model, since the driver can independently choose the degree of suspension stiffness and its length. For those who cannot decide, we recommend a model from the “Standard” series - the golden mean between the indicated parameters.
Characteristics:
- type of shock absorber: gas.
pros
- high build quality;
- nice price;
- the widest model range:
Minuses
- stands are sold only in sets.
SS20 car racks
DELPHI
Toughest oil rack Country: UK
The largest manufacturer of auto parts in the world is the British company Delphi Corporation. It is the main supplier of components to the General Motors assembly line. The British made hard oil shock absorbers for domestic VAZ cars. They allow you to experience the pleasant emotions of sporty driving, without the fear of flying into a ditch. Front and rear pillars are offered to owners of the VAZ-2110 model range. Products are manufactured on modern high-precision equipment, using innovative technologies and high-quality materials.
Consumers who managed to install British shock absorbers note the excellent stability of the car on the road. Severe operating conditions in Russia significantly reduce the service life of DELPHI racks. On average, motorists manage to drive about 200 thousand km, but knocking noises appear in the components after driving 150-170 thousand km.
How to choose a shock absorber for a VAZ 2110
So, the owners note that the factory racks on the VAZ 2110 are not the most reliable option and have rather “average” performance. At the same time, the front struts of the VAZ 2110 usually fail much earlier than the rear shock absorbers.
In practice, the factory solution has relatively little rigidity. On the one hand, the smoothness of the ride improves slightly, but on the other hand, stability and controllability can be deteriorated. The car “rolls” in corners, nods when braking and sways excessively even on small bumps.
Also, often after several thousand kilometers, standard struts begin to “sweat”, then the shock absorbers begin to tap slightly. A slight knocking sound can persist for about 15-30 thousand km. and has a greater impact on comfort.
However, the struts continue to leak, and a constant and obsessive knock appears (the strut begins to knock even when passing minor defects in the road surface). In this case, the already not the best handling deteriorates noticeably, and problems with braking and maintaining stability may arise. This indicates that the shock absorbers are failing and need to be replaced.
- So, at this stage, you can simply take the factory shock absorbers and continue to operate the car. However, the behavior of the car on the road cannot be changed. Of course, if you compare a new and old shock absorber, improvements after installing new struts will be noticeable, but you should not expect any pronounced effect after replacement.
If the owner needs to not only buy struts for a VAZ, but also select VAZ 2110 front struts and/or rear struts that will be better than the factory ones, you need to look for other solutions. First of all, it is important to pay attention to the characteristics of the racks themselves.
To improve stability and handling at high speeds, you need to look for so-called “gas” shock absorbers. However, their disadvantage is their higher price and sometimes excessive rigidity.
For this reason, many drivers install gas struts on the front axle and gas-oil or oil struts on the rear. You can also use the option when gas-oil is installed in front, and hydraulic oil shock absorbers of one brand or another are installed in the rear.
Let us also add that in addition to the struts, springs often require replacement. Only a comprehensive replacement allows you to obtain the desired result and balanced indicators in terms of comfort and controllability. As practice shows, among different manufacturers, SS20 struts are the most popular for VAZ for a number of reasons.
Also, VAZ 2110 owners install Acomi parts. This manufacturer also produces reliable parts, but a less loyal warranty policy makes this solution not the most optimal. For this reason, owners of VAZ models highlight the SS20 as the best option.
PILENGA
The most stylish stand for VAZ Country: Italy
Many European car factories use components from the Italian company PILENGA. All parts and components, from brake discs to racks for VAZ, have their own unique style. The company's catalog contains more than 800 product items, among which there was a place for domestic cars. All components meet the requirements of ISO 9001 or TS 16949 certificates. Italian developers have introduced the latest advances in the field of metallurgy and machining.
Russian roads are a good testing ground for PILENGA. Some car owners managed to install front and rear struts from this manufacturer on their cars. In gentle conditions, they can withstand a mileage of 20-30 thousand km. But in more difficult conditions, oil leaks immediately appear, and final failure occurs after 8-10 thousand km.
BELMAG
Best hydraulic strut Country: Russia
Until recently, a young enterprise from Magnitogorsk rented space for the production of auto parts. Today BelMag occupies a leading position in the country, operating at its own industrial site. The assortment includes a wide range of suspension parts, steering gear, transmission, and brake systems. Deliveries are made to domestic car plants VAZ, GAZ, and are also exported. Front and rear hydraulic struts for passenger cars are reliable and durable. Thanks to an extensive dealer network, the products of this company can be purchased in the most remote regions of the country.
