Recommended size of tires and wheels for Lada Granta (before and after 2021)

Standard wheel sizes for LADA Granta 1.6i 219x

The LADA Granta 1.6i 219x model was produced from 2011 to 2018. Table of standard and suitable wheel sizes for LADA Granta 1.6i 219x.

Disc drilling parameters are usually called bolt pattern:

• LZ (number of holes)
• PCD (hole center circle diameter)
• ET (disc offset)
• DIA (hole diameter)

Useful articles and reviews Announcements of certificate drawings among subscribers. Subscribe to VK group

Despite the fact that this information is taken from the websites of auto manufacturers, our catalog is for informational purposes only and does not guarantee full compliance of the proposed sizes with your car.

Lada Granta wheel sizes

Initially, the Lada Granta is supplied with wheels from size 13 to 16 from the factory.

Standard wheel sizes for Lada Granta:

Basic wheel sizes on Lada Granta range from 13 to 16 (inches). The disc width can reach 6.5 (inches), and its offset can be 38 (mm).

Disc parameters for all modifications of Lada Granta:

• Disc diameter: 13.0 (inches) – 16.0 (inches).
• Wheel width: 5.0 (inches) – 6.5 (inches).
• Disc offset: 33-38 (mm).
• Drilling: 4x98 (mm).

An option for replacing standard discs is the size 7.0×17 ET 30.

Important: size 17 wheels are recommended to be installed only on sports modifications of the Lada Granta with a powerful turbo engine.

Other names:

The subcompact Lada Granta sedan is known on the Russian market as Datsun on-Do.

Years currently in production.

What is a filter element in the fuel system?

Lada granta liftback technical specifications, dimensions of lada granta liftback. Load capacity of Lada Granta liftback. liftback lada granta trunk dimensions

The serviceable condition of the system components directly depends on the quality indicators of the fuel used. The average domestic citizen knows firsthand what harm substandard gasoline can cause to these components. The fuel filter performs the function of cleaning the fuel before it is supplied to the fuel rail to the injectors, and then as a mixture into the combustion chambers. If the owner uses a high-quality filter and refills his “horse” only at a proven station, then the system will serve without failures for a very long time.

Specialist recommendation

Other parameters of Lada Granta:

Disclaimer: Although the data represents official manufacturer figures, the information above is for reference only and is not guaranteed to be completely accurate.

We select tires and wheels for the Lada Granta

The question “which tires can be supplied on a grant” cannot be answered unambiguously. As with other cars, choosing tires and wheels is a priority for every driver, since the correct selection will ensure a comfortable and safe ride.

In order to choose the right size and find out which tires are best for the Lada Grant, you should look at many factors that directly influence the choice.

Sphere of influence of tires and wheels

To understand which tires are best suited for the Lada Granta, you first need to find out what the size of the tires and wheels of the car affects. Service station specialists note that when replacing tires, one should be guided by the fact that the difference in outer diameter is minimal.

The selection of tires affects the following features of vehicle operation:

• brake and traction characteristics;
• transmission;
• fuel consumption;
• atmospheric emissions.

Increasing the radius of the wheel, tire and rim has the following effects.

Legend: + - improvement, - - deterioration, 0 - no change.

Changing your tire size will definitely lead to changes in your vehicle's handling accuracy. As the volume of the tire becomes larger, the scale of the space in contact with the road surface increases. This provides ample opportunities for maneuverability.

Choosing wheels for the Lada Granta: tire sizes, rims, bolt pattern

When choosing tires for a car, look at the equipment, year of manufacture and sizes of Grants wheels. In addition to the drilling parameters, it is necessary to consider:

• Disc diameter. Among car enthusiasts, r14 is considered the most popular, with r15 and r16 wheels in second place. The larger the diameter, the better the appearance of the car and its behavior on the road.
• The diameter of the central hole must correspond to the size of the car hub. For Granta it is 58.6 mm.
• Rim width - the size of the surface on which the tire is located. "Lada Granta" is available with a width of 5; 5.5 or 6 inches.
• Overhang is the distance from the hub mounting pad to the axial plane passing through the middle of the rim and dividing it into 2 equal rings. This value shows how far the tire can extend from under the car's fender. The parameter affects the width of the wheelbase. The standard size for a disk with a diameter of 13 inches is 35 mm.

