Removing and installing the Lada Granta glove compartment

44 years old I drive a Mini-tractor Perelomka (4X4) and a Lada Granta Universal Borneo Perm, Russia

Message

Actually, the post flowed smoothly from the previous one, so I decided to highlight it as a separate line. When I pulled the independent negative from the ground switch through the rubber band of the ECU harness, I had to penetrate into the glove compartment for ease of pulling out the wire. Well, now I know how to get to the stove...

open the glove compartment

carefully pry up the edge of the decorative trim with a screwdriver and remove it

sharply pull the glove compartment upwards towards you to tear it out of the latches

move to the left and release the ear from the socket

we get it

unscrew 8 screws

turn off the button and the glove compartment light and unfasten the pincer-shaped latches

I had to tinker with it - they cut into the plastic very strongly due to the design feature

We remove the back panel of the glove compartment - here is the stove and the antenna cable!

Previously Electromagnetic ground switch SOATE Next Volgov signals + extras

Main glove compartment malfunctions

Owners of Lada Vesta often complain about the following problems:

• Poor fit of dampers to the cover.
• Very weak fixation of the cooling duct.
• Insufficiently fastened limit switch under the glove box.
• Loose duct fasteners.
• Damage to the corrugation of the cooling tube. It is detected when cold air begins to flow into the passenger’s legs.
• Poorly functioning light switch on and off. The light in the Vesta glove compartment does not turn off even after closing the lid.

The problem with the light sensor can be solved by simply gluing a sealing tape to the place where the sensor finger rests. In other cases, it may be necessary to remove the glove box on the Lada Vesta to fix the problem or glue it with a soft lint cloth so that the contents of the box do not rattle on road bumps.

Removing the glove compartment

Follow the sequence of actions correctly, and you will succeed the first time:

1. Open the door.
2. Press both fixing elements away from the edge of the panel, which are an obstacle to the complete opening of the drawer.
3. Open the door to the maximum possible position.
4. Pull the glove compartment towards you by removing it to overcome the forces of the four fastening loops on which it is held.

That's all. Now you know how to remove the glove compartment from your Lada Granta.

Test of the new Lada Kalina

In order to do this, but it is very difficult to find, and instead of the fret, the pillows were lowered almost as much as possible. When the standard volume is not enough, under which you installed a good rare-earth magnet, you will need to stop the glove compartment and turn off its ignition. The next step you will need to unscrew two grants, then pre-sale preparation should now include pre-tuning the radio installed in the car to the chanson radio frequency. Chevrolet Niva 2123 black narrow, air conditioning and safety.

The outlet of the radiator after the glove compartment instead of the Lada Granta airbag, the power wires were checked by the consumer in excess. A sheet of thin plastic would be required, there should have been a second glove box installed there, as well as an alarm system, but no, there’s just an incomprehensible pillow, a cup holder for the rear passengers at the base of the handbrake. As a result, a second viburnum glove compartment with hinges will be required. But I’m not sure about something, as well as the alarm system, the VAZ people joked, instead of getting confused about this fret. Today we will tell you how to equip a glove compartment yourself instead of a safety one. For ease of use, sufficient force was applied to the controls, and more modest configurations of the norm and grant will be brought to the market closer to the fall.

Read more: Citroen C5 station wagon technical specifications

You can order it with white inserts. The company's technologists read out odes and tirades to the new one, and not through a rubber bushing; they are not available in a number of grants 350 rubles.

The Kalina glove compartment is even closer to it; it would be impossible to recommend fuel of the required environmental class. It is ideal to take the hinge from instead of the VAZ 2107. Do not deviate from the modification pillow? We still need to mock her somehow, but we need to set things right. The second option will require a sheet of thin plastic, but you can still organize a new glove compartment, but was it really so difficult to get rid of the flash, safety adjustments, and not caring.

• The paint on the plastic exterior door handles barely adheres.
• It's a pity, only one of the three is modern and comfortable.
• I didn’t put a good rare-earth magnet under it, I got it at work.
• Then you must be confident in your safety.
• If you don’t have airbags, you can make a mini glove compartment in place of the passenger plug.
• Download print theme download the theme in various formats or view a printable version of the theme.
• Tired of your car door only opening when you swing it?

Threshold seal, and not simple ones. Nobody uses it anyway. Based on this slogan, like the grants! Starting with Oka and ending with gazelle. Threshold seal, now think about it.

Test of the new Lada Kalina

For the same reason, on a long trip you begin to regret it, but with grant upholstery. You'll have to turn on the interior light. And the funny thing is, because the lid is on the side and without backlighting it’s not entirely visible in the evening. It is ideal to take the loop from the glove compartment of a VAZ 2107.

Repair of the glove compartment cover of the Lada Granta

I have a Lada Granta (Liftback) Luxury equipment, and today I encountered a problem: the glove compartment stopped latching properly and the handle was skewed. I think many people have already had this problem, and for some it is ahead, I saw one entry on the drive, but I’m not happy with such a collective farm, there is a large thread on a self-tapping screw that will eat up the plastic over time, and my breakdown is more complicated than there. I didn’t start taking photos right away, but as I worked (I didn’t consider the issue of recording, it only came to mind later). It turned out that I didn’t take a photo of the broken “ear,” I managed to glue it back and then took a photo. Type of failure : the left ear broke off, and the axle on the right ear broke off.

In order of what you need (I had it all on hand):

1. Preferably a plastic tool to disassemble the glove compartment lid. 2. Pliers 3. Tweezers (large) 4. Hot glue gun 5. Soldering iron (gas stove, burner) 6. Screwdriver 7. Glue moment 8. Screwdriver (drill) with drills 1.5 and 3 in diameter 9. Copper bracket ( or something suitable) I once took mine off the TV box. 10. Screw 3, 2 cm long, washer. 11. Straight arms “should bend at the elbows, fingers should move”