How to remove a tape recorder on a viburnum

What kinds of mounts are there for radio tape recorders?

Different manufacturers use different types of fasteners:

Using fixing elements on the side of the device;
Using elastic latches;
Using bolts or screws.

With clamps, a frame is used that is inserted into the “shaft”. The side walls of the car radio have special recesses, and there are tongues on the frame.

To dismantle the head unit you need keys. With them you can easily straighten the tabs or bend them. But this type of fastening has a drawback - the frame can become deformed.

The second type of fastening is more reliable - it involves the use of elastic latches. They can be seen on the side and top walls. These latches fit into special seats in the frame, the simplest and most reliable way to mount the radio.

In some car models, in order to ensure reliable fastening of the multimedia system and to eliminate the risk of failure due to vibrations, installation is carried out to the dashboard, or rather to the power elements. The dashboard is held on the pipe using metal corners. Such fasteners are used in premium cars Mazda and Toyota.

The option of installing a radio in this way is considered additional, but car audio installers often remove the corners, and installation is carried out without fixing elements. This option is not reliable.

Single- or double-din radios are mounted in the dashboard tunnel without any additional fixation. It is customary to mount the device on the center console.

The media system is latched with ordinary plastic latches. This is a screwless fitting - you can see this even on the Lacetti.

With this installation, the radio simply hangs and is not able to withstand even minor shock loads. There are holes on the sides of the device, but most motorists do not know what they are for.

It turns out that these holes are made for reliable installation of the device to the dashboard using corners.

This is a factory fastener that complements the standard fastener.

Rules for choosing an audio system

Before you begin installing the radio on Kalina, you should select it at a car dealership or hardware store. The choice should be approached carefully and carefully. And before going to the store, it is better to decide on your desires and capabilities.

When choosing a radio for your car, you should decide which music media will be used as the main one. This will help you save some money. If, for example, a car owner is sure that he will not need a CD or cassette player, then why should he overpay for a radio with these functions.

For those choosing CD players, there is one minor drawback that manufacturers are trying to combat - the loss of music fragments due to shaking during a trip. But progress does not stand still, and the mechanics are improving. The presence of ISO in the car and, accordingly, in the audio device will simplify the connection. The presence of a USB adapter will allow you to play music from various media.

Pioneer model range

When choosing a car radio, you should pay attention to the power ratings. They have a maximum and minimum threshold. Maximum power is rarely used, except in extreme situations. The choice should be made according to the rated power, that is, the one that is used most often. Manufacturers often indicate only maximum values on packages, so when choosing, you need to carefully study the instructions (passport), and not the box.

Removing the device using standard keys according to the instructions

So, there is a radio and standard keys. But that's not all, you will need an additional tool in the process.

Required Tools

To work you will need:

Keys for dismantling. Depending on the specific model and key manufacturer, there may be 2 or 4;
Knife.

Sequence of removing the car radio from the niche

First of all, remove the front panel, and if necessary, then the decorative parts. On older models, this frame covers the key connectors. This is no longer the case with the new ones.

Then the holes for the keys become visible and easy access to them is provided. The holes can be seen on the side walls of the head unit.

Then the keys are inserted into special grooves - they need to be inserted until they click. In some cases, it may be necessary to force or rock the fixture from side to side. If a click occurs. You can safely pull the radio out of the mine.

If the head unit cannot be removed, it can be screwed to the panel with an additional pin. In this case, it is necessary to remove the dashboard to access the device from the back side.

Video

The video shows in detail the entire process of dismantling the car radio using standard keys.

Removal process using plates

Before you start removing the radio, you need to prepare tools that will help you in this matter. You won't need very many of them. Basically you will need special plates that have hooks on their ends. Often such plates are included with the factory radio, but if they are not available, then do not be upset. After all, such devices can be made with your own hands and in a short time. They are made from frame windshield wipers, and you can simply ask for them at any auto store.

How to remove a radio without keys

The following steps of the procedure:

To begin, insert the first plate into the slot, right under the “Search” button on the radio;
Then we insert the second plate on the other side of the car radio;
Then we pull the radio towards ourselves so that the hooks at the ends of the plate can better catch on to the body itself;
Then we bring both plates to the center of the radio, and at the same moment you need to pull the device towards you.

Often, due to inexperience, there are cases when one or both plates slip off at once. Don't panic, nothing bad happened, you just need to repeat the whole procedure again.

How to remove a radio without keys

A popular option for dismantling standard radios is keys to other devices. You can also remove using plates, rods, mounting tape.

