Wheels for VAZ 2109: size and parameters of alloy wheels for VAZ 21099 r14, r15, r16

Many VAZ-2109 owners, when tuning their car, come to the question of replacing standard wheels with wheels of larger diameter. At the factory, the “nines” are equipped with wheels with a radius of 13 inches and 175/70 tires. Since the tires have a high profile and the size of the wheels is quite small, the aesthetic image of the car is disrupted.

In this regard, there is a desire to install wheels of larger diameter and give your car more style and beauty. Is it possible to install such wheels and how will this affect the driving performance of the car? We will tell you about this in the article.

Are R14 and R15 wheels suitable for VAZ-2109

The good news for tuning fans is the fact that you can easily replace the stock R13 wheels with R14 or even R15. It is only necessary to maintain certain parameters of the disk so that the overall diameter of the wheel allows it to turn freely in the wheel arch.

First of all, you need to select the wheels by width and offset. So the width of the rims should be from 5 to 6 inches, and the offset value should be in the range of 35-40 mm.

It is also worth knowing the size of the holes for the mounting bolts - 4x98 m and the diameter of the central mounting hole - 58.5 mm. Knowing these parameters, you can go in search of disks.

By the way, they can be of completely different types: both forged and cast.

After you decide on the type of disc, you can start choosing tires. An important point mentioned above is that the overall diameter of the wheel should remain approximately the same as that of the stock wheel. Otherwise, there is a risk that the wheel will touch the arch protection or suspension parts when turning.

Video review of installing R14 and R15 wheels on a VAZ-2109:

Wheel diameter calculations

If you have chosen 14-diameter wheels, you can use tires in two sizes: 175/65 and 185/60. These tire sizes have been tested in practice more than once, but if you want to see for yourself the plausibility, you can easily calculate the size yourself. Let's imagine the calculation procedure for a VAZ-2109 with standard 175/70 R13 wheels.

Initial data for calculation: tire width – 175 mm; profile height – 70; diameter - 13 inches. First, multiply the width by the height: 175 * 0.70 = 122.5 mm. Second number: 13 (disc diameter) * 25.4 = 330 mm. The permissible wheel diameter is obtained by adding the disk diameter and the profile height, multiplied by two: 330 + 122.5 * 2 = 575 mm.

You can do the same with larger wheels. So, for example, an R14 with 175/65 tires has a total diameter of 583 mm, and with 185/60 tires – 577 mm. As can be seen from the indicators, 185/60 tires are more consistent with the design of the car, and therefore we recommend using them.

In addition, such tires are wider, which means they have a larger contact area with the road, which increases friction and reduces the braking distance of the car.

Also, wide tires increase the overall handling of the car and reduce the tendency of the tires to break when cornering. Wide tires are not without their disadvantages. These include an increased tendency to hydroplaning and sensitivity to potholes on the road. Which tire to choose is the choice of every car enthusiast.

You may also be interested in: Power relays for a car: how to choose the right relay

Table of typical wheels and tires

You can easily check the confirmation of the above information in the VAZ-2109 instruction manual.

If we talk about even larger wheels (15 inches in diameter), it should be noted that their installation is also possible.

The only difficulty is that the manufacturer does not recommend installing such wheels, as a result of which you may have problems at the inspection station. For R15 wheels, 185/55 and 195/50 wheels are suitable.

However, the latter become almost end-to-end and there is a risk that the wide tires will touch the protection.

Video advice on installing R14 and R15 wheels on a VAZ-2109:

Source: https://avto-cool.com/sovetyi-avtomobilistam/ustanovka-diskov-r14-i-r15-na-vaz-2109

The most famous manufacturers of wheels for the VAZ 2110

It must be said that until today, when the VAZ 2110 was replaced by many more modern models, such as the Lada Vesta, X-Ray, Kalina, Priora and some other cars, the dimensions of the rims have changed little, and the bolt pattern and drilling remained identical. That is why all the rims produced for installation on newer versions are ideal for the “Ten”, with the rare exception when it comes to a model such as the “Niva”. Thus, among the most well-known market participants, the following well-known manufacturers of stamped, cast and forged wheels for this model can be identified:

• The undoubted leader among these enterprises is the Russian concern KiK, which has been producing wheels for Lada and many other brands for a quarter of a century. The peculiarity of the brand is that all light alloy products are produced only in casting with various design options. Any car enthusiast can find among the company’s assortment the entire size range indicated above, and the most popular series of the brand are “Attica”, “Arcade”, “Bering”, “Blade”, “Iguana”, “Mirel” and other models.

