✅ DIY gazelle bar drawings - avtoarsenal54.ru

Assembly and installation of the armrest in the Gazelle

Armrests are the interior of the car and the comfort of the driver. The product is individual and unique. It all depends on how developed the master’s imagination is. Often this production is standard - factory-made, which is not very original. The gazelle armrest is made by the drivers themselves from various materials. Since this interior detail is small in size, you can put all your ideas into it.

This is what the armrest looks like in the Gazelle's cabin

This is what the armrest looks like in a Gas 24 car

Video on installing an armrest in a Gazelle Business car year of manufacture:

For convenience on long journeys and better practicality, we suggest you modify the interior of your Gazelle car. In order to make a bar, you need to find old furniture such as a wardrobe, cabinet, chest of drawers. You will also need furniture screws and glue for gluing the seams. Externally, the bar and armrest can be covered with carpet or leatherette. Using the drawing, make patterns from cardboard, glue them together with tape and try them on in the car.

Do-it-yourself armrest assembly

Every owner of a car, even a Soviet-made one, wants to highlight his “beauty”. Some people make a car into a supercar based on its external appearance, while others focus on its internal design. Wanting to ride easily and comfortably. Car enthusiasts, whose car is not only a luxury item, but also a workhorse, spend most of their time behind the wheel of a car.

Armrest design option in the Gazelle cabin

Sketch with armrest dimensions

What do you need

In order to start producing this masterpiece, you need:

Measurement data for the location where the armrest will be located. Height, width, depth and so on.

Drawing with dimensions of the armrest for a gazelle

The process of cutting a template from paper

An example of the location of the handbrake in the cabin

Required materials and installation process

To work, you need a saw or jigsaw, as well as wood of small thickness. It could even be chipboard or a varnished piece from old furniture. On this wooden sheet you need to draw a drawing and carefully cut it out.

Armrest parts cut from plywood

Assembled plywood armrest structure

Plywood armrest design option

Example of a finished armrest frame

Sheathing

The material must be chosen to match the tone of the car interior. You can cover the gazelle armrests with your own hands with leatherette. This will be relevant.

The color of the fabric will look rich and beautiful if you combine gray and black tones. Sheathing is a very simple task that takes up to 40 minutes.

Example of armrest trim for Gazelle

Installing the cover

This detail requires special time. In order for the armrest not to be rigid, foam rubber must be placed on top of the lid. If you don't have solid foam, you can use a sponge.

To prevent the foam rubber from shrinking and crumpling under the casing, glue is applied to the base of the cover. Then sponges or foam rubber are placed on the glue. Let the glue dry. After this, you need to sew individual sponges or stitch foam. Excess is removed with scissors. Afterwards, felt material is placed on top and padded on all sides.

Example of a finished armrest cover

Hinges and magnet

To prevent the lid from “moving” back and forth when the driver places his hand, and to prevent it from opening, a magnet is required. After installing the magnet, you need to install the hinges with self-tapping screws. Having chosen the location for installing the cover, it is finally screwed to the armrest itself.

Mounted hinges on the gazelle armrest

DIY mobile home

Before building a motor home, you need to study a whole list of descriptions of typical mistakes that are often made.

Discard scrap materials that you have lying around in the garage or at the dacha. You'll be spending a lot of time in a mobile home, so you need to prioritize comfort.
If you make a mobile home from a van like a GAZelle, then do not install a dry closet. Yes, this will cause a little discomfort, but you will have a free corner for the necessary things. Moreover, the GAZelle car is not very big, so you cannot create normal insulation between the toilet and the interior.
For this type of transport, you need to redo and modify the body, heating system and wiring. If you are weak in this knowledge, then it is better to contact a mechanic.
Make a preliminary layout of the future salon, otherwise you may make a mistake in the calculations and the furniture will not fit.
Design and install a small tank for drainage.
Install a connector for 220 V and a 12 volt converter from the battery.

Converting a GAZelle into a mobile home

We've sorted out the recommendations, now you can move on to a step-by-step master class on how to make a mobile home with your own hands.

Let's start with dismantling. The interior should be completely empty, and all metal products should be exposed with 3 in 1 paint. When everything is dry, it is necessary to insulate the ceiling and walls. Plywood and PPE fabric (thermal insulation) will be used. Just remember that all wires must pass under the casing.

