Car modifications
The VAZ-2112 model during its production period underwent many changes and various modifications, not all of which were popular with consumers:
- 21120 – engine with the same number as the modification, with 16 valves according to the standard GLI luxury version of one and a half liters;
- 21121 – engine 21114, 1.6 liters with 8 valves;
- 21122 – engine 2111, volume one and a half liters, with 8 valves, budget version with 13 discs, without power windows, with non-ventilated brakes 2108;
- 21124 - with an engine of the same marking as the modification, but with 16 1.6 liter valves. It was produced until 2008. Despite the problem with valve bending, which was solved almost after the car was taken out of production. To achieve engine displacement from 1.5 to 1.6, the cylinder block changed significantly, becoming 2.3 mm higher, which accordingly affected the dimensions of the crankshaft parts;
- 21128 – 16 valves, engine with the maximum volume for this model (1.8 l). Luxury version from Super-auto JSC.
One of the versions of the VAZ-21123 was produced right up to 2009, but it was already a three-door and was produced in small series. The three-door hatchback had a 16-valve 1.6-liter engine in a luxury version. It was for this model that the term “coupe” was first used as a marketing ploy. But, besides this, this development had a body that was much stiffer and allowed the car to become more responsive on the road.
If you often transport medium-sized cargo, which includes products from your dacha, the VAZ-2112 car model will be the best option for you. The benefits of a large luggage compartment are obvious, and the ergonomic interior with folding rear seats doubles the cargo capacity.
home ⇒ equipment ⇒ luggage racks ⇒ vaz ⇒ vaz luggage racks The width of VAZ 2112 luggage racks for all modifications is . Years of production 1995 – 2008:
- Height: 680 mm;
- Diagonal: 1375 mm;
- Diagonal: 1375 mm.
Trunk of a sedan or sports car
If the VAZ-2112 was initially planned as a sports car, then after shortening the rear overhang, raising the contours and installing a 16-valve engine instead of an 8-valve one, a practical copy of the sedan was obtained.
Agree, this is not the first time that VAZ plans one thing, but creates something completely distant from what was planned.
The VAZ-2112 cannot be called a full-fledged sedan due to the fact that the size of the luggage compartment is 50 liters smaller than that of a family car.
The average sedan has a trunk volume of 450 liters, and the VAZ-2112 has 400 liters. But the advantage of this model is the large opening, which allows you to load bulky items. Among the models of its brothers 2110 and 2111, the station wagon is considered the leader in luggage compartment capacity.
Characteristics of the luggage compartment of the VAZ-2112:
- What are the dimensions of the trunk on a VAZ-2112 in centimeters: photo of the luggage compartment
- length – 925 mm;
- length including folded seats – 1483 mm;
- tailgate height – 516 mm;
- tailgate height – 982 mm;
- opening width – 900/930 mm;
Why does the VAZ-2112 stove fan not work?
Mounting methods
Dimensions of the Lada Granta liftback (body dimensions, trunk dimensions)
Understanding the name of the roof rack on a car of one type or another, you understand what you want to equip your vehicle with.
But don't rush into buying. You also need to make sure that the chosen design will fit your car and the existing mounts. If they are provided.
Car racks differ from each other in the method of fastening. And here there are options.
Gutters
Until relatively recently, it was possible to install a roof rack on a domestic car only on the gutters.
These are special recesses that are located along doorways. They are needed to drain water from the roof during rain or snow. Drains are present on many domestic cars. But on foreign cars they are becoming less and less common.
The advantage is that the structure can be installed on the gutters in any position, since there are recesses along the entire length of the roof.
But this option is only suitable for our cars or some old foreign cars. Therefore, this option is rarely considered.
Doorway
Another popular type of fastening involves the use of a doorway. For this, special clamps are used.
A system of metal fastenings is used, which consists of adapters/kits. She clings to the edge in the doorway. Supports are placed on the adapters, and stability is ensured by the tightening mechanism and the rubber base of the trunk.
On some cars there are factory holes for mounting bolts in the door opening itself.
This design is suitable for almost all cars. It is dismountable, which allows you to remove it from your old car and install it on a new car. At most you will have to buy a new adapter.
But aesthetically this is not the most attractive fixation option. Plus, abrasions form at the point of contact over time.
Regular places
Many cars come from the factory with the ability to attach a roof rack. And there are special plugs for this. By removing them, the driver gains access to the fixation system.
Installation is simple. But for this you need to meet several conditions.
To begin with, only model racks are suitable for standard mounts. That is, those that are designed specifically for a specific car. Plus, you won’t be able to change the position of the structure.
Longitudinal arcs
If longitudinal arches are installed on the vehicle, special crossbars are mounted on the roof during cargo transportation.
The distance between them can be chosen, which is convenient when transporting cargo of different types and characteristics.
The advantage is that the system will not come into contact with the roof, and therefore the likelihood of damaging or scratching it is minimal. Additionally, you can tighten the load using straps.
A pressing question is what the arches on the roof of a car are called. I answer. These arches are called roof rails.
The downside of the system is the high center of gravity. An alternative could be integrated roof rails.
Integrated roof rails
They are fused and have no clearance with the roof.
Such units have recently begun to appear on cars. And on crossovers or station wagons.
