A cabin filter is necessary to ensure clean and fresh air inside the car. Such elements trap small dust particles when driving on dirt roads and prevent unpleasant odors from entering the cabin. In particular, exhaust products from other cars do not penetrate inside.
The cabin filter is a consumable item that becomes clogged over time and becomes unusable. Accordingly, you need to know how to replace this element.
1449653489_2279_4_16_07_kopirovat
In this case, the arrow on the filter label should point down, and the word “front” should point toward the front of the car.
In this case, the arrow on the filter label should point down, and the word “front” should point toward the front of the car.
In this case, the arrow on the filter label should point down, and the word “front” should point toward the front of the car.
Purpose of the filter on Lada Kalina
The supply of fresh air into the cabin is provided by the stove fan. The flow passes through the cabin filter, which should capture smoke and unpleasant odors. After a certain mileage, the filter becomes clogged, so it must be removed and replaced . In some cases, you can temporarily install a used one.
When should you change the cabin filter?
The instructions included with the car state that the cabin filter should be replaced every 15 thousand kilometers. If the operating conditions of the car are harsh (frequent trips on dirt roads), then the period is halved - after 8 thousand km. Specialists at stations recommend replacement twice a year, before the start of the autumn and spring seasons.
A clogged cabin filter must be replaced with a new one.
Where is the device located?
Opinions differ about the convenience of filter placement. Some drivers believe that the device is located well, others strongly disagree with them. If the car owner has a regular station wagon, then this part is located on the right side of the car between the windshield and the hood, under the decorative grille.
What device to put in a hatchback
Today, stores offer car owners two types of cabin filters:
The first type of filter is distinguished by two layers of synthetics, between which there is a carbon adsorbent.
Types of cabin filters - gallery
Carbon filter for Lada Kalina
“Native” Kalina filter supplied from the factory Carbon filter from the Legion company
The process of replacing the cabin filter on Kalina
Before replacing the filter, we should collect everything we need for work.
- a screwdriver with an asterisk profile (T20 is ideal);
- Phillips screwdriver;
- slotted screwdriver (flat blade);
- rags;
- new filter.
Tools and Supplies - Gallery
T20 star screwdriver set Phillips screwdriver Slotted screwdriver
Sequence of operations
- Open the hood and find the place where the filter is located on the right side of the decorative trim between the hood and the windshield.
Decorative grille protecting the cabin filter of the Lada Kalina
Tip: for convenience, you can turn on the wipers and lock them in the up position by turning off the ignition. - The grille is attached with self-tapping screws, some of which are covered with plugs. Exactly how long it will be closed depends on the year of manufacture of the car. Remove the plugs by picking them up with a sharp object (a slotted screwdriver will also do the job).
Removing the plugs on the screws of the cabin filter grille of the Lada Kalina - Unscrew all the screws (there are 4 of them in total: a pair under the plugs, a pair under the hood).
Unscrewing the Lada Kalina filter grille screws located under the plugs - Having freed the grille, carefully move it, releasing first the right, then the left edges. The Lada Kalina filter grill moves to the side
- Unscrew three screws, two of them hold the protective casing over the filter, and the third one secures the washer hose. The Kalina filter housing is secured with three screws: two at the edges, one in the middle
- Slide the cover to the right until the left edge comes out from under the bracket, then pull it upward to the left. Carefully! The opening may have sharp edges! The Kalina filter housing cover is moved to the right and removed
- By bending the latches on the sides of the filter, remove the old filter. The latches of the Kalina cabin filter are bent with your finger
- After cleaning the seat, install a new filter. Kalina cabin filter housing, cleaned before replacement
- Reassemble everything in reverse order.
The ability not to change the device
Whether to change the filter or not is up to the owners to decide for themselves. If it is relatively clean, you can proceed as follows:
- The filter is removed according to the scheme described above.
- Clean the seat thoroughly using a vacuum cleaner.
- Then vacuum the filter and rinse it with running water (for severe contamination, soaking and detergents will be required).
- After which it is treated with a steam generator and blown with compressed air;
- After 24 hours, the filter can be put back in place.
Such a replacement will last for several months, but the owner will have to replace the part as soon as possible.
About differences in device location
Regardless of the class of the Lada Kalina, the cabin filter is located in the same place. Moreover, starting with Kalina-2, many parts (including filters) were transferred to all subsequent VAZ models, so the principle of replacing this device does not depend on the body type, engine size or the presence of a car radio.
The quality of the air that passengers breathe depends on the cleanliness of the cabin filter on Kalina. It is recommended to change it twice a year; the operation is not very complicated and takes no more than half an hour.