Now we make a frame for furniture from an ordinary profile pipe. All work is carried out directly inside the machine. After welding all the products, we transfer the finished frame to the garage, clean it, process it and bring it back into the car.

We begin to finish the upper level for the mezzanine, and then cover everything with carpet.

To make a complete imitation of a motor home, you can use the front hub from a VAZ and an element from a rotating rack. This way the front seats will rotate 180 degrees.

Next, we move on to interior decoration, namely: installing furniture on a prepared frame, connecting lamps, installing plumbing fixtures and decorating other parts. Instead of a hob, you can buy a small travel gas burner.

You can also safely use ordinary kitchen peripherals instead of cabinet furniture. But in this option, everything needs to be firmly fixed.

With these small steps you can make a mobile home with your own hands. Yes, the process will take a lot of time, but it's worth it. If you like the idea, then you can watch the step-by-step instructions on how to make a camping trailer out of wood. And here is an idea for the construction of a wooden house on wheels, using the chassis of an old van as the base.

Installation

Installing your own armrest in the Gazelle is not difficult. You can simply install an armrest between the seats, but while driving it can move out of its place and cause considerable discomfort while driving. Therefore, it needs to be installed stably.

Mounted armrest for Gazelle

A polypropylene tube in which the inner side will be steel;
Hairpin M 8 100-110 cm;
Drill.

Drill three holes. Insert slightly trimmed pins into them. A metal plate is placed and everything is secured. Cut a rectangle from plywood that will form the basis of the armrest. Tubes are installed into this plywood, and holes are made in the armrest itself at these places so that the pipes can go there. At this point, the process of assembling and installing the armrest can be considered complete.

DOMOSTROYPlumbing and construction

Thursday, December 12, 2021 1:02
Author: Sereg985
Comment

Category: Construction
Link to post
https://firmmy.ru/

This is what the armrest looks like in the Gazelle's cabin

This is what the armrest looks like in a Gas 24 car

Do-it-yourself armrest assembly

Armrest design option in the Gazelle cabin

Sketch with armrest dimensions

What do you need

In order to start producing this masterpiece, you need:

Measurement data for the location where the armrest will be located. Height, width, depth and so on.

Drawing with dimensions of the armrest for a gazelle

The process of cutting a template from paper

An example of the location of the handbrake in the cabin

Required materials and installation process

Armrest parts cut from plywood

Assembled plywood armrest structure

Plywood armrest design option

Example of a finished armrest frame

Sheathing

The material must be chosen to match the tone of the car interior. You can cover the gazelle armrests with your own hands with leatherette. This will be relevant.

The color of the fabric will look rich and beautiful if you combine gray and black tones. Sheathing is a very simple task that takes up to 40 minutes.

Example of armrest trim for Gazelle

Installing the cover

This detail requires special time. In order for the armrest not to be rigid, foam rubber must be placed on top of the lid. If you don't have solid foam, you can use a sponge.

Example of a finished armrest cover

Hinges and magnet

Features of mobile homes

A motorhome has many advantages, but the most important ones are comfort and mobility. A noisy city with dense traffic and bustle can get so boring and because of this you want to escape into nature. This is where a mobile home comes to the rescue, because you can park it anywhere and not have to think about where to find a hotel nearby. To begin with, we suggest you find out how mobile homes differ and what types there are.

Types - vans, trailers or combined with a car.
Classes - A, B, C.
Types of trailers - hybrid, trailer and fifth-wheel trailers.

With trailers everything is very simple, but with other options it will be a little more complicated, since they look the same, but in reality they are different. Let's try to figure this out.

Van option. The rest room is located inside the cabin and is located separately from the driver's seat. Basically, this format is chosen if only 2 people will travel in such a car. The passenger and driver are in the cabin during the trip, and to get into the living quarters, you need to stop and get out of the car. This type can fit a lot of furniture.

Combined motorhome. In this version, there is access from the sleeping place to the driver's seat. A motorhome in this role is popular for traveling with the family. This is how a combined house can be made from any van.

We briefly got acquainted with popular types, let's move on to the DIY section.