The roof rails have holes on the inside. With their help, transverse car luggage bars are attached. But there are also cars where you can install universal types of arches that do not have fastening screws.
The center of gravity here is naturally lower than the previous option. Plus, the arches move freely along the rails if there are no mounting screws.
But it is difficult to select crossbars for such roof rails. And there will no longer be such an option as tightening with belts.
T-profile
If there is a T-shaped profile on the roof, the motorist has the opportunity to install a car rack on it. It is positioned as the best fixation option. The profile is also called rails or runners.
Quick installation and no contact between the roof rack and the roof.
The downside is that this profile is found on few cars. Plus, it looks beautiful only on SUVs, crossovers and off-road station wagons. Putting it on sedans or hatchbacks is not the best solution.
Magnets
The option is universal, although it is rightly ignored.
The idea is to place magnets on the roof and use them to secure the trunk. Multifunctional mount and easy to install.
But you shouldn’t count on a large carrying capacity. Suitable for light loads only.
Gradually the magnets become demagnetized. And if this happens while driving, the consequences may be unpredictable. At a minimum, all the contents on the roof will end up on the road.
There are plenty of ways to secure cargo on the roof. But choose a reliable and safe one.
What is the trunk volume on a VAZ-2110
What is the trunk of a VAZ-2110 car?
So, this is a very limited space located in the rear part of the car body, which is allocated for certain purposes, such as transporting goods, a spare tire, driver's spare parts, personal belongings and items of the vehicle owner. This place is covered on top with a trunk lid, which is an all-metal body element. There is also a special spring, the purpose of which is to protect the product from various deformations and compensate for shock actions during closing. The locking device in this part of the car is a lock, which can be either mechanical or automatic. It is worth emphasizing that in the “top ten” the electric trunk drive can be installed as a standard lock. In this case, the trunk button will be considered the opening element. ,
How does a car trunk lock work?
The operating principle is described below:
- The current is transferred to the switch on the dashboard on the left side of the mounting block fuse.
- During switching to the operating mode, the impulse is supplied directly to the gearmotor, which, by means of a rod, moves the locking lever of the luggage lock.
- As a result of the above actions, the lock opens.
Detailed description of the luggage compartment of the VAZ-2110
As for the standard luggage compartment, it is qualitatively finished with a special sealing material, which individually weighs approximately 1 kg and has the following dimensional data: 1570 × 30 × 30 mm.
By the way, there are sometimes situations in which a car owner discovers water in his trunk without knowing the reason for its appearance. It is definitely necessary to check the sealing quality of the gasket.
Taking into account the modification of the “ten”, it can be noted that the trunk volume of this car varies between 430-450 liters, provided that the average trunk measurements look like this: 14500×8600×5000 mm.
It is important that the lighting technology of the trunk, that is, its lighting, is included in the general electrical equipment system of the vehicle. In the VAZ-2110, the trunk lighting is located on the shelf of the product.
It is very interesting that the luggage compartment lid on the “ten” is distinguished by a noticeably enlarged rear part. Thanks to this nuance, the creators of this car had the opportunity to make the rear panel lower than usual. What does this mean in practice? This makes loading/unloading a car much more convenient and comfortable.
The lid lining as a reflective element deserves special attention, which looks very unusual and interesting.
We cannot ignore the fact that the first batches of luggage compartment lids for the VAZ-2110 were equipped with special technological holes provided for the lid spoiler, which was entrusted with a rather important responsibility.
Thus, the spoiler is designed to significantly reduce the vortex flows that are formed during the separation of a stream of air from body elements. Accordingly, this has an effect on reducing the counter resistance of air masses. This kind of overlay not only improves the aerodynamics of the vehicle, but also makes its appearance more stylish.
What is the trunk volume in the VAZ-2110: characteristics
The floor dimensions are the following:
- length of the narrowest point – 45 cm;
- length of the widest point – 55 cm;
- total length – 100 cm;
- maximum width – 152 cm;
- minimum width – 92 cm.
The trunk dimensions are as follows:
- opening width – 92 cm;
- length of the opening part – 46 cm;
- full width of the lid – 103 cm;
- trunk height indicators are 49.5 cm.
The characteristics indicated above will greatly help if you need to transport large cargo or modify the trunk of a VAZ-2110 car. In any case, it will not be superfluous to familiarize yourself with the detailed values of the height/depth/width of the luggage compartment of this car.
Geometric dimensions of openings
| For body 2111 | For body 2112 | For body 21123 |
| A – long diagonal of the rear side window frame – 780 mm | D - long diagonal of the rear side window frame - 710 mm | And – short diagonal of the front doorway – 1000 mm |
| B - short diagonal of the rear side window frame - 370 mm | E - short diagonal of the rear side window frame - 230 mm | K – long diagonal of the front doorway – 1500 mm |
| B – diagonal of the rear door opening – 1280 mm | F - diagonal of the rear door opening - 1320 mm | M - short diagonal of the rear side window frame - 720 mm |
| D – distance from the middle of the upper beam of the rear door opening to the middle of the lower beam of the opening – 925 mm | Z - distance from the middle of the upper beam of the rear door opening to the middle of the lower beam of the opening - 1050 mm | H - long diagonal of the rear side window frame - 1040 mm |
Body geometry dimensions of VAZ 2110 and 2112
Roof rack arrangement for VAZ 2111
Hyundai Solaris sedan trunk dimensions
The VAZ 2111 roof rack is installed in two cases:
- when transporting oversized cargo that does not fit even in the very capacious interior of a station wagon;
- with a banal lack of space in the trunk.