Source: https://autoclub.su/zamena-salonnogo-filtra-na-avtomobile-lada-kalina/
1449653481_2279_4_16_10_kopirovat
When installing the right windshield trim, the two tabs of the trim must extend beyond the front fender flange.
When installing the right windshield trim, the two tabs of the trim must extend beyond the front fender flange.
When installing the right windshield trim, the two tabs of the trim must extend beyond the front fender flange.
How to replace the cabin filter of Lada Kalina - instructions with photos
When to change the cabin filter
The cabin filter for Kalina can be framed in a cardboard or plastic frame. According to the owners, the cardboard sometimes “leads.”
The need for replacement arises when the filter element wears out naturally, in other words, when it loses its filtering properties.
Intensive use of the car, driving on dusty country roads - all this reduces the working life of the cabin filter.
The following symptoms indicate the need for replacement:
- Unpleasant odors appear in the cabin . This most often occurs when using carbon filters.
- The performance of the heater radiator is deteriorating . If the stove blows weakly even at full power, then it’s time to change the filter element. In viburnum, the stove air duct comes from the cabin filter. Clogging of the latter makes it more difficult for air to pass through it.
- The glass fogs up from the inside , as the flow of “clean” air from the street is hampered.
The manufacturer recommends changing the cabin filter every 15 thousand kilometers . However, in Russian realities, this consumable often lasts half as long.
Let's sum it up
There is a category of motorists whose representatives, at the slightest suspicion of any malfunction, begin to raise the alarm and, headlong, “rush” to the car service center. Here we recommend showing composure and vigilance, because many faults that arise in the Lada Kalina 2 can be easily fixed on your own. Moreover, we helped to find out where the element itself is located, as well as how to change it correctly. Why not take the chance to save money while also gaining experience. What to do is up to you!
Video instructions for replacing the cabin filter in Lada Kalina:
Do-it-yourself dismantling of the cabin filter of Lada Kalina
Replacing the cabin filter in a Lada Kalina car begins with removing the old device.
To do this, you need to clearly know where the device is located:
- Open the hood of the car.
- Look from the front passenger side, between the windshield and the engine compartment.
- The cabin filter is covered with a grille made of plastic.
To dismantle a worn product, follow the step-by-step instructions:
- Remove the grid from the plastic. To do this, use a screwdriver to unscrew the screws covered with plugs on top. If the plugs cannot be removed easily, pry them open with a flat-tip screwdriver.
- Now start removing the screws using a torx wrench. To prevent the wipers from interfering, it is also advisable to dismantle them, or, as an option, turn the car on and off when the windshield wipers are in the upward position.
- To remove the protective casing, unscrew the 3 screws.
- Finally, the casing can be pulled out. To avoid damaging the structure, first lift the side of the casing closest to the wing, and then slide it in the direction of the opposite wing.
- Carefully, trying not to use much force, bend the plastic retainer with your fingers, and then remove the cabin filter.
- Go through the free space where the old filter was recently installed with a vacuum cleaner, and remove any dust with a dry cloth.
Step-by-step instruction
It is known that the cabin filter of the Lada Kalina-2 is replaced every 15,000 km. The indicated numbers are the maximum value, that is, in practice, replacement can be made more often.
To gain access to the part we need, follow these steps:
- Approach the car and, without opening the hood, unscrew the 3 screws securing the right frill (see figure);
- Open the hood, remove the negative terminal from the battery (you need a 10mm ). Unscrew 2 more screws that hold the plastic frill and remove this part. A “t20” screwdriver fits under the head of the screws;
- Using a regular Phillips screwdriver, all you have to do is unscrew the two bolts holding the filter compartment cover;
- We remove the compartment cover, remove the filter along with the frame, and replace it.
How to understand that the cabin filter needs to be replaced
Before you find out how to change the cabin filter on the Lada Kalina, you need to prepare in advance. For this operation you will need a Torx 20, a Phillips screwdriver, and a flat blade screwdriver. So let's get started.
- We turn on the wipers, and then turn off the ignition at the most appropriate moment for us. And the moment should be when the wipers are in the highest position.
- In order to remove the cabin filter on the Lada Kalina, you need to bend the lock; if you look closely, you can see it on the right;
- The new filter is installed in the reverse order; when installing it, you need to pay attention to the direction of the arrow. It indicates the direction of air movement. If you install the filter backwards, air simply will not flow into the cabin;
- Assembly is carried out in the reverse order of disassembly.
