It doesn’t matter whether you purchased a new car at a dealership or bought a used one at https://carro.ru/best-moscow-autosalon/, over time, any equipment requires repair and maintenance. Drops of moisture appearing inside the car on the windshield can indicate various problems, and one of them is its leakage. This causes certain inconvenience and danger for the driver, so you should find out what reasons can lead to this.
For what reasons can water flow through glass?
Typically, a leak forms at the point where the sealing rubber contacts the body or the glass itself. You should not immediately go to replace your car glass; you should study the problem, understand the reasons for the leakage and prevent moisture from entering the interior.
The reasons why the windshield leaks are as follows:
- wear of the sealing rubber, the appearance of gaps between the rubber and glass or metal;
- corrosion of body elements, which leads to the formation of holes in the metal under the rubber band;
- poor-quality installation or cheap spare parts that were used when replacing auto glass;
- incorrect selection of glazing element, problems with the geometry of the product.
Car owners often look for something to cover up a hole when their car glass leaks. If the seal is worn out, it is not worth repairing it with sealant or silicone. This may help for 2-3 days, but then you will have to contact a service center. And the cost of dismantling the seal in the presence of third-party sealants will increase.
Why does water get under the passenger's carpet?
Water may appear under the rug if the heater leaks, and then moisture will pass through the engine into the cabin.
The air intake of the stove can also bring a lot of trouble, since in order to eliminate constant puddles under your feet, you will have to clean the technical drain holes, which are located in the niche under the hood. Then it will be necessary to carry out additional repair work - seal the joints of the air duct and the body with high-quality sealant. It’s better not to waste money on it so that it lasts a long time.
How do they solve the problem at the service?
The technician inspects the installed part and looks at the quality of the installation work, if you have already replaced the glazing element. Often the drain hole in the seal does not line up with the drain in the body or simply becomes clogged. In this case, you can clean the hole or reinstall the product. Costs will only be for the work of specialists.
More often you encounter the following problems:
- a slight change in the geometry of the body during an accident - repairs are needed in a specialized workshop;
- the need to replace glass due to its incompatibility with your car model;
- there is a problem with the quality of the seal, which means you have to dismantle and reinstall the part;
- elimination of hidden corrosion if the windshield is leaking from above (usually in the corner part).
The service technician will select the appropriate method to resolve the problem and tell you how to get rid of the difficulties at minimal cost. Sometimes you will have to replace the windshield, in which case you should add the price of a decent model of auto glass to the cost of the work.
Advertisements on NN.RU – Auto
A certified truck conversion organization invites you to: lengthen, re-extend and convert, p.
A specialized company for the conversion of trucks produces extensions for man man, iveco and iveco truck tractors.
Manufacturing of a broken-type platform with retractable ramps on the GAZ-33023 Gazelle-farmer chassis. Technical characteristics of the tow truck.
A specialized company for converting trucks into tow trucks invites you to install a tow truck platform on.
Every child can become outstanding, everyone is capable of fulfilling their dreams. The main thing is to correctly determine what he likes, and...
Source: www.nn.ru
Consequences of prolonged water flow into the cabin
If you have encountered puddles in the interior of a car, then you do not need to explain the consequences of such an unpleasant phenomenon. If the windshield seal leaks, over time a real puddle will form under the carpet. A thick layer of sound insulation in this case will prevent you from noticing the problem in time and will absorb moisture. Then the typical problems for wet interiors will begin.
The main troubles are as follows:
- unpleasant smell - musty air will accompany every trip of the car owner;
- sweaty glasses and the need to wipe them with a rag, since blowing will not help in this case;
- corrosion of the bottom from the inside, which does not manifest itself in any way until the period of through destruction;
- formation of corrosion stains at the site of leakage on hidden body parts.
For these reasons, leaks should not be allowed. If you notice that your windshield is leaking, it is important to contact a specialist in time and get help. Pay attention to methods to resolve the problem. If a technician offers to replace the product with a new one without inspecting the car, he is incompetent in this matter.
The body is twisted
If it's a matter of body geometry, you can't handle it yourself, unless you're a professional straightener. Straightening the geometry is a very delicate job; even fractions of a millimeter can be important here. If the glass leaks for this reason, there are no options - you need to look for a good straightener and prepare a tidy sum. Of course, it is worth straightening the geometry only if the cost of straightening does not exceed the cost of the car itself (and this also happens). It is worth correcting the body only if your car is new and not cheap.