Oversized cargo, such as a bicycle, requires fastening of a special design that ensures reliable fixation of the transported object. Skis can be simply secured with standard rubber bands with hooks at the ends, which can be purchased at a car store. But, say, securing a fishing boat or a refrigerator so that it can be transported safely and without damaging the car is a whole art.
Use caution when driving with oversized cargo on the roof. It has significant windage, and controllability parameters change unpredictably
If you systematically do not have enough space inside the body, consider purchasing a soft or hard roof box. A soft car box is simpler; when folded, it can be stored at home, but it gets dirty easily and is difficult to clean, does not have a lock, and spoils aerodynamics. A hard box looks more aesthetically pleasing, is easier to clean, and can be locked, but it is more difficult to load and difficult to store at home.
Exact trunk dimensions
The length of the trunk is 925-1482. This spread is due to the back, it is at an angle. The height of the trunk is 515 mm.
The following two tabs change content below.
It’s difficult to understand, based only on the size of the trunk, whether the thing will fit in or not. I would advise you to purchase a roof rack, maybe the simplest one, for example, an ant. Much more can be translated on the roof. But remember that it is autumn now (at the time of writing the answer) and you may get caught in the rain.
Modifications of VAZ-2110
Varieties of the 2110 are precisely the VAZ-2111, 2112. All of these cars have 4-cylinder, 8- and 16-valve engines. The volume of one gasoline tank is 1.5-1.6 liters. In the early 90s, cars were produced with a carburetor power system, but in the early 2000s they began to integrate fuel injection, which differs in distribution capacity, it is called an injector. The drive became front-wheel drive.
Regarding the body, there are 3 different types:
- VAZ-2110 is made in the form of a sedan;
- body 2111 is called a station wagon;
- 2112 is called a hatchback.
The difference in the 2110 modifications is significant - different bodies and engines. Everything else is very similar, so the craftsmen adjust some parts to each other if desired. The production of 2110 stopped back in 2007, but this does not prevent the produced cars from traveling around the country and beyond.
Drivers note the following advantages of the VAZ-2111:
- machine reliability;
- simplicity of design, conciseness and lack of pretentiousness;
- low cost of domestic cars.
Thanks to these characteristics, the VAZ-2111 has become a real legend. But you can only dream about the luxury of the interior - everything is simple here, just like outside, if we talk about more space in the back, then you should choose 21099.
In Russia, winters are characterized by severe frost and temperature instability; many cars take a long time to warm up before setting off, which cannot be said about the VAZ-2111. The designers made sure that even at minus 25 degrees the car would start almost immediately, even if it had been parked for several days without moving.
Read more: Bipod steering shaft ZIL 130
What you need to pay attention to is the timely filling of oil, and the oily solution should correspond to the season. Chassis is also an excellent option for Russian roads
The luggage compartment capacity is 380 liters.
Engine modifications
In total, there are 6 engine modifications for the VAZ 2112:
- 21120 – the basic version of the 1.5 liter internal combustion engine. The disadvantage is the presence of free space inside the cylinder head and the block itself.
- 21124 – increased power (up to 89 hp) and increased engine capacity (up to 1.6 liters).
- 21126 – power increased to 98 hp. with an engine capacity of 1.6 liters.
- 21127 – the volume is still 1.6 liters, but the power is increased to 106 hp.
- 21128 – power is 105 horses, which is achieved by increasing the volume of the combustion chamber (1.8 liters). The problem with the valves bending has been resolved.
- 21129 – the engine has a volume of 1.8 liters, a phase shifter has been added.
Body parts
The VAZ 2112 is popular among novice motorists. This is precisely what can explain certain shortcomings and deformations that appear on the car body elements over time. A novice driver is usually inexperienced and makes certain mistakes that lead to accidents or breakdowns.
Car wings are no less susceptible to deformation. These parts themselves are not very strong, and if they collide in a serious accident, they are severely deformed. Less serious damage can be corrected, according to the dimensions given by the standard geometry of the VAZ 2112 body. Complex deformations cannot be restored, and it is easier to replace.
And, of course, corrosion eats up a lot of parts of the VAZ 2112 if the owner does not take sufficient care of the vehicle. The hood, doors and those parts of the body that are either hidden from view or located close to the road surface are most often exposed to the negative effects of rye.
Specifications
Visibility
Visibility in the cabin is good, everything is perfectly visible from the driver's seat, the glass area is large. However, the rear view is partially blocked by the spoiler.
Body
The bodies of all Lada cars leave much to be desired. They are made of thin and very low quality metal that rusts instantly. The sills, arches and lower parts of doors are most susceptible to corrosion. If you find a VAZ 2112 in good condition, then both the arches and the sills will probably be overcooked.
How to install
To attach the trunk to a VAZ 2110 car, it is not necessary to visit a car service center. You can install the roof rack yourself. Procedure:
We install supports for further installation of transverse arches
It is important to check that the support fits onto the seal. Otherwise, there is a risk of damaging the car's paintwork. Pull out the control knob
Carefully holding the support, turn the adjuster until the structure fits tightly to the machine. Do not overdo it so as not to deform the beam. We repeat this procedure with another support. We check the geometry: it is necessary to secure the supports evenly. We monitor whether they lie tightly. We install the cross members and check the geometry again. We fix the box, mesh or other structure.
Fastening to gutters
Installing a roof rack on a VAZ 2110 using mounts for gutters is the most common type of fastener, typical mainly for domestic cars. Advantages:
- many options for trunk position,
- possibility of installing several pairs of rack racks,
- the presence of a special type of luggage installations - baskets,
- versatility - suitable for almost all cars of the VAZ family.
Fastening to the doorway
Unlike the previous one, this mounting option is typical for foreign cars. But the installation of a trunk on a VAZ 2110 often occurs due to clamps behind the doorway.
The car trunk is secured thanks to profiled side bends. Fasteners are placed there, and the required level of structural stability is achieved due to the tightening device at the base of the trunk itself.
The advantages of this fastening system:
- versatility - suitable for most models,
- safety – high protection against removal.
Installation of roof rails
Most versions of car racks on the roof of a VAZ 2110 or 2112 can be installed without the use of roof rails. This design itself can play the role of a kind of trunk. Therefore, consider installing it. Before you take action, keep two things in mind:
- it makes sense to install roof rails only if they are permanently on the roof of the car,
- It is recommended to entrust the installation work to professionals.
If it is not possible to entrust the installation of roof rails to specialists, you can follow the instructions:
Preparation: thoroughly clean the roof from dirt, degrease the surface of the body, remove the ceiling trim in the cabin. Drilling holes in the body
It is important to clearly calculate the mounting locations for the roof rails. We prepare the reinforcing plates. Any metal will do, thickness – 2 mm
We bend the plates to the shape of the tens of ceilings and fasten them with glue. We install roof rails.
When installing, take into account:
The first load can be transported on the roof rails within 24 hours from the moment of installation; regularly check how tightly the roof rails fit to the car body; it is important to evenly distribute the luggage on the installation; do not exceed the load-carrying capacity of the roof rails.
The problem of lack of trunk space in the VAZ 2110 is easily solved. The main thing is to be able to choose a universal car rack, taking into account possible factors - from the purpose and frequency of cargo transportation to the type of fasteners.
Trunk volume of the VAZ-2110 - what are the dimensions?
In this article we will talk about the trunk volume of the VAZ-2110.
So, what exactly is this trunk? This is the space that is located in the body of the car, on the back of it. It is dedicated to carrying cargo, a spare tire for a car, things and various other household items such as a first aid kit. The space is closed on both sides, closes and opens. There is a spring on the trunk that holds it at a height and prevents it from falling into the owner’s hands.
The lock is what locks this trunk and prevents any unauthorized person from opening it. It can be either mechanical or automatic. That is, the trunk can be opened either from the car key manually or by pressing a button on the key or in the car interior. In the VAZ-2110 there is both method of opening. It comes from the factory mechanically, but if desired, the owner can convert it to automatic at the service center.
Description of the trunk
The trunk is treated with material. The material itself, that is, the lining, separately from the trunk weighs approximately 900 grams. Here are its dimensions: 1560 x 29 x 29 millimeters.
Sometimes trunk owners find that when opening, water is flowing from somewhere, or the trim and objects are wet. In this case, you need to check the reasons for the appearance of water there. These could be holes in the body or a poorly lined trunk that allows water to leak through. In this case, you just need to change the gasket or seal holes and gaps in the car body.
The trunk volume of the VAZ-2110 varies greatly, from 420 to 460 liters. The average trunk dimensions are: 14400 x 8500 x 4900 mm.
On the VAZ-2110, the very same trim that reflects light deserves special attention. It comes on the trunk lid, which is very unusual.
Characteristics and dimensions of the trunk of the VAZ-2110
The dimensions of the bottom of the trunk, that is, the floor, are represented by the following indicators:
- The length of the narrow places is approximately fifty centimeters.
- The length of the wide areas is sixty centimeters.
- The total length of the entire trunk of the VAZ-2110 is exactly one hundred and one centimeters.
- Width - one hundred and fifty-one centimeters.
The overall dimensions of the trunk are:
- The width of the opening is ninety-one centimeters.
- The length of the opening is forty-five centimeters.
- The width of the trunk lid is one hundred and two centimeters.
- The height of the trunk is fifty centimeters.
Conclusion
If you need to transport heavy cargo in the trunk of a VAZ-2110 car, you need to know its volume. In any case, if you are the owner of this iron horse, you should familiarize yourself with the trunk volume of the VAZ-2110. We wish you roads without traffic accidents and success in life!
VAZ-2110
Putting the “tenth” family into production line production cost VAZ quite a lot of money and effort. Due to the difficult economic situation, putting the “tenth” on the assembly line took a considerable time, although, according to the designers, the “tenth” model was ready for mass production already in 1992. The decision to put it into production was made twice, but for certain reasons adjustments were made to the design, and the decision had to be postponed. The first “ten”, which was properly processed by conveyor technology, was assembled on June 27, 1995, and the first production cars began to be produced only in 1996. “Ten” was perceived precisely as the first sign of better times. At least the VAZ workers themselves thought so.
Geometric dimensions of openings
| For body 2111 | For body 2112 | For body 21123 |
| A – long diagonal of the rear side window frame – 780 mm | D - long diagonal of the rear side window frame - 710 mm | And – short diagonal of the front doorway – 1000 mm |
| B - short diagonal of the rear side window frame - 370 mm | E - short diagonal of the rear side window frame - 230 mm | K – long diagonal of the front doorway – 1500 mm |
| B – diagonal of the rear door opening – 1280 mm | F - diagonal of the rear door opening - 1320 mm | M - short diagonal of the rear side window frame - 720 mm |
| D – distance from the middle of the upper beam of the rear door opening to the middle of the lower beam of the opening – 925 mm | Z - distance from the middle of the upper beam of the rear door opening to the middle of the lower beam of the opening - 1050 mm | H - long diagonal of the rear side window frame - 1040 mm |
Body parts for VAZ 2112
You can learn more about what the main body dimensions of the VAZ 2112 are from the table above and photo materials. In addition, valuable information about methods for measuring geometric diagonals can be gleaned from other instructions presented on our website.
Trunk volume of the VAZ-2110 - what are the dimensions?
In this article we will talk about the trunk volume of the VAZ-2110.
So, what exactly is this trunk? This is the space that is located in the body of the car, on the back of it. It is dedicated to carrying cargo, a spare tire for a car, things and various other household items such as a first aid kit. The space is closed on both sides, closes and opens. There is a spring on the trunk that holds it at a height and prevents it from falling into the owner’s hands.
The lock is what locks this trunk and prevents any unauthorized person from opening it. It can be either mechanical or automatic. That is, the trunk can be opened either from the car key manually or by pressing a button on the key or in the car interior. In the VAZ-2110 there is both method of opening. It comes from the factory mechanically, but if desired, the owner can convert it to automatic at the service center.
Description of the trunk
You may be interested in: Replacing the Lacetti timing belt: do it yourself
The trunk is treated with material. The material itself, that is, the lining, separately from the trunk weighs approximately 900 grams. Here are its dimensions: 1560 x 29 x 29 millimeters.
Sometimes trunk owners find that when opening, water is flowing from somewhere, or the trim and objects are wet. In this case, you need to check the reasons for the appearance of water there. These could be holes in the body or a poorly lined trunk that allows water to leak through. In this case, you just need to change the gasket or seal holes and gaps in the car body.
The trunk volume of the VAZ-2110 varies greatly, from 420 to 460 liters. The average trunk dimensions are: 14400 x 8500 x 4900 mm.
On the VAZ-2110, the very same trim that reflects light deserves special attention. It comes on the trunk lid, which is very unusual.
Characteristics and dimensions of the trunk of the VAZ-2110
The dimensions of the bottom of the trunk, that is, the floor, are represented by the following indicators:
- The length of the narrow places is approximately fifty centimeters.
- The length of the wide areas is sixty centimeters.
- The total length of the entire trunk of the VAZ-2110 is exactly one hundred and one centimeters.
- Width - one hundred and fifty-one centimeters.
The overall dimensions of the trunk are:
- The width of the opening is ninety-one centimeters.
- The length of the opening is forty-five centimeters.
- The width of the trunk lid is one hundred and two centimeters.
- The height of the trunk is fifty centimeters.
VAZ-2112
Since 1999, VAZ began producing the VAZ-2112 with a hatchback body that was shortened by almost 10 centimeters compared to the station wagon and sedan and a luggage compartment volume of 400 liters. Thanks to the short wheelbase, it was possible to achieve a clearer response of the car to turning the steering wheel. The 2112 has sportier handling, more aggressive ride quality and improved performance. In addition, the “twelfth” is characterized by increased driving comfort. Despite its excellent performance and technical characteristics, model 2112 was discontinued early - already in 2008.
Since 2000, production of a cheaper modification began - VAZ-21122. This model combines all the design features of the 2110, including its “filling”. The rear seat was “borrowed” from 2111. The following modifications were produced: 21120 with a sixteen-valve engine producing 94 hp. With. and a volume of 1500 cubic meters. cm (maximum speed – 185 km/h); 21122 with an eight-valve power unit with distributed fuel injection and version 2112i (injector).
The vehicle configuration options are as follows: 21120 – “norm” (“01”) and “luxury” (“02”); 21122 – “standard” (“00”), “norm” (“01”) and “luxury” (“02”). “Norma” includes front electric windows, central locking, immobilizer, athermal glass and electric trunk lock. In luxury cars, in addition to all of the above, heated front seats, an on-board computer, velor seat upholstery and fog lights are added, and if the car has sixteen valves, then alloy wheels. All cars, regardless of version and configuration, are equipped with a rear wing and a brake light integrated into the spoiler.
In the period from 2003 to 2006, the assembly of one-piece three-door hatchbacks was carried out - VAZ-21123 “Lada 112 Coupe”. Initially, the model had a unique M series bumper, uncharacteristic for the “tenth” family, and was equipped with a powerful sixteen-valve engine with a capacity of 1600 cc. see and had a luxury package. In addition to convenience and compactness, the body of the three-door car, compared to other modifications of the “tenth” family, turned out to be more rigid.
Do you want to buy a new car, but can’t sell your old one? Have you tried everything, but standard methods do not bring any results? Don’t be upset about this, because there is a website that will help you with the urgent purchase of a car.
Repair manual for VAZ 2110, 2112, 2111 (Lada 110)
If the trunk lid has vertical play in the closed position or closes with great force, adjust the height of the lock.
You will need a 10mm socket wrench (head).
1. Loosen the three nuts securing the lock, having first removed the protective casing.
2. Move the lock in the desired direction and tighten the rod securing screw. Check the ease of locking the lock. Repeat the adjustment if necessary. After this, finally tighten the lock nuts.
3. If, when closing the trunk lid, the latch does not fit into the lock latch (a blow is heard and the lid closes with great force), loosen the two fastening bolts and move the latch in the desired direction. Check the ease of locking the lock. Repeat the adjustment if necessary. After this, finally tighten the fastening bolts of the clamp.
Technical characteristics of VAZ-2110/VAZ-2111/VAZ-2112:
| 2110, 21102, 21103, 21104 | 21110, 21111, 21113 | 21120, 21122 | |
| Years of manufacture | 1996-2008 | 1997-2008 | 1999-2008 |
| Dimensions (L x W x H), mm | 4265 x 1680 x 1420 | 4170 x 1676 x 1430 | |
| Wheelbase, mm | 2492 | ||
| Body type | 4-door sedan | 5-door station wagon | hatchback |
| Number and arrangement of cylinders | 4 | 4 | 4 |
| Engine capacity, l | 1.5, 1.5, 1.5, 1.596 | 1,5 | 1,5 |
| Curb weight, k | 1030 | ||
| Total weight, kg | 1505 | ||
| checkpoint | fur. | fur. | fur. |
| Engine power, l. With. , at rpm | 72, 78, 91, 96 | 56 kW, , 69 kW | 94 |
| type of drive | front | front | front |
| Steering type | distributed vpr. | ||
| Supply system | distributed injection | distributed vpr. | disc, ventilated, drum |
| Brake system | disc, ventilated, rear drum | disk, ventilated | |
| Front suspension | independent, spring, McPherson, with stabilizer. | independent, telescopic, with hydraulic shock absorbers, with coil springs | independent, telescopic, with hydraulic shock absorbers, with coil springs |
| Rear suspension | semi-dependent, spring, on trailing arms | ND | ND |
| Maximum speed, km | ND, 170, 185, 185 | 160-165 | 170-185 |
| Acceleration dynamics 0-100 km/h, s | ND, 14, 12.5, 12 | ||
| Fuel consumption per 100 km, l | 7.5 (average) | 7.5 (average) | 9.8 (city) |
How much fuel is needed
This question is especially relevant. When you go to a gas station, you should know how much gasoline can be put into your car, especially if you want to fill a full tank. For example, the trip is long, and a lot of fuel is needed to make it go well.
Each car has its own tank. It differs not only in its design features, but also in its volume. It is basically designed to travel approximately five hundred kilometers. But this is if we talk about gasoline. As for diesel, the values are slightly different. If you fill the tank completely, the distance you can travel is greater.
VAZ-2110
Putting the “tenth” family into production line production cost VAZ quite a lot of money and effort. Due to the difficult economic situation, putting the “tenth” on the assembly line took a considerable time, although, according to the designers, the “tenth” model was ready for mass production already in 1992. The decision to put it into production was made twice, but for certain reasons adjustments were made to the design, and the decision had to be postponed. The first “ten”, which was properly processed by conveyor technology, was assembled on June 27, 1995, and the first production cars began to be produced only in 1996. “Ten” was perceived precisely as the first sign of better times. At least the VAZ workers themselves thought so.
The body, which is a four-door sedan, has received a completely new aerodynamic shape in a modern biodesign style. At least 50% of all car body parts were made of galvanized metal. The modern interior and design of the car, improved technical characteristics and a spacious interior fully met the requirements of the domestic passenger car market. In the “tenth” family there were only 4 body types: four-door sedan (2110); five-door hatchback (2112); a five-door utility station wagon (2111) and a four-door limousine (21109).
Initially, most of the cars were equipped with the already well-known engine of the previous VAZ-21083 model, but it was soon replaced by a new generation of engines that had electronic control and distributed injection of the fuel mixture. The “Ten” was equipped with 3 different engines with a volume of 1500 cc. cm: carburetor (2110) 72 hp; eight-valve injection (21102) with a power of 78 hp. (with a maximum speed of 170 km/h, and acceleration from 0-100 km/h in 14 seconds) and a sixteen-valve injection (21103) with a power of 91 hp. With. (with a maximum speed of 185 km/h and acceleration from 0 to “hundreds” in 12.4 seconds). Externally, 2110 and 21102 are no different. But model 21103 has differences: R14 size wheels, higher size front brakes and stiffer front wheel suspension springs. The more powerful model 21104 has the same characteristics (volume 1600 cc and power 96 hp at 138 Nm). Trunk volume – 430 liters.
Models of the “tenth” family were produced in 3 configuration options: “luxury”, “norm” and “standard”, which were designated “02”, “01” and “00”, respectively. For cars with an eight-valve engine, all 3 versions were provided, but for “sixteen-valve” engines - only “standard” and “luxury”.
Trunk volume of the VAZ-2110 - what are the dimensions?
In this article we will talk about the trunk volume of the VAZ-2110.