For the correct selection of wheels, there is a detailed size formula. The number 5 or 6 in it means the desired rim width, expressed in inches. J indicates that the disc is intended for a vehicle with front or rear wheel drive, but not all-wheel drive. The letter x indicates a forged or cast wheel. Numbers 13, 14 or 15 are the disc diameter in inches, ET is the offset in mm.

"Lada Grants": bolt pattern

Depending on the configuration, it can have different types:

1. For the Lada Granta Standard sedan there are options 5Jx13ET35, as well as 5Jx14ET35 or 6Jx14ET30.
2. The “Norma” package can be purchased with 5Jx14ET35 or 6Jx14ET30 wheels for 2011 models. Since 2012, wheels with a 38 mm offset have been produced.
3. Grants Lux discs can be 5Jx15ET35 or 6Jx15ET.
4. The “Sport” package is available on standard 15-inch wheels with a 35 mm offset or 16-inch wheels with low-profile 195/50R tires.

One of the criteria for choosing wheels for Granta, Vesta Cross, Kalina and other models is the shape and size of the bolts and nuts. It is necessary to take into account the shape of the recess in the mounting hole of the disk. Most often, the kit includes bolts with a cone-shaped clamping part with an angle of 60°, less often - flat or hemispherical. On some brands, the header is 1.3 mm in size.

The surfaces of the bolt and the disk must correspond exactly to each other. Otherwise, the tightening will weaken over time. In addition, the bolt must be long enough, but not cling to the surfaces of the brake discs.

The 16-valve Lada Granta Liftback in the Sport package comes from the factory with original 16-inch wheels. Exclusive Grants Sport models are equipped with 17-inch wheels with wide low-profile tires. In this case, it is recommended to buy an additional set of winter tires - such assembled wheels are too rigid and are not suitable for driving at low temperatures.

The Lada Granta wheel size is selected according to the following rules:

• For p13 stampings, tires with a profile from 65 to 75 and a width of 175-185 mm are suitable. Standard factory tires have dimensions of 175/70/R13.
• For p14, tires with a profile of 55-65 and a width of 175-185 mm are allowed. Installed on Granta Universal models 2021 and later.
• The standard equipment for p15 wheels is tires with a standard size of 185/55/R15. These sizes are suitable for summer and winter tires.
• The Granta has 16 rims and is equipped with tires with a profile of no more than 50 and a width of 195 mm.
• The best option for a Granta with 17 wheels is tires with parameters 205/40-45/R17. In this case, the bolt pattern on the Grant remains the same.

When buying winter tires, you should pay attention to the narrowest options. This will increase traction due to weight distribution

The lowered profile is inconvenient for driving on uneven roads in winter and summer - even small potholes are well felt by the driver and passengers.

Table of ideal wheel and tire parameters

Based on the opinions of auto experts and reviews from owners, compatibility tables for wheel and tire sizes on Lada Granta, Kalina and other models of this brand were compiled.

Table 1. Lada Granta bolt pattern

Table 2. Lada Granta bolt pattern

Table 3. Lada Granta bolt pattern

If the Lada Granta wheel size does not correspond to the recommended one, the car owner may be denied warranty repairs. In addition, such a car runs the risk of not passing the next technical inspection.

Factory specifications of tires and wheels for LadaGranta

According to the factory specifications, the original tires supplied from the factory have a radius of R14 and R13. R14 is a fairly classic option for small cars. Both wheels and tires with these dimensional characteristics are inexpensive and are quite easy to find on the market. The situation is similar with the R13. Therefore, when analyzing which discs are suitable for the nagrant, you should keep this point in mind.

Size characteristics of tires and wheels, which are also suitable for LadaGranta Currently, all AvtoVAZ models with front-wheel drive are equipped with R15 size wheels. And although the original Lada Granta R15 tires with this wheel model have dimensional characteristics of 185/55, they will also fit well with tires 175/70, 185/60 and even 195/55.