R14 wheels for VAZ 2110

• The second equally well-known manufacturer is also domestic, producing sports-style wheels with many curved spokes in various colors, including chrome. The brand is based on the Institute of Light Alloys and has its own technologies and equipment that guarantee ideal quality and reasonable prices.
• The next popular brand based in Russia is SKAD. All products of the Krasnoyarsk plant comply with international standards and work hard for export, and the quality is confirmed by the results of numerous tests, for which there are corresponding certificates. The company's design solutions for disks are offered in a very limited range, but at the same time, the mass nature of the model makes it possible to set a minimum price for them, which cannot but please the consumer. The range of radial sizes for products of this brand varies from R13 to R20.
• , operating in the Russian Federation for almost 30 years, founded by professional racers, produces a huge number of different product options, ranging from the classic 5-spoke design to exclusive wheels. A wide range of sizes allows motorists to choose a product for any purpose, from high-speed driving to off-road driving.
• The last company on the list is the Siberian brand IFree, which entered the market only in 2010, but has managed to gain great popularity. To occupy the desired niche in a period of high competition, manufacturers carefully developed various wheel designs, monitored quality and always tried to reduce the cost of their products. Thus, the brand gained popularity in the first years, and today it only continues to grow, and the manufacturer receives more and more positive reviews from numerous satisfied customers.

You might be interested in Review of wheels for Daewoo Matiz

R15 wheels for VAZ 2110

Important!

The products of all the companies listed above are the most optimal in terms of price/quality ratio, but only on the condition that the car enthusiast purchases an original product from this manufacturer. In all other cases, if the seller tries to sell replicas, their quality, metal strength, geometry and other characteristics may be significantly inferior to the original, which will not only cause discomfort when driving a car, but also pose a danger to the driver.

VAZ 2109 size of rims, tires, wheels, rubber

VAZ 2109 is a 5-door front-wheel drive hatchback produced at the Volzhsky Automobile Plant. In comparison with the “related” VAZ-2108, the model was positioned as more “solid” and intended for a family man, since it was endowed with a less expressive appearance and 5 doors. Due to the characteristic contours of the body, the car was often called a “chisel”.

“Nine” represents class B. The main competitors of the model include Skoda Felicia and Renault 19. The Russian car was inferior to its “classmates” in reliability, but was much more affordable.

The peak of popularity of the VAZ 2109 occurred in the 90s. Then production of the model opened in Belgium and Finland. However, the production of the “nine” soon ceased in these countries. In 2004, the model was discontinued at the Volzhsky Automobile Plant. Until 2011, the VAZ 2109 was produced in Ukraine.

Wheel rims for VAZ 2108, 2109, 21099 cars

• Wheel rims with the following markings are installed on VAZ 2108, 2109, 21099 cars:
• for 13-inch tires 5J-13H2, 5.5J-13H2, 4.5J-13H2;
• for 14-inch tires 5J-14H2, 5.5J-14H2, 6J-14H2.
• Let's decipher this marking in accordance with the size of the disks.
• A – mounting diameter (A – in the image below).
• The mounting diameter is the mounting diameter for a tire, for example 13 or 14 inches.
• B - rim profile width.

Width is the distance between the two flanges of the rim and corresponds to the thickness of the tire. Also indicated in inches.

B – disc offset.

The distance between the axis of symmetry of the disk (dividing it into two equal halves) and the mounting plane of the wheel. In the marking it is designated as ET and measured in millimeters.

1. D – diameter of the central hole of the wheel rim.
2. Measured in mm, designated DIA.
3. D – diameter of the circle where the mounting bolts are located.
4. Measured in mm, designated PCD.

diagram of a wheel rim and its main parameters for VAZ 2108, 2109, 21099 cars
. In addition, the wheel rim may have so-called humps - landing shelves. Humps are ring-shaped projections on disks (along the edges). They are necessary primarily for tubeless tires. For reliable fixation of the tire bead in turns and to prevent depressurization of the tire. There may be only one hump - designation on disk H or two humps - designation H2.

• For example, the designation on a standard wheel rim for a tubeless tire for VAZ 2108, 2109, 21099 5Jx13N2 ET 35 is deciphered as follows: wheel rim 5 inches wide, J profile shape, with a landing diameter of 14 inches, two humps, with a rim offset of 35 mm.
• For all rims (14 and 15) for VAZ 2108, 2109, 21099 vehicles, the size of the central hole will be 53 mm, the diameter of the mounting holes will be 98 mm.
• Notes and additions

- Inch - 2.54 mm. Accordingly, 5 inches is 12.7 cm, 13 inches is 33.02 cm, and 14 inches is 35.56 cm, etc.

— The size of the disc is usually marked on the outside of the disc (see photo at the beginning of the article).

1. More articles on VAZ 2108, 2109, 21099 cars
2. — Choosing winter tires for VAZ 2108, 2109, 21099 cars
3. — High car fuel consumption, reasons
4. — Reasons for increased fuel consumption by car
5. — Problem areas of VAZ 2108, 2109, 21099 car bodies
6. — Setting up the Solex carburetor

What wheels are suitable for VAZ 2108, 2109

Someone once said a long time ago that “discs change everything!” And today this statement is simply undeniable. After all, as soon as you install a modern casting on the most ordinary and dull car, it immediately transforms. It looks completely different: stylish and even expensive.

It would seem that a lot has been said on this topic regarding VAZ cars, but questions still arise, so let’s figure it out together.

What wheels can fit a VAZ 2108?

The main parameter of the wheels is the bolt-to-bolt distance. Due to inheritance with Fiat cars on all VAZs this parameter is 4*98. Also, do not forget about the offset (ET) and hub diameter.

It is worth saying that the 4*98 parameter is not one of the most popular rims in the world. That's why you can safely install any wheels with four bolts and a distance of 98 mm.

Here, anticipating the question, is it possible to install disks with a bolt-to-bolt distance of 4*100, since there are quite a lot of them and they don’t break the bank, it’s worth saying that yes, it’s possible.

But remember that you do this entirely at your own peril and risk. And if you decide to install such car wheels, be sure to use special eccentric bottles.

Many people are also interested in what diameter wheels are suitable for the VAZ 2109. It is worth noting here that the standard ones are R13 and R14. However, for a relatively comfortable ride it can be installed with the R15. True, then you need to take low-profile tires, which is not always good when driving on Ukrainian roads.

Dimensions of wheels and tires for VAZ 2108, 2109 cars

January 6, 2017

Source: https://avtodiski.net.ua/stati/kakie-diski-podhodyat-na-vaz-2108-2109

Freelance options

VAZ-2107 cars are equipped with stamping, which has certain advantages and disadvantages. Stamped discs serve for a long time and reliably, bend and do not burst upon impact, and can be easily repaired even at home. Such models are easy to use, affordable, and do not attract the attention of intruders. However, the relatively large weight increases fuel consumption, makes acceleration and braking difficult, and creates inconvenience during installation and dismantling.

We recommend: Error codes Lada Kalina 1

Innovative light alloy models are divided into 3 categories based on their manufacturing method:

• cast;
• forged;
• prefabricated

Cast ones are made from alloys based on aluminum or magnesium, which allows them to reduce their weight by a third compared to standard versions. The fragility and inelasticity of the material upon impact leads to chips or even bursting of the wheel.

Forged products are distinguished by increased strength and lower density due to hot stamping technology. Deformation requires a lot of force, but the inflexibility of the material forces the suspension to take on the full force of impacts when driving on a bad road.

Prefabricated ones consist of 2-3 segments fastened with bolts. You need to pay special attention to the fastening material Steel bolts rust quickly, titanium bolts do not corrode. Components can be manufactured using different methods and from different materials. This technological solution makes it possible to reduce weight, increase the interchangeability of parts and the maintainability of products.

Is it possible to install R14 wheels on a VAZ-2109 - Autocentre.ua

Useful tips

Is it possible to install R14 (or even larger) wheels on a VAZ-2109? How will this affect the behavior of the car and will there be any problems with the traffic police?

Wheels with a tire diameter of 14 inches can be installed on VAZ Samaras.

But at the same time, other wheel dimensions (width and offset) should not exceed certain values, otherwise, when turning and when the vehicle is maximally loaded, the wheels will touch the wheel arches and suspension elements.

The bottleneck of the VAZ-2108, -09, -099 is the rear arches and suspension, which often “conflict” with oversized wheels.

For Samar, stamped steel wheels with a width of 5 or 5.5 inches with an offset (ET parameter) of 38 - 40 mm are suitable. Light alloy wheels can also be installed.

In this case, the disk width should be 6 inches, and ET should be 33 or 35 mm.

In this case, a tire with a size of 175/65 R14 is used - for example, the same as in the factory equipment of a VAZ-2110 or Skoda Fabia. It is possible to use tires with a width of 165 and 185 mm.

In addition, installation of 15-inch wheels on “nines” and “eights” is allowed - provided that wheels with an ET of 30 - 35 mm are used and with sufficiently low-profile tires 185/55 R15. They also drive V8s with 195/50 R15 wheels. But even more “cool” tires 195/55 R15 and 205/50 R15 are installed only on the front axle or simultaneously with modifications to the suspension or wheel arches.

Based on the operating experience of “re-shod” Samaras, we can say that the recommended tire size for R15 rims is 195/50, and for R14 – 185/60.

Let us also recall that for any VAZ wheels, the diameter of the circle where the four mounting bolts are located (PSD) is 98 mm, which is coded in catalogs as 4x98. The diameter of the central hole in the disks for Togliatti cars should not be less than 58.5 mm.

Installing low-profile tires improves vehicle handling when maneuvering and increases cornering speed. Low tire beads crumple less under lateral loads on the tire, and the steering becomes “sharper” and the car deviates less from the trajectory.

But such wheels absorb road surface defects worse and transfer more shock loads to the body when driving over uneven surfaces.

In addition, a tire with a low profile, even when driving through a pothole at low speed, can easily be “punched” to the disk, the edge of which can become wrinkled until it completely fails.

It is worth noting that traffic regulations prohibit the operation of vehicles with tires whose size “does not correspond to the vehicle model.”

However, the practice of operating tuned VAZs shows that traffic police officers usually have no complaints about 14-inch wheels - obviously due to the fact that the wheels are “14”, similar in chassis to “eights” and “nines”.

What kind of wheels can be installed on a VAZ 2109

b0r0v0k › Blog › What sizes of alloy wheels are suitable for the VAZ 2109

A note to myself for the most part, I’m tired of constantly googling this article, so I’m copy-pasting

Let's face it, the standard VAZ 2109 wheels with a dimension of 175/70 R13 do not look particularly beautiful visually. The point is the large heights of the rubber profile with a visually small diameter of the disc itself.

Therefore, car owners often have a question: is it possible to install wheels of a larger diameter on a VAZ 2109, 14 as it is also called, even 15 inches, without harming the features of the car and undergoing another technical inspection? The answer to this question is available by reading this article.

What is needed, there is an option to install rims for R14 wheels on VAZ 2109, 2108, 21099, 2114, 2115. The characteristics of the disk must be 5, 5.5 or 6 inches wide, and have an offset of 35-40 mm. You can also install cast or forged wheels with the same parameters. Other characteristics of the disks: holes 4x98 mm, central hole diameter at least 58.5 mm.

In this case, you will need to select tires of the appropriate size so that the overall diameter of the wheel remains approximately the same. Otherwise, when turning the wheel, the tire will touch the fender liners or suspension elements, which, of course, we don’t want

Acceptable tire sizes for 14-inch wheels: 175/65 R14 and 185/60 R14. In this case, the 2nd option is better.

We put R14 wheels on VAZ 2108 alloy wheels. Project eight

We put R14 wheels on VAZ alloy wheels

2108. Project Eight Help in developing the channel: Yandex means: .

Winter tires on VAZ-2114

For the most optimal and correct choice of winter tires for 2114, it is important to know what the main differences are, as well as what types of tires there are. According to seasonality, tires are divided into:

• winter;
• summer;
• universal or all-season.

Note!

Universal tires can be manufactured specifically for use in countries with a certain type of climate: warm or cold.

Their physical properties and chemical composition are radically different. Tires for warm countries are not suitable for use in Russian winters, since the temperature at this time is much lower than that allowed by the manufacturer. When driving in Russia, it is better to install tires designed for use in countries with moderate climatic conditions.

An important criterion when choosing is the fact that tires for summer and winter have completely different chemical compositions, which are created specifically for a specific season. When the average outside temperature rises above five degrees, winter tires become very soft, wear out more and are not at all effective. Summer ones harden very much at low temperatures. The correct selection of tires for a specific season is of primary importance.

VAZ-2114 – the front wheel has gone backwards

You need to know the main differences in winter tires, which are divided into three types and have different tread patterns:

• Designed for use in mild winter conditions. Another common name is European. This type of rubber can be used in various conditions: both snow and ice. The tread has a "Christmas tree" pattern;
• Designed for use in severe winters. Some sources call them Scandinavian. Designed for use in very cold conditions with frequent precipitation. Their tread has a pattern in the form of symmetrical diamonds, which are arranged in a checkerboard pattern;
• Studded tires. They give the vehicle the greatest efficiency when operating in icy conditions. They are distinguished by metal spikes inserted into the tread.

You might be interested in this About winter tires on the Lada Largus Cross