So, what exactly is this trunk? This is the space that is located in the body of the car, on the back of it. It is dedicated to carrying cargo, a spare tire for a car, things and various other household items such as a first aid kit. The space is closed on both sides, closes and opens. There is a spring on the trunk that holds it at a height and prevents it from falling into the owner’s hands.
The lock is what locks this trunk and prevents any unauthorized person from opening it. It can be either mechanical or automatic. That is, the trunk can be opened either from the car key manually or by pressing a button on the key or in the car interior. In the VAZ-2110 there is both method of opening. It comes from the factory mechanically, but if desired, the owner can convert it to automatic at the service center.
Description of the trunk
The trunk is treated with material. The material itself, that is, the lining, separately from the trunk weighs approximately 900 grams. Here are its dimensions: 1560 x 29 x 29 millimeters.
Sometimes trunk owners find that when opening, water is flowing from somewhere, or the trim and objects are wet. In this case, you need to check the reasons for the appearance of water there. These could be holes in the body or a poorly lined trunk that allows water to leak through. In this case, you just need to change the gasket or seal holes and gaps in the car body.
The trunk volume of the VAZ-2110 varies greatly, from 420 to 460 liters. The average trunk dimensions are: 14400 x 8500 x 4900 mm.
On the VAZ-2110, the very same trim that reflects light deserves special attention. It comes on the trunk lid, which is very unusual.
Characteristics and dimensions of the trunk of the VAZ-2110
The dimensions of the bottom of the trunk, that is, the floor, are represented by the following indicators:
- The length of the narrow places is approximately fifty centimeters.
- The length of the wide areas is sixty centimeters.
- The total length of the entire trunk of the VAZ-2110 is exactly one hundred and one centimeters.
- Width - one hundred and fifty-one centimeters.
The overall dimensions of the trunk are:
- The width of the opening is ninety-one centimeters.
- The length of the opening is forty-five centimeters.
- The width of the trunk lid is one hundred and two centimeters.
- The height of the trunk is fifty centimeters.
Conclusion
If you need to transport heavy cargo in the trunk of a VAZ-2110 car, you need to know its volume. In any case, if you are the owner of this iron horse, you should familiarize yourself with the trunk volume of the VAZ-2110. We wish you roads without traffic accidents and success in life!
What is the trunk volume of the VAZ-2112 in liters: photos, exact data
Car: VAZ-2112. Asked by: Dmitry. The essence of the question: What is the exact volume of the trunk in liters on a VAZ-2112?
Hi all! I'm interested in the actual volume of the trunk in liters. I want to set up my sound system and calculate all its components. To do this you need to know the exact volume!
I want to place a sub in the trunk, plus an amplifier, so that there is a cool acoustic setup. I’ve already bought plywood and have a jigsaw. Can you tell me?
The exact volume of the trunk of the VAZ-2112 according to passport data
I'm just sick of cars. I try to study in detail every car I have owned. I enjoy driving at night on city streets. I try to do my own repairs on my cars!
Here is a photo of the luggage compartment of the editorial car. This is an 8-valve VAZ-2112, 2003.
Luggage compartment of an editorial car
Replacing the trunk lid lock of VAZ-2111 and 2112
Trunk lock VAZ 2110, 2111, 2112 (ten)
☰
VAZ 2110, 2111, 2112
repair manual
☰
Note: lock replacement, adjustment, cylinder replacement on model 2110 is listed here. Tailgate lock
| 1 – gear motor for the electric drive of the lock; 2 – gear motor bracket; 3 – gasket; 4 – lock drive; 5 – bracket; 6 – upper links; 7 – bracket for the lock drive lever of the VAZ-2112 car; 8 – nut; | 9 – lever of the lock drive of the VAZ-2111 car; 10 – lower links; 11 – electric drive thrust; 12 – lock; 13 – lock socket; 14 – nut securing the retainer socket; 15 – lock retainer; 16 – bolt; 17 – lock fastening nut |
| 4. Unscrew the self-tapping screws around the perimeter of the rear wheel arch trims and sidewalls and remove the trims. |
| 5. Disconnect the connectors of the right and left branches of the tailgate wiring harness from the connectors of the rear wiring harness near the rear wheel arches. |
| 6. Disconnect the tube from the rear window washer nozzle. |
| 2. Open the door all the way up, unscrew the stop pins 6 (Figure Removing the tailgate of a VAZ-2111 car) from the threaded holes and remove the stops. In this case, an assistant must support the door. |
| 2. Holding the door, unscrew bolts 1 securing the fixed part of the hinge to the body and remove the door |
| 9. If necessary, use a screwdriver to press out the twelve plastic holders and remove the tailgate trim. |
| 10. Install the door in reverse order. Before installing the door trim, check the condition of the plastic holders and, if necessary, replace them with new ones. |
Body and its parts Malfunctions and defects of the body Geometry and body sections Removing the front bumper Removing the rear bumper Removing the radiator trim Removing the front fender liner Removing the front fender Replacing the hood gas stops Removing the hood Replacement and adjustment of the hood lock Replacing the hood lock cable Removing the air intake grille Removing the trunk lid Replacing the lock trunk lids Trunk lid lock 2111 and 2112 Removing the door trim (front, rear) Replacing the door glass Replacing the window lifter mechanism Removing the outer door handles Removing the inner door handle Replacing the front door lock Replacing the door lock cylinder Replacing the rear door lock Removing the doors Removing the front seats Removing the rear seat for 2111 and 2112 Removing the central lining of the tunnel Replacing the front seat belts Replacing the rear seat belts Replacing the outside mirror Removing the inside mirror Removing the dashboard Disassembling the dashboard Replacing the heater radiator Removing the heater (stove) Painting the body Anticorrosive, anti-noise, body sealing Body polishing
Dimensions of VAZ 2111 station wagon: dimensions
Buyers of the VAZ-2111, as a rule, are people who quite often have to transport various cargoes. Accordingly, the first place here comes to such points as carrying capacity and luggage compartment capacity. However, sometimes potential buyers are interested in all the dimensions of the VAZ-2111 - a station wagon.