Lada Granta Sport tires have a factory size of R16. The dimensions of the tire itself are 195/50. On the Grant Sport, the tire size dictates that the rack is shortened, allowing even the smallest wheel to fit into the space for it. With this wheel diameter you can safely install tires of sizes 175/50, 184/45 and even 195/40.

A little about wheels

Tires - Today, these are one of the most high-tech products on which safe and comfortable movement by car directly depends. There are a large number of tires on the market today from many different manufacturers. They consist of a frame, a protector and a breaker layer between them. And also the toughest part of the tire - the bead, which is designed for reliable fixation and sealing on the rim.

Disks - In the modern world, a wheel includes two parts: the rim - which is a surface closed in a ring with sides on which the tire is fixed, and the disk - which is a support for the rim with holes for fixing the entire wheel to the hub, most often using bolts or hairpins. Currently, there are the following types of discs: stamped, cast, forged, composite and combined.

What is the effect of different tire and wheel sizes?

View of Lada Granta with different types of tires

In order to more clearly understand how the appearance of a car will change depending on the type of tires and wheels, we offer a collection of pictures.

We're sorry, but the requests coming from your IP address appear to be automated. For this reason, we are forced to temporarily block access to the site.

To continue, please enter the characters from the image in the input field and click "Submit".

Cookies are disabled in your browser

. We will not be able to remember you and correctly identify you in the future. To enable cookies, follow the tips on this page.

Factory tire pressure parameters LadaGranta

The pressure in the grant tires of the basic factory configuration, namely R13 and R14 at partial load looks like this: R13 (175/70) - 0.19/0.19 (1.9/1.9) R14 (175/65) - 0 .20/0.20 (2.0/2.0) Data are presented in the ratio “kg/cm2”. The pressure in Grant Sport tires is approximately at the same level, adjusted for the dimensional characteristics of the wheel, namely R16.

Reference data

VAZ Kalina 2021 EL

Wheels and tires

VAZ Kalina 2021 1.6 16V

Wheels and tires

VAZ Kalina 2021 1.6

Wheels and tires

Wheels and tires

Correctly checking tire pressure. Recommendations

Constant monitoring of tire pressure levels ensures safe travel and prevents tire wear. If the pressure is at a low level (below 1.9 atmospheres), then the side parts of the tread, due to the uneven distribution of air when driving, will wear out much more. When tires are overinflated (above a value of 2.0), the middle part of the tread will suffer, which is also fraught with consequences.

List of negative consequences from uneven distribution of tire pressure:

1. the scale of contact with the road is expanding;
2. rapid and uneven tread wear;
3. decreased vehicle controllability;
4. potential danger of creating an emergency situation on the road.

To correctly measure tire pressure, you will need a pressure gauge. Measurements should be taken some time after the trip, so that the air in the tires has time to cool down after intense heating during driving. The optimal value (for R13 – 1.9, for R14 – 2.0) is indicated as a number that can be found on the gas tank or car door. It is important that when using the pressure gauge, air does not escape from the wheel.

The resulting value must be compared with the optimal one and pumped up to the desired value. For wheels that are parallel and on the same axis, the pressure level should be identical.

Is it possible to install wheels of size R16 205/55 on the Lada Granta

Wheels with a radius of R16 and dimensions of 205/55 are not suitable for both the regular LadaGranta configuration and the Sport model. Due to their too large diameter, they will fit too tightly, which when driving will lead to rapid wear of the treads and reduced maneuverability of the vehicle. Owners of Lada Granta recommend installing 195/50 or 205/45 with a radius of R16.

Winter tires for Lada Granta

The selection of winter tires for the Lada Granta should be based on the characteristics of the terrain on which you will have to drive. If the roads are not cleared enough, and the winter threatens frequent thaws followed by frosts, then in this case you should use studded tires.

Tires for winter use must have soft contact with the road surface, which will provide a reliable degree of traction even on packed snow, and the tread base must be rigid for precise steering. Goodyear, Pirelli and Dinlop Winter companies have the necessary dimensional characteristics for the Lada Granta, namely in the range from R13 to R16.