Consumers note the good performance of shock absorbers on unpaved roads; the car rides smoothly over uneven roads and potholes. Excessive softness appears on the asphalt surface, which causes swaying at speeds of more than 90 km/h.
TRIALLI
Best conical spring strut Country: Italy
The Italian company TRIALLI produces spare parts for cars and trucks. The product line has two versions, one for the middle class and the other for the premium segment. For VAZ cars, the company produces high-quality struts for conical springs. Thanks to the management system and compliance with international quality standards, spare parts withstand off-road driving well. Trialli products are recognizable by their convenient and reliable packaging. It fully protects the parts during transportation.
Kalina owners note that it is better to install such racks on cars that drive a lot on dirt roads. The shock absorbers are softer than standard units, so driving on poor surfaces is more comfortable. But when cornering, the roll has noticeably increased.
Let's sum it up
Today you can find many interesting options for shock absorbers for the VAZ 2110. The car is transformed, receives really many useful characteristics and is one of the most interesting options for a buyer in the budget class on the secondary market. Today, stock “Tens” are asking very little money, because the owners of these cars are trying to purchase more expensive vehicles of foreign origin or exchange their 2110 for a newer AvtoVAZ invention. But for novice drivers or for a work trip, the car is quite interesting, reliable and of high quality.
By installing good shock absorbers on a VAZ 2110, you will feel how the car has changed in movement and has become unique in all its characteristics. The vehicle will receive many new sensations when traveling and will become closer to your understanding of the ideal car. However, shock absorbers do not change the fact that the car has a lot of childhood problems that will have to be solved additionally.
What are the best shock absorbers to install on a car when replacing?
Which racks to choose for the Lada Granta - install normal spare parts
SACHS
Longest warranty Country: Germany
The largest European manufacturer of shock absorbers and clutches is the German company SACHS Handel GmbH. Production facilities are located in 17 countries around the world. Its range includes more than 6,000 types of spare parts. The company provides a two-year warranty on all products. Thanks to this responsible approach, such well-known automakers as Mercedes, VW, Volvo, and BMW have become consumers. Manufacturers of shock-absorbing struts and the domestic auto industry also paid attention. There are two versions to choose from. The standard blue stripe shocks are from the SuperTouring series. Stiffer struts with a red Advantage stripe are designed for sporty riding.
Those who installed these gas shock absorbers on VAZ cars note the good stability of the car on any road. When purchasing, it is important not to buy a fake in hopes of saving some money.
FINWHALE
The most versatile stand Country: Germany
The FINWHALE company is part of the famous German concern Grunntech GmbH. Auto parts from this company have been sold on the domestic market since 1998. They quickly gained popularity among domestic motorists due to their high quality, thoughtful design and reasonable prices. Products under the Finval brand are produced at the most advanced factories in Europe. The main partners of the German company are many auto giants, from Volkswagen to General Motors.
Domestic car owners speak positively about the universal properties of Finval struts. It is enough to install this unit on the VAZ in order to subsequently change only the cartridges (there are oil and gas).
The cost and place of purchase of the shock absorber are important points
If you decide to install Koni shock absorbers on your VAZ 2110 - one of the world's most famous manufacturers of automobile spare parts for suspension, it is better to give preference to official dealers. However, even Asomi stands are counterfeited quite actively. China is very boldly entering the Russian car parts market. The Chinese offer the names Asomi, KBY, Delfi and Demphi, copying well-known global brands. Ultimately, parts sellers use such features to show a non-existent connection between the Chinese manufacturer and the real brand. When buying shock absorbers at a car store, try to check the following features of the part:
- the presence of official accompanying documents that must be present for each part, they indicate the features and place of production of the product being sold;
- technical specifications and certification certificates indicating the serial number of the shock absorber model are factory documents that are generated during production;
- all the necessary logos are stamped on the case in the usual manner for the manufacturer - it will be useful to obtain and examine obviously original brand spare parts before going to the store;
- the store is quite large, is a dealer of many brands and offers only original spare parts from manufacturers without fakes or copies;
- The company's assortment does not contain low-quality spare parts that cost several times cheaper than factory equipment; such parts are not offered to you.
It’s a good idea for the store you choose to be a dealer of the brand whose products you want to purchase. However, this is not necessary. In most situations, high-quality automotive stores with a fairly large assortment of factory parts for sale are a completely reliable place to purchase spare parts. If the place where you buy the shock absorber is famous for Chinese counterfeits that pass off as normal shock absorbers, you will not be able to buy adequate parts there. So sometimes it’s better to overpay and order delivery of shock absorbers from an official dealer. We invite you to watch a video on the topic of replacing shock absorbers on a car of the tenth family:
