Tire and wheel sizes for VAZ 2115 2007

When choosing wheels for a VAZ, you need to look not only at their appearance, but also at the possibility of using them on a particular model. In addition, certain technical characteristics must be taken into account.

The most important of them are:

• bolt pattern;
• diameter;
• departure;
• fastening elements;
• diameter of the centering hole.

Basic drive functions

Wheel rims on a passenger car perform a number of important tasks:

• rubber seal around the perimeter;
• ensuring a rigid structure under the total weight of the vehicle;
• transmission of torque to the wheel.

Based on these functions, the car enthusiast can formulate requirements for the disks, as well as their technical characteristics. Any wheeled product must be balanced in size, durable and safe. Only after this can you proceed to drilling wheels on VAZ cars.

What is the diameter of the hub (exact factory data)

According to the regulatory documentation provided by the manufacturer, the hub diameter on the VAZ-2114 is 58.5 mm.

Thus, the bolt-to-bolt size is 4x98 , which allows you to install wheel rims with sizes R13, R14 and R15 . To secure the wheels to the hub, use bolts measuring M12x40 mm .

Standard stamping for factory hub

In order to choose non-standard stampings, but, for example, non-standard alloy wheels, it is necessary to change the size of the hub and the inter-bolt space. Of course, the manufacturer and car enthusiasts do not advise doing this unless absolutely necessary, so you should think several times before taking this action.

The most common size on European cars is 4*100 . Therefore, many people want to install just such disks. This is the hub size for Hyundai Accent and Renault Logan.

Catalog of VAZ-2114 hubs

Hub made by AvtoVAZ

2108-3103012 – original catalog number of the front wheel hub manufactured by AvtoVAZ. Using this article, you can determine a list of analogues that are suitable for installation on the Lada 2108-21099 and 2113-2115 family of cars.

Standard stamping on the rear wheel, hub diameter 4*98

So, using the catalog number, it is determined which hub becomes available for installation.

Syverlovka and bolt pattern of VAZ wheels

Wheel bolt pattern on VAZ 2107

The design of the seven involves drilling 4x98 wheels, where the number 4 indicates the number of bolts, and 98 indicates the diameter of the holes on the disc structure.

Many foreign cars use a bolt pattern with similar parameters – 4×100. In the first situation, the distance between the centering bolts is 69.3 mm, and in the second case - 70.7 mm. The error is 1.4 mm and does not allow for tight fixation of a non-standard disc.

In addition, installing a car disk with non-standard parameters can lead to deformation of elements, namely mounting holes and bolts.

There are other methods for attaching 100x4 rims to the seven. For example, you can use extended bolts, adapter rings, studs and eccentrics. However, these parts can ultimately complicate or impair the mounting of the wheel product.

Therefore, it is recommended to install standard car wheels and tires so as not to lead to wheel imbalance and vibration while driving.

Wheels on the VAZ 2107 are equipped with 13-inch stamped wheels or analogues with identical parameters. Tires have dimensions 175/70/R13.

The nominal pressure in “seven” tires directly depends on the tire sizes:

175/70/R13 – 1.9 rear, 1.6 front wheels;

165/80/R13 – 2.0 rear, 1.7 front.

Wheel bolt pattern on model 2106

For a six, the wheel bolt pattern is 4×98. As for the factory dimensions of the disks, then:

• standard width is 5.0J,
• centering hole 58.5 mm,
• departure ET

Tire size for the six is ​​175/70/R13.

As a restyling, you can install wheels 185/60/14, 195/50/R15.

Drilling on the VAZ 2109 model

The VAZ 2109, “nine”, has factory settings for the wheel bolt pattern of 4×98. The factory equipment was equipped with 175/70/R13 tires and 13-inch wheels.

Wheel bolt pattern on VAZ 2110

The tenth VAZ model is equipped with factory stamped 13-inch wheels and 175/70/R13 tires. There were also dozens of configurations with 14-inch casting and 175/65/R14 tires.

As for the dimensions of VAZ factory wheels, the width is 5.0-5.5J, drilling is 4×98, as on other models, the centering hole is 58.5 mm and the offset is ET 37-40.

Drilling on 2111

The Lada station wagon 2111 was equipped with 13 or 14-inch wheels from the factory, depending on the vehicle's configuration. Both options could be used.

Tire sizes: 175/70/R13, 175/65/R14, rims: width 5.0J, drilling 4×98, centering hole 58.6 mm, offset ET40.

Drilling on the VAZ 2114 model

Lada Samara 2113, 2114 cars were equipped with factory stamps with a 4x98 drill bit.

VAZ 2115 2115x 2011 1.5i

Generation: 2115xEngine: I4, Gasoline Power: 77 hp (57 kW)Rim bolt pattern parameters

What wheel sizes does the manufacturer recommend to install?

The VAZ 2115 2115x 2011 1.5i is equipped with 5Jx13 ET35 rims assembled with 175/70 R13 82T tires as standard. Where:

• 5J - rim width in inches;
• 13″ — tire diameter in inches;
• ET35 - disc offset in millimeters.

The vehicle tire marking 175/70 R13 is deciphered as follows:

• 175 — profile width (cross section of the tire) in millimeters;
• 70 - profile height as a percentage of its width;
• R - radial cord winding;
• 13 - tire diameter in inches.

In addition, information about its load capacity and speed parameters can be printed on the rubber - load index and speed index. The load index is a two- or three-digit number; the speed index is indicated in Latin letters, for example 82T:

• 82 - maximum permissible tire load 475 kg;
• T — maximum permissible vehicle speed is 190 km/h.

Using the recommended tire sizes will help you avoid problems with handling, safety and other difficulties. What non-standard sizes can be supplied? Refer to the table; it indicates possible acceptable alternative sizes for tuning. Although there are other options that we have not described in the table. For example, wider discs of the same diameter. Or install wheels of the same width, but with a larger diameter, which is quite popular among car owners. The choice of discs is huge; you can find copies with the same parameters, but with an overhang 1-2 millimeters more or less. It is not possible to list all the options.

At the same time, the bolt pattern for all types of wheels is the same - 4x98. Thus, all disks are mounted on four bolts and the distance between them is exactly ninety-eight millimeters. The diameter of the car's hub is 58.6 mm.

Standard tire pressure is 1.9 MPa.

Wheel rim bolt pattern on Lada

Bolt pattern is a calculated characteristic of wheels, which determines the number of mounting holes and the diameter of their location circle. This characteristic is the same for almost all AvtoVAZ models and depends on the following vehicle indicators:

Wheels for VAZ 1111

• The weight of the car in running order, that is, fully equipped, with passengers and the maximum possible weight of cargo in the trunk.
• The nature of the vehicle’s operation, namely how important overloads are for a given vehicle. If we are talking about a city sedan, then a bolt pattern of 4 studs is quite enough for it, but a crossover or SUV is certainly equipped with 5 or 6 threaded rods, because off-road driving can temporarily increase the load on the wheel several times.
• Dynamic properties of the car. When entering a turn at high speed, as well as getting into holes, the impact increases the load on the hub studs exponentially.

General background information

Ranges of possible values ​​for tires and wheels VAZ 2115 2008.
Tires

Wheel disks

Photo

Expert advice

When choosing tires for a car, you must first follow the manufacturer's instructions. Ask yourself a few questions.

• On what roads will the car be primarily used?
• Do you need increased cross-country ability?
• How much of the route will be city roads and how much will be highways?
• Will the vehicle carry heavy loads?

The answers to these and similar questions will help determine which tire parameters you need to pay special attention to.

How to choose the right wheels for a VAZ 2115 2008?

3 types of rims:

• Stamped (economical price category) - made from a sheet of iron by stamping on a press.
• Light alloy - manufactured by casting (more reliable than stamped ones).
• Forged (the highest quality and more expensive than the previous ones) - made from light alloys by stamping at high temperatures.

The choice depends on financial capabilities. However, it should be borne in mind that the quality of the road surface on which you have to drive every day must also be taken into account.

So, if it gets into a hole, a stamped disk will bend and will not cause harm to the tire, but a forged or cast one can cut it. There is a possibility that the cast disc may burst or crack.

It should also be noted that repairing “stamping” wheels is cheaper than repairing cast or forged wheels. But wheels with high-quality cast and forged disks kill the suspension less, because lighter and have more perfect geometry (better balanced).

The same wheels may or may not rub with tires on the same car - wheel alignment adjustment will help here.

What is the tire pressure?

It is the driver's responsibility to constantly monitor tire pressure. This will avoid standard problems associated with vehicle operation. An abnormal pressure value often causes:

• deterioration of management;
• uneven tread wear.

Often the car owner independently reduces the pressure in the wheels of his own vehicle. This reduces the load on the suspension, and the car “passes” various road irregularities an order of magnitude easier. But it is worth noting: a decrease in pressure even by 0.1 MPa leads to serious problems. The main ones include:

• increased fuel consumption;
• rapid wear of the outer tread segments;
• the car becomes less maneuverable.

An overinflated wheel causes no less problems. The central part of the cylinder begins to wear off quickly. In addition, at ambient temperatures of more than 60 degrees Celsius, the tire may simply explode. Which will lead to driving into the oncoming lane.

Information on wheel bolt patterns on domestic VAZ vehicles

All VAZ cars from the very foundation of the plant to the present day had only 3 main types of bolt patterns, since most modifications were made on a single platform, only their appearance changed. The bolt pattern for most Lada models looked like this:

• The smallest representative of the automaker - VAZ 1111, popularly called "Oka", was produced in the Russian Federation for 20 years - from 1987 to 2008. Considering that the weight of this especially small class car was only 975 kg, and the load on the wheel was less than 250 kg, Oka became one of the few representatives in its class for which a bolt pattern of 3 studs was used.

It was quite problematic to find a similar wheel size on the market, so stamped products with a radius of R12 and R13 were often re-drilled in order to successfully fit on the hub.

Bolt pattern VAZ 2107 4x98

• The vast majority of models of the AvtoVAZ concern, starting from 2101 and ending with the Lada Priora or Kalina, were produced from the assembly line in the form of sedans, liftbacks, hatchbacks or station wagons of the compact or subcompact class.

Starting from 1966, when the concern released its first “penny”, and ending in 2015, the wheel bolt pattern for these cars was 4x98 mm, the diameter of the central hole was 58.1 mm.

The most popular Lada models today, for which wheels with a 4x98 bolt pattern are still sold, are VAZ 2106, 2107, 2109, 2110, 2112, 2114.

• The latest VAZ models, such as Vesta, Granta and X-Ray, produced since 2015, have a wheel pattern as close as possible to the international standard for compact cars. This parameter on the specified modifications is 4x100.

• Among all the products of the AvtoVAZ concern, such models as the VAZ 2121, or the classic Niva and all derivatives of this SUV have always stood out: the 5-door Taiga, Chevrolet Niva and other models. Due to increased loads on the hubs and wheels due to unsatisfactory road conditions, for which all parameters of the Niva were designed, these compact all-terrain vehicles traditionally had a disc bolt pattern of 5x139.7, with a central hole diameter of 98.5 mm.

VAZ 2115 2115x 2008 1.6i

Generation: 2115xEngine: I4, Gasoline Power: 82 hp
(60 kW) Wheel bolt pattern parameters

What wheel sizes does the manufacturer recommend to install?

The basic version of the VAZ 2115 2115x 2008 1.6i is equipped with 5Jx13 ET35 rims assembled with 175/70 R13 82T tires. Where:

• 5J - rim width in inches;
• 13″ — tire diameter in inches;
• ET35 - disc offset in millimeters.

The vehicle tire marking 175/70 R13 is deciphered as follows:

• 175 — profile width (cross section of the tire) in millimeters;
• 70 - profile height as a percentage of its width;
• R - radial cord winding;
• 13 - tire diameter in inches.

In addition, information about its load capacity and speed parameters can be printed on the rubber - load index and speed index. The load index is a two- or three-digit number; the speed index is indicated in Latin letters, for example 82T:

• 82 - maximum permissible tire load 475 kg;
• T — maximum permissible vehicle speed is 190 km/h.

Using the recommended tire sizes will help you avoid problems with handling, safety and other difficulties. What non-standard sizes can be supplied? Refer to the table; it indicates possible acceptable alternative sizes for tuning. Although there are other options that we have not described in the table. For example, wider discs of the same diameter. Or install wheels of the same width, but with a larger diameter, which is quite popular among car owners. The choice of discs is huge; you can find copies with the same parameters, but with an overhang 1-2 millimeters more or less. It is not possible to list all the options.

At the same time, the bolt pattern for all types of wheels is the same - 4x98. Thus, all disks are mounted on four bolts and the distance between them is exactly ninety-eight millimeters. The diameter of the car's hub is 58.6 mm.

Standard tire pressure is 1.9 MPa.

Features of wheel sizes for the most popular VAZ models

Among several dozen VAZ modifications, the most popular models over the entire 50 years were only 2 of them, as can be judged by the number of copies sold. The wheel sizes for these cars had the following parameters, which varied depending on the year of manufacture, technical equipment and equipment of the car:

• VAZ is the latest modification of the “classic”, produced on the plant’s conveyors for 30 years: from 1982 to 2012. During this time, it never changed its appearance, and the disc bolt pattern was the same - 4x98 with a central hole diameter of 58.6 mm.

If in 1982 the plant produced models with tire dimensions ranging from 5J to 5.5J, then at the end of production the concern increased the permissible size to 6J.

The radius of the wheels invariably varied from R13 to R15, which made it possible to alternate them by season, periodically changing the side profile of the tire, or immediately use all-season tires with a diameter of R14.

The VAZ 2107 tire size invariably consisted of only 3 main parameters - 175/70/R13, 185/60/R14 and 185/55/R15. The last of the listed parameters was actively in demand among lovers of fast driving on smooth city roads.

If we look at the concern’s earlier cars, we can see that the wheelbase of the Zhiguli has remained virtually unchanged for more than 40 years. This leads to moral backwardness of the technical equipment of the plant's products. At the same time, the lack of new developments greatly reduces both the speed of release from the assembly line and the cost of engineering equipment, which leads to a very attractive retail price for the vehicle.

• VAZ 2114. Produced in a smaller range - from 2001 to 2013. The car was just a restyled modification of the classic “nine”. The legacy of the outdated model did not affect the high popularity of this Lada, and all the wheels that were installed on hubs in the basic version had the same traditional bolt pattern 4x98, DIA 58.6 mm.

European standard bolt pattern 4x100 for Lada X-Ray

• Like the bolt pattern of the VAZ 2114, the width of the wheel rims was not much different from the “seven” and fluctuated between 5J – 6J for the entire production period. As for radius, the concern has completely eliminated the 15-inch diameter from the factory equipment, without prohibiting drivers from installing this parameter as an option. The bolt pattern of VAZ 2114 wheels in the current size also made it possible to install standard 4x100 wheels in accordance with the sizes usual for Europe.

Not a single Lada model has ever looked aggressive; the hallmark of the product was practicality and reliability in operation. The concern did not use extreme overhang indicators, and the wheels were always hidden under the body arches. The average ET limit values ​​for both VAZ 2107 and 2114 were ET25...35 mm, and deviations from this characteristic obligated drivers to install additional mudguards on the side parts of the body and change the design of the hubs, making them more durable to avoid deformations.

Varieties

Selecting new wheels for a VAZ 2114 is not an easy task.

When choosing them, it is important to take into account a number of parameters, plus combine them with personal preferences

As for the dimensions, the emphasis should be on the diameter of the hub (58.5 millimeters) and its width (5-6.5 inches). For fastening, standard M12 bolts are used, the thread pitch of which is 1.25 millimeters.

As with most other cars, the VAZ 2114 is offered on the market:

• Steel (stamped);
• Light alloy (divided into forged and cast).

Stamped

Steel wheels are very common. Not surprising, because all “fourteenth” models are equipped as standard with exactly these types of “rollers”. However, they are popular not only because of this. These wheels are cheap, but at the same time reliable and durable.

When impacted, they do not shatter into pieces, unlike some other disc materials. They just get deformed. Such deformations are sometimes removed manually, although the best option is to use special equipment.

But they also have disadvantages, including:

• Large mass, which negatively affects control, fuel consumption and tire wear;
• Weight also affects the chassis and transmission;
• Steel ones extremely rarely have an attractive appearance, which is one of the main reasons for replacing them with analogues.

Cast

Many car owners prefer to use alloy wheels on the VAZ 2114. This is due to a number of advantages that they carry.

1. They have less weight compared to stamped analogues.
2. Helps extend the service life of vehicle components and components.
3. Have a positive effect on reducing fuel consumption.
4. Cools the brake system more effectively.
5. They have a wide range of different designs that can become a real decoration for the entire car. It is enough to put the casting on the car and it will instantly transform. A simple but effective way of external tuning.

As for the disadvantages, they also exist:

• Alloy wheels do not bend under strong impacts, as happens with stamped rollers. The situation is worse - a split is occurring. This leads to increased danger during accidents and high-speed movements;
• The side surfaces begin to oxidize over time. This requires increased attention and periodic maintenance;
• The cost of alloy wheels is noticeably higher than the price of steel counterparts.

Forged

Forged wheels, which are gaining popularity, are also perfect for the domestic modernized “nine” represented by the VAZ 2114.

Strengths include:

1. High level of strength that matches stamped discs and even exceeds them in some places;
2. Lightweight design, which is not inferior to alloy wheels;
3. External attractiveness of forged products;
4. High levels of rigidity and reliability. With strong impacts they bend a little, even less than steel ones;
5. The surface is not very susceptible to corrosion, so you don’t have to care for them as carefully as cast ones.

The only drawback of forged kits is their high price. If your budget allows, and such a purchase is really justified, put your VAZ 2114 on forged wheels.