Professional elimination of leaks in the glass area
If you are looking to fix a leaky windshield, look no further than World-AutoGlass. We supply automobile glass from manufacturers from various countries, sell high-quality seals, and guarantee the longevity of the installed products. We also carry out repair work, find and eliminate the causes of leaks. Contact us - call the company managers for more information. Our experienced staff will eliminate the cause of the trouble and return dryness to the interior of your car.
Our addresses
- Auto glass on Ryabinovaya
, Moscow, st. Ryabinovaya, 65 District: Ochakovo-Matveevskoe (JSC) daily from 09:00 to 19:00 8 985 714-70-01 - Auto glass on Dybenko
, Moscow, st. Dybenko, 7/1 District: Khovrino (SAO) daily from 09:00 to 19:00 8 495 664-68-01 - Auto glass on Silikatny
Moscow, 3rd Silikatny proezd, 8 District: Khoroshevo-Mnevniki (SZAO) daily from 09:00 to 19:00 8 495 664-68-01 - Auto glass on Osennyaya
, Moscow, st. Osennyaya, 35 c3 District: Krylatskoye (ZAO) daily from 09:00 to 19:00 8 985 714-70-01 - Auto glass on Vasily Petushkov
Moscow, st. Vasily Petushkova, 3 District: Yuzhnoye Tushino (SZAO) daily from 09:00 to 19:00 8 495 664-68-01 - Auto glass on Dmitrovsky
Moscow, Dmitrovskoe highway, 110 B District: Dmitrovsky (SAO) daily from 09:00 to 19:00 8 985 714-70-01 - Auto glass on Leningradka
Moscow, Leningradsky Prospekt, 37 c6 District: Begovoi (SAO) daily from 09:00 to 19:00 8 495 664-68-01 - Auto glass on Skolkovsky
Moscow, Skolkovskoe highway, no. 33 b1 District: Mozhaisky (ZAO) daily from 09:00 to 19:00 8 985 714-70-01 - Auto glass on Leninsky
Moscow, Leninsky Prospekt, 127 bldg. District: Teply Stan (South-Western Administrative District) daily from 09:00 to 19:00 8 495 664-68-01 - Auto glass on Anokhina
Moscow, Akademika Anokhina, 2 k9 District: Troparevo-Nikulino (ZAO) daily from 09:00 to 19:00 8 985 714-70-01 - Auto glass on Mnevniki
Moscow, Nizhnie Mnevniki, 13a District: Khoroshevo-Mnevniki (SZAO) daily from 09:00 to 19:00 8 985 714-70-01 - Auto glass on Lipetskaya
, Moscow, st. Lipetskaya, 27 District: Biryulyovo Vostochnoye (Southern Administrative District) daily from 09:00 to 19:00 8 495 664-68-01 - Auto glass on Orekhovoy
Moscow, Orekhovy passage, 11 District: Zyablikovo (Southern Administrative Okrug) daily from 09:00 to 19:00 8 495 664-68-01 - Auto glass on Belomorskaya
Moscow, Belomorskaya st., 40 building 2 District: Khovrino (SAO) daily from 09:00 to 19:00 8 495 664-68-01
The seal is worn out
As for the wear of the seal, you can handle it yourself. To work, you will need a little time, as well as materials that can be found in regular stores. First, determine exactly where the glass is leaking. Then wipe the leak area with alcohol to degrease the surface. Using a narrow spatula, carefully pry the seal and lift it up. Coat the resulting gap with sealant or good glue (it is better to give preference to automotive products rather than construction products). Return the seal to its place, press it well. Remove any remaining sealant or adhesive that comes out from the glass immediately. When the glass dries, you can drive out into the rain again.
VAZ 2112 repair is leaking
- Registration
- Entrance
- To the beginning of the forum
- Forum Rules
- Old design
- FAQ
- Search
- Users
I'm afraid it's a little different. Leak between the valve cover and the head. The joint is sealed with sealant at this point. Leaks are common on such engines. At the same time, the tip of the spark plug wire is flooded and the oil “burns” on the upper contact of the spark plug.
I’ll probably repeat some of the earlier topics, but I couldn’t find the information I needed by searching. Sorry! The question is: how to eliminate oil leakage from under the valve cover into the spark plug wells on a VAZ 2112 engine? (The sealant there is fresh. The layer is good. But it leaks) I remember I came across an article in one of the ZRs. The author suggested using glue. But I don't remember the details. A search in the archive on www.zr.ru also did not give any results.
Oil can get into the well from under: 1. valve cover 2. Camshaft pastel. If you have oil escaping from under the R/shafts, then changing the sealant under the valve cover is as effective as replacing the rear wheels!