Winter tires will also require running-in to ensure they fit firmly in their seats. For a good break-in, you will need to drive about 500 kilometers. When running in, you should try to avoid sudden braking and slipping. To improve traction, it is also recommended to choose tires with a narrow profile.

A short checklist - How to buy tires for the Lada Granta correctly

1. You should look for the right tires, keeping in mind the factory dimensional specifications. The size of the selected tires must match these data. 2. Pay attention to the tread pattern. Driving comfort largely depends on it.

3. Pay attention to the width parameters. The acceleration and braking of a car is affected by the width of the spot converging with the road surface. 4. Particular attention should be paid to the bore diameter. Tires that are excessively high or wide can damage the suspension, while tires that are too narrow will increase the load on the bearings. 5. It is important to consider the maximum speed index and load capacity index. 6. Treadwear, Traction, Temperature and MaxPressure data provide information on the tire's factory wear life, braking performance, temperature resistance and pressure limit for the tire respectively.

Lada Granta wheels

Lada Granta is a pretty new car. The first Grants appeared a couple of years ago and did not arouse much trust or interest, as the very ambiguous reputation of the manufacturer itself was reflected.

However, at the moment the Lada Granta is the best-selling car in all regions of the Russian Federation in its price segment.

In addition to the growing demand for the car itself, interest in consumables and car components, in particular, wheel rims, began to increase. The insufficient quality of roads in the Russian Federation leads to rapid wear or deformation of the disks, and yet choosing a high-quality sample for the Grant is not so easy!

Dimensions

For the Lada Granta Sport, it is possible to install different wheel sizes. As standard, the car comes with 15 and 16-inch alloy wheels. These dimensions are calculated by the designers as optimal for a sports car. In this case, the chassis will operate most efficiently and have a minimum level of wear on components and parts. Exceeding the recommended dimensions is at your own risk and may have undesirable consequences.

If possible, when replacing wheels it is best to install ones made by forging. These are the most durable and lightweight products that can significantly improve the performance of the machine.

To select high-quality rims for Grant Sport, you need to know the size of the mounts and other parameters, as well as determine the optimal size of the wheels themselves.

What kind of disks can be installed?

The manufacturer recommends installing only the original set of disks on the Grant, however, many drivers often resort to installing analogues of non-standard parameters.

In the case of installing non-original rims or tires, it is necessary to take into account the characteristics of the vehicle: with the correct selection, the car’s handling will improve and the cost of components will decrease, if incorrectly, you will have to buy other new parts or repair the chassis and suspension in the near future.

This is interesting! Drivers operating the Lada Granta have more than once noticed that the original set of wheels for winter tires does not always successfully cope with the assigned tasks. Many drivers recommend choosing wheels for the winter with the narrowest form factor possible, which should have a positive effect on the vehicle’s handling.

Wide rims, which require the installation of wide-profile tires, are more prone to the car skidding or hydroplaning when traction is lost on the road surface on the highway.

Important to remember! When selecting wheels for the Lada Grant, special attention must be paid to tires. Most tires have a maximum load index of no more than 750 kg, which prohibits the operation of the vehicle in an overloaded state.

The Lada Granta, loaded with a total weight of about 3 tons along with the car body, loses a lot of control; in addition, overloaded tires transmit mechanical pressure more strongly to the discs, which can cause deformation of the latter.

Characteristics of wheels on Lada Kalina Cross

Tire and wheel sizes for Lada Largus 2012

Starting in 2014, Russian engineers of the AvtoVAZ concern slightly adjusted the suspension of the Lada Kalina station wagon and they got a crossover, since the car was raised a few more centimeters above the ground. In addition, the necessary attributes for a small SUV were added to this version, and a fundamentally new car rolled off the assembly line - the Lada Kalina Cross. Of course, in order to match the qualities of the SUV, the car is equipped with slightly different rims.

The wheel size for Kalina Cross in the simplest configuration is 5.5J x 14 ET35, and for a slightly more expensive modification - 6.0J x 15 ET33, which corresponds to tires 175-185/55-65/R14-R15, but in this In this case, the car does not look very impressive due to too large gaps between the rubber surface and the wheel arches. Therefore, many car enthusiasts change the tire profile without touching the wheels to 70 and even 75 mm, which creates the effect of a real SUV.