What tools will you need?

To work, you will need two pieces of steel strip 30 cm long and 1 cm wide. You should also use protective gloves. You may need a knife.

Removal process

In case of using steel plates, the steps will be as follows:

First of all, insert the first plate into the key slot on the radio;
Next, insert the second plate;
Two plates are brought towards the center of the device and pull the car radio towards you.

It often happens that an inexperienced car owner cannot pick up the latches the first time. If it doesn’t work, then the procedure should be repeated.

Another popular method is removal with incomplete keys from other devices.

This is done as follows:

They take keys from other devices;
Push it into the hole until it stops;
Move the keys in different directions;
Calmly take out the device.

If you couldn’t find the plates or keys, you can use fountain pen refills—you need four refills.

This method is well suited for foreign cars:

Look for four ballpoint pen refills;
They are inserted around the perimeter of the head unit;
After this manipulation, the radio can be pulled out.

The rods are installed one by one, but the most important thing is that the rods need to be inserted not into the gaps between the dashboard and the device, but into special holes.

It is in these holes that there are latches that will work when you insert any object into them.

You can try the original technology. This method is more applicable for radios with navigators:

Two strips are cut from the mounting tape - width 8 mm, length 10 mm. Tape thickness – no more than 1 mm;
The strips are inserted into the holes until they stop;
Carefully move apart and release the fastening clips;
They take out the radio from their mine, but they can’t let it go.

Important points

Any actions, especially with the use of steel strips and other non-standard tools, should be carried out as carefully as possible.

If the radio is encoded, then there is no need to disconnect the battery terminals before work. When removing a device, it is important not only to get it out, but also not to damage the connectors.

Video

In the video, the author shows popular methods for removing radio tape recorders without special tools. You can see in detail how this is done.

Nuances of installing an audio system

Dismantling of the standard audio system is completed

Without knowing all the intricacies of connecting the radio, it will be impossible to carry out the installation correctly, as a result this will lead to rapid discharge of the battery.

Connect the radio in parallel sequence with the red and yellow wires. This connection allows the system to be turned on and off only using a button on the panel of the device itself. Sometimes the radio circuit is specially designed so that the amplifier is powered in standby mode. Such a system consumes more energy, so the battery drains quickly.

What is the correct installation of a radio? To begin with, you should highlight 4 main wires, each of which has its own color and performs a specific function. The black wire goes to ground, the yellow one provides power to the memory and the audio system itself, the red one provides a signal to turn on the MMC, and the blue one turns on the antenna and other possible devices.

Before connecting, professionals recommend assembling a simple circuit that will allow you to connect the radio through the ignition, due to which the battery will be charged much longer. When working with wires and circuits, you will need to pinout the connector. This will make the circuit easier to work with and understand.

The circuit is assembled in the following order:

two diodes are soldered onto the board - VD1 and VD2;
the red wire is soldered to the VD1 anode;
another red wire is soldered to the cathode of VD1 and VD2;
both blue wires are connected to the VD2 anode.

Read also: Who fills out waybills at the enterprise

The joints can be protected with special cambrics - this will avoid breakdowns.

Before connecting the circuit, you will have to remove the radio and the slide; it is not necessary to remove the console.

All wires must be connected in the correct order:

wire No. 1 is connected to the contact from the rear window heating button;
The 2nd wire is connected to the multimedia system;
wire No. 3 is soldered to blue, which is responsible for turning on the antenna;
The 4th wire is soldered to the blue antenna wire.

The previously assembled board can be secured inside the torpedo with a fixed tie. When connecting all contacts, only the soldering method, insulated with heat shrink, is used. Screwing of wires is excluded. Before starting work, be sure to disconnect the battery.

With this connection, the radio will turn on only when the ignition is turned on, but if it is turned off, it will continue to work until the driver turns it off. Restarting is possible when the car is started again.

Decoding problems

Some manufacturers equip their head units with special protective mechanisms. They operate approximately 10 minutes after the voltage in the on-board network is lost. This is a protective measure designed to protect the radio from being used after theft.

The next time you turn it on, the device will ask the user for a code. If the kit includes a card with a code, then it can be easily entered; if there is no documentation, then decoding is possible using software for a computer or mobile devices. The serial number will be useful for this.