Some of the modifications of the “eleventh” differ in their sizes
Naturally, the VAZ-211 is considered by potential buyers as a passenger truck. The station wagon body allows you to “take on board”, including bulky cargo, which is simply impossible to stuff into a sedan, and can hardly be placed in a hatchback. However, sometimes potential buyers are interested in all the dimensions of the car - size can matter, for example, if you have a non-standard garage. So, let's look at the main characteristics of the “eleventh”. In particular:
- length - for almost all modifications it is 4,285 millimeters. The only exception here is the VAZ-2111 “Tarzan” with 1.7 and 1.8 liter engines. They are slightly shorter - 4,255 millimeters;
- the total width, including mirrors, is 1,680 millimeters for almost all modifications. "Tarzans" is also different here. They are slightly wider than the others - 1,710 millimeters;
- height – the situation is exactly the same here. For almost all modifications this parameter is 1,480 millimeters. “Tarzans” stands out here too. They are taller - 1,610 millimeters.
Trunk of VAZ-2111
However, the main parameter of the “eleventh”, which is why car enthusiasts generally choose it, is, of course, its carrying capacity. Here the VAZ-2111 has practically no equal among the products of the domestic automobile industry. In this case, Largus should be taken out of the equation, since, firstly, it is a foreign car produced in Togliatti, and secondly, it is a slightly different class of car.
In the standard version, the volume of the luggage compartment of the “eleventh” is 380 liters. However, these are not all parameters.
For example, when loading a car to the ceiling, we already get 575 liters. And finally, the most spacious option. We are talking about the folded rear seat. Here we already get a fairly solid result - 1,215 liters. At the same time, you can load 500 kilograms for transporting cargo.
The trunk lock is broken - what to do?
Such situations, unfortunately, are not so rare. It is impossible to give universal recommendations in one article; the structural design of locks varies too much depending on the manufacturer and model. We will not consider problems with old domestic cars; there, if the trunk lock is broken, the problem can be solved with a screwdriver or a metal ruler. You should not stop at models that have access to the luggage compartment from the car interior - the seats and partitions are removed - access to the lock is provided, you can open the trunk lid without any harm to the appearance of the body. The procedure depends on the specific device. It’s worth talking about how to open the trunk lock of a BMW E39 - a rather capricious model from this point of view.
Model features
Service station specialists who diagnose cars of different brands claim, not without reason, that motorists receive the most complaints about this particular model. It is immediately necessary to note that you should not believe all the advice that you can find on the Internet; some of them can be classified as barbaric. For example, certain “experts” advise opening the trunk lid a little using your favorite domestic tool - a pry bar or crowbar. The advice is essentially effective; in this way you can gain access to the lock and open the lid.
The only question is at what price the result will be obtained and how much money you will have to spend on subsequent body repairs, so think carefully, especially if you are planning to buy a used car. And it will definitely have to be repaired. Therefore, this option will not be considered; let’s talk about a more “humane”, but also more complex method. To do this you will need a drill, drills Ø4.2 and 10.2 mm, a tape measure (ruler), a pencil, a tap and an ordinary screwdriver. So, what to do if the trunk lock of this particular model is broken?
Remove the rear license plate. It is located under the handle and blocks free access to the trunk opening/closing mechanism. You will have to drill holes in this place; after the repair work is completed and the number is installed, the “location” will remain invisible. Mark the locations for the holes. All problems arise due to the fact that the trunk lock is broken and the drive does not work, and they are located exactly in the center of the recess for the license plate. And you need to drill a hole at a distance of 3 centimeters from the fold of the landing cradle. Drill holes. Everything is simple here - you need to make a recess with a tap and drill. You should use a smaller diameter drill first, and then use a larger one.
Keep in mind that you need to drill through two sheets of metal. You need to drill carefully, without fanaticism. It is better to choose high drill speeds - less damage to the paint and varnish coating of the metal
If you have marked it accurately, then upon careful examination a metal strip will be visible through the hole. This bar is connected to the mechanism rod; you need to move it slightly to the left with a screwdriver and the trunk lid will open. If you made a mistake in the markings, you will have to use the first hole as a “target” hole and drill the second.
We hope that now you know how to open the trunk lock in the most difficult case; all other car models will not present any difficulties.
And one last thing. If your car is stored in a garage, you don't have to seal the holes. In all other cases, the integrity of the metal will have to be restored. This is done not only to prevent corrosion processes, but also to ensure the safety of the car. Experienced car thieves know all the ways to open the trunk; you don’t need to “simplify” their work with your own hands.