In richer trim levels, the car is equipped with a slightly larger radius of wheels with parameters 6.5J x 15 ET30, and 195/55/R15 tires fit perfectly on them. This size is in high demand among buyers, as it is optimal for both smooth asphalt and off-road trails.

Wheels for Lada Kalina Cross

When purchasing a car, drivers try to choose exactly the modification that was initially equipped with alloy wheels from the K&K company, with 5 standard spokes in Silver color, because the caps on top of the stamped products often fly off and break when used on bad roads.

For those budget-conscious buyers, the most basic modifications come with stampings in both 14- and 15-inch radii, and they look pretty good when paired with branded plastic hubcaps.

Those same car enthusiasts who try to install R17 and higher wheels on this VAZ modification, with low-profile tires, taking advantage of the relatively high ground clearance, risk completely damaging the shock absorbers in the first year of operation of the vehicle. Thus, if the edge of the wheel extends too far relative to the axis of its attachment to the hub during maneuvers on the road, a significant load is placed on the mating element, which can cause deformation of the axle along with the brake disc, hub and studs, which will lead to their inevitable replacement.

Car disk warehouse

Many Kalina owners are often interested in used wheels that are actively posted by past owners on the Internet. However, this purchase will be very doubtful, since no expert can guarantee the ideal geometry of the product and the absence of any microcracks on it after an accident or other mechanical impacts.

This means that to save money, you should abandon such options and simply buy a new stamped wheel with decorative linings instead of putting your car and your own health at risk.

*Prices are current as of December 2021.

What you need to know about sizes and parameters

When choosing wheels for the Lada Granta, first of all, you need to select models based on the number of fixing holes, as well as the circumference of their location. In other words, you need to check the number and drilling of the fastening bolts, but, as a rule, there are no problems with sticking out.

Wherein:

• Drilling of fastening bolts (LZ*PCD) must correspond to the value 4*98;
• The diameter of the hole in the center of the disk must be strictly the size of the wheel hub, namely 58.6 mm;
• The maximum permissible overhang value is no more than 25 – 38 mm;
• The optimal disc diameter is from 13 to 16 inches.

The diameter of the rims on the Lada Granta depends on the year of manufacture and equipment of the car, however, any option from 13 to 16 inches can be installed on the vehicle. At the same time, the wheel parameters are absolutely independent of the body form factor - on a sedan, hatchback or station wagon, all wheels are identical.

You also need to remember that with a forced increase in the diameter of the wheel rims on a car, problems may arise with sensors that calibrate the electric power steering or the operation of anti-lock wheels when braking. Inaccurate operation of the sensors negatively affects controllability and can cause an emergency situation on the road.

The easiest and most effective way to select rims for the Lada Granta is to search for components by vehicle VIN number on the manufacturer’s official website.

To do this, just select the part numbers of the wheels that you would like to install on your car, and then check them with the VIN code for compatibility.

This method will allow you to avoid many problems, and will also allow you to quickly select the desired option. Remember, an incompatible set of wheels with the vehicle design or rubber form factor will negatively affect performance, which can cause an emergency on the road.

In addition, an incorrectly selected set of discs increases wear on the tread pattern on the tires and can cause failure of the suspension system.

Parameter description

The installed rims have a huge impact on the behavior of the car on the road, its stability, handling and other characteristics. Safety, dynamics and appearance will depend on their size and parameters. To select, purchase and install a wheel on a car, you need to have information about the bolt pattern parameter. At the moment, for the entire model range you can buy both original factory products and those produced by various domestic and foreign companies. For example, the popular brand “K&K” has an agreement with the manufacturer and produces a special line for Lada models.

Grant's bolt pattern, original wheel and tire dimensions

New wheels made in an individual design will help perfectly decorate the appearance of the vehicle. However, the most common reason for replacement is wear and tear or a change of season. But car tuning is still very popular. They do it to give the car a sporty feel. One of the main elements to replace when tuning is the wheel rim.

A similar rule applies not only to any Lada model, but also to any other car, regardless of manufacturer and model.