DIY bar armrest for Gazelle dimensions

What you will need for work: a jigsaw, self-tapping screws, a screwdriver and saw blades for it, a thick sheet of plywood (with a reserve). Printer or pattern, ruler, pencil, PVA glue, furniture stapler.

Beginning of work.
Take a sheet of paper and make a pattern.
Apply it to a sheet of plywood and transfer it to the plywood, assemble the structure, cut out Alcantara or fur with a margin to bend along the edges.
Apply glue, let dry, apply a stapler,
Reassemble. Before screwing in the screws, use a thin drill to mark holes so that the plywood does not burst.
Assemble the structure in the cabin.

Tuning a Gazelle involves not only changing the driving performance, but also transforming (tuning) the appearance of the Gazelle. Tuning can turn a Gazelle into an Audi or Mercedes, or at least add recognizable features to these cars. To do this, replace body kit spare parts (grilles, hoods, bumpers, lights) with tuning ones. Even Gazelle next tuning can decorate and add some convenience inside the cabin. Below you can find tuning parts for the Gazelle: covers, armrests, steering wheels, upper shelves, consoles, floor mats, including for the Gazelle NEXT. Often the driver spends most of his life in the car. While waiting for loading or unloading or in traffic jams, the Gazelle driver may get tired. Rugs, armrests, decorative panels, interior curtains, and lambrequins will help create comfort in the car interior. In addition to beauty, decorative details will provide convenience, for example, lambrequins will protect you from the sun, armrests and consoles will conveniently place small items in your pockets and make the journey less tiring.

Accessories for Gazelles not provided by the manufacturer, but produced by various tuning salons, have gained wide popularity among car enthusiasts. In fact, who wouldn't want a comfortable armrest? For those drivers who are forced to spend the night in the car, they simply need curtains that completely cover the windshield from light and the attention of passers-by. It’s not worth even talking about carpets on the floor; they come in pile and rubber. Waterproof rugs, which have earned their popularity, have undeservedly pushed aside pile rugs, but those who start using pile rugs do not refuse them. They absorb moisture and gradually dry out while driving, so the interior is always dry, they are washed in the same way as rubber ones.

Lambrequins on Gazelle are gradually going out of fashion, but they are used quite often; in addition to their decorative function, they can be convenient as sun visors in sunny weather.

Sometimes there is a need to place additional equipment in the car interior, such as a walkie-talkie, tachograph, or additional speakers. Unfortunately, there are not always regular places for such devices, and some of them, in addition to the place, require the ability to seal access to them. To install such devices, some use a floor decorative console, which has a voluminous drawer with a secret bottom. If the dimensions of the device allow, it can be placed in the console, but if not, the most convenient solution is to install an upper shelf; according to their purpose, they are divided into documents, walkie-talkies, and speakers.

Mobile car wash price

Mini-washers from well-known manufacturers, as a rule, are more expensive than others, even if they are inferior in quality. For example, fairly simple devices with a plastic pump from a well-known German company can cost more than Italian ones with a metal one.

Most often, low-quality models can be found in large shopping centers and general hypermarkets. Usually, these are mini-washers from Asian manufacturers - cheap and of poor quality.

It is recommended to purchase devices such as a mobile high-pressure car wash in specialized stores and from authorized dealers.

If you don’t want to tinker with the equipment, then use a dry wash; read more here.

Using these recommendations, you will successfully make your own car wash yourself.

VIDEO - a do-it-yourself version of a mini-wash.

Technical tuning of the Gazelle

Among supporters of the technical improvement of the Gazelle, only a few advocate a radical re-equipment of the car. At the same time, as a rule, there is no talk about remaking the engine - although citizens who have such an opportunity replace the standard GAZ unit with a Japanese-made engine + automatic transmission.

Such an operation is effective, but expensive and complex, and requires the involvement of third-party specialists. We are talking about tuning the Gazelle with our own hands, so we are talking about an even more modest scale. And there is no particular need for physical alteration of Gazelle engines.

But gear shifting needs to be dealt with decisively and irrevocably! The standard manual transmission of the car works flawlessly, but the long lever with its eternal tendency to uncontrollable rattling and a gradual increase in the amplitude of movements should be changed.

Installing a neat joystick is not difficult. Moreover, the cable gear selector has become a standard feature of the latest models of GAZ minibus.