"Granta" is available in sedan, liftback and hatchback body styles. This allows car enthusiasts to choose the most convenient type of execution. The diameter, width and drilling of the discs do not depend on the body type.

During the operation of the vehicle, the former interest is often lost, the appearance becomes boring and you want to change something. In this case, tuning comes to the rescue, allowing for visual and technical improvements. It is possible to replace some car components with improved, sportier and more attractive ones. The main part on which the appearance depends is the rims. In this regard, car enthusiasts change them first. However, for any vehicle, wheels are not only part of the exterior, but also an important design element, the size of which, the method of their production, weight and many other characteristics determine the vehicle’s stable behavior on the road surface, handling and dynamic qualities.

But it is not enough to simply improve the design of the car by installing new structural elements

It is important that these improvements do not reduce the vehicle's operating efficiency and performance. In order for the replaced parts to serve efficiently and for a long time, it is necessary to select and install original components that meet all quality and safety parameters

A new set of wheels must comply with all parameters declared by the manufacturer. This applies to both the bolt pattern and the dimensions of the width and offset of the rim. It is also necessary to select high-quality tires for the season, since inaccurate sizes will negatively affect operation. The drilling parameter determines whether the selected rim can be installed on the car. If the parameter does not match, then it is necessary to use adapter rings, which entails undesirable interference in the factory design.

In any car model, the bolt pattern parameter is designated as PCD, which stands for Pitch Circle Diameter. An extremely simple explanation of the meaning of the term sounds like this: the required number of bolts to secure the wheel and the diameter of the circle on which the holes for them are drilled. The presented indicators are important when choosing a new set of wheels, so that the car owner does not have any difficulties during the purchasing process. Knowing the meaning of drilling, you can choose the most suitable ones from all the wheels available in the store.

Winter tires for Kalina Cross, size 195/60 R15

It is almost impossible to determine by eye what diameter the bolts are located on a particular car, in contrast to the number of fasteners, which can be easily counted. To measure the diameter, you need a ruler, or better yet, a caliper, as well as knowledge of special formulas, which vary depending on the number of fasteners.

It is very important to remember that the incorrect selection of wheels and tires for the Lada Granta can lead to breakdown, increased wear, or even an accident. If, nevertheless, a product was purchased with inappropriate fastener sizes, they must be returned to the store and replaced with the correct ones.

It is not recommended to use non-corresponding wheels with different spacers for safety reasons.

What wheels to install for Lada Granta

Due to the popularity of this vehicle, all known types of wheels can be found on the Russian auto components market.

The most popular options for Lada Granta are:

• Stamping – Stamping steel is considered the most popular option due to its relative durability and affordable cost. Also, a rather strong advantage of the stamps is their reaction to road conditions - when hit, the discs bend, as a result of which they are easily amenable to further repair. The disadvantages include the unattractive appearance and high weight, and if the design is corrected by installing caps, then you will have to put up with an increase in fuel consumption and a decrease in engine dynamics;
• Casting – Casting wheels are made from magnesium or aluminum. Among the distinctive advantages of this option, it is necessary to highlight low weight and high thermal conductivity, due to which it is possible to stabilize the dynamics of the engine, as well as increase the cooling rate of the brake mechanisms. In addition, casting technology allows you to create products of any design and form factor, which helps to customize the car and give the car a touch of individuality. The disadvantages of casting are considered to be high cost and poor strength - in the event of a strong collision, the discs are painted, which will make the structure completely unrepairable;
• Forging - the forged version is made according to a different principle than the options described above. Among the advantages of forged wheels, it is necessary to highlight the high strength and lightness of the structure, which has a beneficial effect on the handling of the car. The low weight of the discs allows you to reduce fuel consumption by transmitting torque from the transmission to the tire itself without loss, and the absence of welds protects the product from the risk of coloring upon impact. This option is perfect for any season or driving style of the driver, but is characterized by a rather high price.

The stock version of the Lada Granta is either stamps or light alloy casting - depending on the vehicle's configuration. The budget version of the Grant will be sold on stamped wheels, which are characterized by a long service life, and the medium and maximum versions will be sold on aluminum alloy wheels for a more attractive appearance.

Grant fret wheel size – Car repair and maintenance

Green indicates the minimum deviation of the wheel diameter (up to 3 mm); Orange indicates a diameter deviation from 3 to 6 mm.

Based on reviews from owners, we have compiled a list of compatibility of Lada Granta tires and wheels:

• R14 wheels on Granta can be installed with the following tire parameters: 175/60 ​​R14, 175/55 R14, 175/50 R14, 175/45 R14, 175/40 R14, 185/55 R14, 185/50 R14, 185/45 R14 , 185/40 R14, 195/50 R14, 195/45 R14, 195/40 R14, 205/55 R14, 205/50 R14, 205/45 R14, 205/40 R14 and 205/32 R14.
• R15 wheels on the Grant are installed with the following parameters: 175/50 R15, 175/45 R15, 175/40 R15, 185/50 R15, 185/45 R15, 185/40 R15, 195/50 R15, 195/45 R15, 195/ 40 R15, 205/50 R15, 205/45 R15, 205/40 R15 and 205/32 R15.
• R16 wheels on the Grant are equipped with tires: 175/50 R16, 175/45 R16, 175/40 R16, 185/45 R16, 185/40 R16, 195/45 R16, 195/40 R16 and 205/32 R16.
• R17 wheels on Granta

07.05.2015

The external architecture and internal technical side of the car harmoniously respond to each other. Take 15 wheels on the Grant, which are provided in the serial production of the car.

The diameter, weight and other characteristics of such discs not only perfectly meet the requirements of the declared power of the car, but also fit perfectly into the design of the car. The Lada Granta, equipped with 15-inch wheels, looks harmonious in relation to its dimensions.

– The diameter of the stamped-welded discs is 13 inches; – Planting width 5.0; – ET (wheel offset) 35; – Bolt pattern 4x98;

– DIA (hub bore size) 58.6.

– Diameter of alloy wheels 14 inches; – Planting width 5.5; – ET (wheel offset) 35, 38 – depending on the year. 2011 – 35; 2012 – 38. – Bolt pattern 4x98;

– Diameter of alloy wheels 15 inches; – Planting width is 6; – ET (wheel offset) 35; – Bolt pattern 4x98;

We can conclude that, regardless of the configuration, only the bolt pattern and the size of the hub hole remain unchanged. The rest is individual.

Of course, if you really want to, you can install a 15-inch casting on any Granta and not experience any discomfort. The main thing is to know the parameters of your car and take them into account when choosing new disks.

The database of a good store contains information about the compliance of wheels and various modifications of automobile brands. It is enough for the seller to find out the model and year of manufacture of the car in order to offer the client a large selection of necessary disks.

1. ET or disc offset is a number that indicates the distance between two planes. Namely: between the place where the disc comes into contact with the hub and the area of ​​vertical symmetry of the wheel.

2. DIA or hub hole size - the mounting diameter of the disc hub. When choosing, it is necessary that this value coincides with the size of the hub (hole diameter) on the car. Measured in mm, can be measured with a ruler.

3. Bolt pattern, for example 4x98. In this case, 4 is the number of holes for securing the wheel with bolts. The number 98 indicates the distance at which they are located.

4. The width parameter is the width of the rim; in our case, rims 15 on the Lada Granta have a width of 5; 5.5; 6 – depending on the configuration. Measured in inches.

Thus, having this information, you can easily select wheels for the Grant 15. The main topic for thought now will be - what version should you choose for the wheels 15 for the Grant, cast, forged, collapsible Original or replica? Which manufacturer is better?

Here, as they say, it’s the boss’s business. The main guideline is usually the budget.

• A huge number of different models on sale;

• Light weight, which improves vehicle performance, including lower fuel consumption;

• Relatively low price compared to forged wheels;

• The alloy uses metals that are resistant to corrosion, which ensures long service life with careful care.

The beautiful and reliable Lada Granta car, whose 15 rims will add more extravagance and attractiveness, harmonizes perfectly with both powerful alloy wheels with large spokes and thin ones. However, rims with thin and sparse spokes are more susceptible to deformation than more powerful ones.

Author of all articles on the site! Own service “New Line Auto” All types of work.

Specialization: Lada