If you are tuning an onboard Gazelle, there is a high probability that you will need to increase the vehicle's carrying capacity. In addition to the mandatory frame reinforcement (see https://www.autodela.ru/main/top/diy/tuning_uaz_3303), it is useful to equip the car with air suspension with electronic level control.

Installing air springs is preferable to reinforcing the springs with additional sheets. Increasing the stiffness of the suspension by increasing the thickness of the springs significantly changes the behavior of the car on the road. An unloaded Gazelle with overly stiff springs begins to “goat” on potholes.

The method of impact-sledgehammer re-pressing of additional spring leaves, common in the practice of amateur tuning of Gazelles, leads to the formation of areas of microscopic cracking of the metal - which ultimately results in damage to the springs at maximum vehicle load. Bending springs without preheating the metal means breaking the product!

An ingenious way to increase the capacity of the body of an old Gazelle is to install an additional rear axle. The third axle is mounted behind the drive wheels, and is a standard rear axle, disconnected from the drive and completely devoid of the gear filling of the gearbox.

The most proactive car owners make the third lifting axle. The most advanced ones connect an additional axle to the cardan transmission - but only if they have an economical diesel engine rumbling under the Gazelle hood. Otherwise, you only have to carry gasoline.

On the Internet you can find materials about installing powerful engines from high-speed passenger cars on Gazelle (fortunately, there are a dime a dozen at dismantling sites for such units). The economic efficiency of such an event is negligible - although purchasing a used motor does allow you to save money.

The operating parameters of high-speed power units are of little applicability to both cargo and passenger Gazelle. The result of forced “hybridization” of a car is usually increased wear of the transmission, excessive fuel consumption, and accelerated carbon formation in the piston group of the engine.

Features and advantages of the site

Our company offers several options for promotional vehicles. The most common is a GAZelle van with advertising printed on the body. The advantage of this advertising medium is the presence of three surfaces, which increases audience coverage. An alternative option is a car billboard, that is, an advertising board installed on the base of a car. It is more noticeable on the streets, but placement of materials is only possible on two sides. Both vans and car billboards vary in size, so you can choose an advertising medium that suits all parameters.

The advantages of advertising on GAZelles are obvious. Their list includes items such as:

Mobility. Stationary advertising banners can become familiar and lose their effectiveness. This will not happen with a brandmobile, because it is constantly moving. At the same time, the busiest points in Moscow are selected for stopping - metro stations, shopping centers, streets with high traffic, etc.
Multifunctionality. A billboard is a universal platform that is suitable for a wide variety of materials. For example, it can be used to increase brand awareness, post information about discounts and promotions, or introduce a new product or service.
Wide coverage. Two or three advertising surfaces, as well as the maneuverability of the brandmobile, ensure coverage of a significant audience. During the day, about 200,000 people will see your information. Moreover, the correct selection of the route and stopping points of the GAZelle guarantees that these will not just be people, but potential consumers of your goods and services.
Efficiency. It does not take much time to produce and apply banners on board the vehicle. If you have a ready-made layout, preparatory work takes only 1 business day. Thanks to this, an effective advertising campaign can be launched in a short time.

You can make other arguments in favor of a brandmobile, but is it worth wasting time on conversations? It is better to contact and personally evaluate the effectiveness of this advertising medium.

They trust us

Tuning the engine cooling system

Which of the “gazelists” is not aware of the problem of summer heat? An engine heated to its operating maximum cannot be turned off: it boils! Moreover: in many cases, natural wear and tear of the engine also entails a decrease in the performance of the cooling system, as a result of which boiling can occur not only when turning off a hot engine, but even when switching from high speeds to idle.

Among the proposed solutions, the engineering service of the Avtodela magazine seems optimal to install an additional temperature sensor in the area of the lower pipe. The fan that ensures air movement through the radiator honeycombs must in this case have an electric drive.

About our company and the advantages of cooperation

"Avtobaner" is a full-cycle advertising company operating in the Moscow market since 2008. Over the past time, we have not only gained vast experience, but also equipped our production with modern equipment for large-format printing. Unlike most agencies that cooperate with subcontractors, we independently produce and place advertising on GAZelles, and therefore maintain optimal prices. By contacting us, you can conduct an advertising campaign with maximum benefit.

However, the affordable cost per month is not the only advantage of our company. In addition, it is worth noting:

Many years of experience. During our work, we have successfully implemented several thousand projects of varying volumes and levels of complexity.
Extensive vehicle park. Having your own vehicles allows you to launch advertising campaigns in the shortest possible time.
Effective control. The price of the package includes monitoring and preparation of a photo report on the placement of the advertising GAZelle.
Comprehensive service. You can order a full range of services - from design development to advertising production and storage of materials upon completion of the advertising campaign.
Productivity. Your product or service will not go unnoticed, because the brand mobile will be located in areas with high traffic.

Need more information about cooperation? We are ready to answer your questions. To get advice or place an order for an advertising campaign, contact our specialists by phone: +7 (495) 15-056-15.

Chip tuning: useful additives to engine productivity

Chip tuning is necessary for a gazelle engine to the same extent as any other internal combustion engine needs it. The main aspects of chip tuning are covered in the article on the page https://www.autodela.ru/main/top/diy/chip_tuning. According to reviews from car owners, Gazelle chip tuning allows you to:

— make the speed increase fast and smooth, without failures or failures;

— eliminate the effect of “floating” speed in all speed ranges;

— increase traction during the acceleration phase.

Don’t expect a noticeable reduction in fuel consumption from Gazelle chip tuning. But you will certainly feel an increase in throttle response and torque!

Tuning the Gazelle's interior

The three of us in the cabin of the on-board Gazelle are frankly a bit cramped. But if you convert the right sofa into a single chair and forget about the second passenger, it will turn out luxurious. The Gazelle's interior is covered in white leather to enhance the feeling of luxury.

The “gentleman’s kit” for tuning the Gazelle’s interior usually includes:

— equipping the doors with electric window lifts;

— replacing the standard heater with a more efficient one;

— installation of ergonomic seats;

— installation of audiovisual equipment;

— production of a ceiling console (or shelf);

— alteration of the dashboard with installation of an on-board computer.

Reconstructing the drive of the sliding windows is simple and does not cause difficulties even for a novice gazelle driver. Heating is being improved in two ways. The first way is to replace the fan and radiator with more efficient devices; the second way is to install (usually under the passenger seat) an additional stove, preferably an autonomous one.

The ceiling console is used to accommodate non-standard electronics, speakers, and lighting fixtures. It has been found out experimentally: using a homemade ceiling shelf for transporting all sorts of small items sooner or later turns into a useful addition to the bomb bay. Don't go wrong with your choice!

Salon

The Gazelle's interior is, to put it mildly, archaic. Only the most undemanding drivers are satisfied with it in its original form. Hard plastic, uncomfortable seats, dull gray color - all this urgently needs to be replaced with more modern and aesthetic analogues.

If you are afraid of the cost of completely replacing the interior, you can purchase individual elements gradually, perhaps combining colors and materials. Start with the main things - the steering wheel, seats, power windows, because these are the ones you have to come into contact with every day. Next, you can install a central console from Gazelle-Business and an armrest with various useful drawers, which will turn it into a mini-office. Music lovers will be able to choose door cards with additional podiums for speakers.

It is also useful to read: How to modernize the appearance of Volkswagen Jetta cars using tuning

There is a wide selection of accessories available for sale for Gazelle salon decor:

door card inserts;
air duct covers;
glove compartment and dashboard, made in wood or chrome, or painted in body color.

For better information content of devices in the dark, you can illuminate them with diodes, and you can also make the interior lighting lamp LED. To complement the image of a non-standard car, airbrushing with film, installing alloy wheels, a hood with air intakes in the STI style (Gazelle has the bad property of boiling even in cold weather) and other pleasant little things that create a unique style will help.

( 2 ratings, average 4 out of 5 )

GAZelle tuning: how not to lose face

The ambitious goals of auto tuning are not an excuse for those who do not improve, but worsen. What not to do? Like this!

You can only move in such a car very slowly and away from other transport. And such a design will not last long - unless a steel plate as thick as an arm is hidden under the bottom of the body.

The desire for stylistic unity of a house, a car and an old wagon left over from a gypsy grandfather can play a cruel joke on the owner of a Gazelle. Bright rags, gold fringe, pennants near the windshield, patterns on the windows. They say that half of India and all of Pakistan travel this way. But where is India and where are we? With such tuning of the Gazelle, you won’t get far in our country, and not only because of the indignation of the traffic police inspectors.

Swivel seats are a great idea! The car doesn't always move, does it? It’s better to communicate face to face while parked! The main thing is the reliability of fixing the seats in the selected position. Otherwise, turns on the road will have to be carried out in two steps: the first is to rotate the steering wheel; the second is to return the chair to its original position.

Flocking of body surfaces is either becoming fashionable or will never go out of fashion. Any fleecy material is an unsurpassed dust accumulator and an inexhaustible source of fibrous deposits, but this is not enough. Flocking is a great way to paint your cabin in eye-catching contrasting colors. No one would want to drive such a car!

Reworking the Gazelle body

The high body of the covered cargo Gazelle is both good and bad. An increase in aerodynamic drag leads to a sharp increase in fuel consumption. A fairing mounted above the cabin can improve streamlining. But only if its size and shape are adequate to the geometric parameters of the car. Errors in choosing the shape of the fairing cannot be compensated for by installing additional headlights.

It's no better if the usefulness of the original idea is drowned in layers of pseudo-improvements. Additional air intakes on the hood and above the hood; visor over the windshield; embossed bumper for Gazelle; the lower side body kit is nothing more than banal excesses.

And even the incredible light tuning of the Gazelle does not improve matters. Such a car is noticeable, looks catchy - especially in the dark - but is not beautiful. And for an impressionable pedestrian, it’s a completely horned messenger of the underworld.

Gazelle is a big car. It would seem that nothing prevents it from being used as an object for artistic experiments of any scale. But it's not that simple.

Enlarged rims, infernally shining disc brakes, a maxi-skirted body kit, a stenciled dragon on the side. Visually, the car crouched and rushed off. But even on the smooth roads of the airfield, you can only drive it in the summer, exclusively in windless, dry weather.

A fur coat suits a car, you’ll agree! We bring to your attention a very feminine tuning of the Gazelle, and even with an emphasis on the ever-fashionable leopard motifs. As they say in medically insurmountable cases - “stylish, sweet, gentle, touching.” And probably not cheap. It’s also profitable if you follow this cat’s Gazelle and take bets from gambling passers-by on the rate of corrosion of fur-covered metal.

A long car rides smoother and has plenty of space inside. But! If you weld (even in a factory setting) two standard Gazelle bodies together, be prepared for the rapid appearance of cracks in the most unexpected places. Yes, and in the expected ones too.

Any box-shaped structure is unstable to torsion, and all artisanal attempts to strengthen and secure the body by welding gussets, ties, reinforcements and other weighting agents are ineffective. But it looks impressive, no doubt!

How to assemble a GAZelle (55 photos + 3 videos)

Today we will visit the assembly line of the Gorky Automobile Plant and see how the most popular commercial vehicle in Russia is assembled.

1. So that viewing the pictures is not too boring, I will try to dilute my photo series with a small excursion into the past and present of GAZ.

2. January of this year marked the 83rd anniversary of the founding of the Gorky Automobile Plant, the largest enterprise in the Russian automotive industry, occupying a leading position in the domestic commercial vehicle market.

3. The car plant was built in 18 months, went into operation on January 1, 1932, and on January 29, the first truck rolled off the assembly line - a GAZ-AA lorry. Since then, the plant has given the country millions of affordable cars, equipped agriculture with trucks, and provided the army with military special equipment, tanks and armored personnel carriers. In October 2011, the 18 millionth car rolled off the GAZ assembly line.

4. Just like 83 years ago, the most popular car in the car plant’s line remains the same, the lorry. The successful combination of carrying capacity and dimensions makes it timeless. All modernizations and improvements do not change the main essence of the GAZelle.

5. And our excursion, as usual, starts from the welding shop. It is here, on the conveyor belt of the welding shop, that you can already view the first outlines of the cabin for the future bestseller of small businesses.

6. A short video excerpt. You can see and hear the rhythm of the welding robots.

7. More than 120 industrial welding robots from the German company KUKA work on the conveyor.