How to remove the center console on Kalina-2

VAZ offers Kalina-2 cars with two interior trim options. The first is used in luxury trim levels (where a media center is installed), the second is an integral part of the “Norma” and “Standard” trim levels. We will talk about what methods exist for dismantling the climate control module panel and the radio panel. Moreover, one of the considered options is suitable for the “Lux” configuration, the other – for more affordable versions (Norma, Standard). The dismantling methods in the two indicated cases are noticeably different. Let's start looking.

How to remove the center console in a luxury package

Let's say it was decided to dismantle the panels located on the center console. You can see that there are two of them. One is the front panel of the air conditioner, the second protects the radio and contains air duct grilles in its design. These two parts are not connected to each other. However, it will not be possible to remove the radio panel unless you first remove the climate control panel. Below it are metric screws (A, B) that secure the media center shield from below.

Central console of Kalina-2, Luxury package

The question arises, why are we even talking about how to dismantle the center console, since after this the car can be removed from warranty? Usually the shield is removed to install additional equipment (for example, a rear view camera). But connecting any equipment, the use of which has not been agreed upon with the dealer, will void the vehicle warranty. If you haven't changed your mind yet, continue reading.

The climate control shield is held in place by 4 clips, which are located on the bottom and top sides of the part closer to the corners. Having disconnected even two clips (1, 2 or 3, 4), you can try to pull the panel towards you to dismantle it. But if you have no experience working with such a mount, it is better not to try - you may scratch the outer surface of the shield. In fact, all you need to do is use a flathead screwdriver (some people use a thin-bladed knife and a screwdriver).

To dismantle the climate control panel, you do not need to first remove the control knobs located on it, if we are talking about the “Lux” package. The same applies to the “Norma with climate control” package. In all other versions, a stove control unit is used, the design of which does not allow removing the shield without first dismantling the handles. Be careful.

If the climate control panel is removed, all that remains is to unscrew two bolts and just as carefully remove the media center panel. Additionally, this part is secured with nine clips:

Two clips are located at the level of the border of the air duct grille;
Three clips on each side board are located at equal distances;
Three more clips can be found on the top side (the windows they fit into are circled in the photo).

Based on the information listed above, you can try to dismantle it yourself, but it is still better to entrust this work to a specialist. It is advisable not to use a hammer, chisel, or grinder when performing any actions, as shown in this video. However, here we are talking about the “Norma” configuration, which we will talk about further.

Removal and installation of DD

Removal

1. Turn off the ignition.

2. Disconnect the wiring harness connector from the sensor.

3. Unscrew the bolt securing the sensor, remove the sensor (wrench 13).

Installation

1. Install the sensor, tighten the bolt to a torque of 11…24 Nm (replaceable head 13, torque wrench).

2. Connect the wiring harness block to the sensor.

To do this, you need to find the book you are interested in and click on the “Buy” button. The price of the book is indicated on the button.

For residents of Ukraine in hryvnias, and for all other countries - dollars.

After clicking on the “BUY” button, a payment window will open where you can select a payment system with which you can pay for the selected book using any bank card (Visa, MasterCard, MIR, etc.)

When you click on the “Pay by bank card” button, the Portmone payment system will open, which is the easiest way to make a payment.

Yandex (payment from any bank cards, Yandex Money account, QIWI Wallet, terminals, etc.);
Portmone (payment from any bank cards, Portmone account);
PayPal (payment from any bank cards, PayPal account);
WebMoney (payment from any bank cards, payment from WebMoney wallets).

Dismantling the console containing the stove control unit

As you know, some trim levels of the Kalina-2 car do not have climate control. Here the driver can only control the operation of the stove. The stove control panel is held in place by 4 clips. In general, the mount used here is the same as in versions with climate control, but you won’t be able to remove the control unit panel unless you first remove the three control knobs.

Let's say we managed to dismantle the stove control unit panel. Then, all that remains is to remove the top flap, which is adjacent to the air ducts. This part itself needs to be pulled towards you from below, but first you need to unscrew two screws (they are circled in the figure). You won’t be able to simply grab and pull out the panel; you need to tighten the side clips with a screwdriver. In fact, the entire process is shown in the video we've posted below.

Any device of standard size 1 DIN can be installed in the compartment intended for the radio. You don't need to dismantle anything to do this. It is difficult to imagine a situation in which it is really necessary to remove the center console panels, if we consider the “Normal” or “Standard” equipment. However, you can use the information provided here. Remember that the owner performs all actions at his own peril and risk.

Multimedia 7″ system on Kalina 2.

On Novaya Kalina there is a new multimedia system with a touch screen and a separate control unit. We first encountered it in the luxury version of the Lada Granta. There it is located a little differently, but has the same screen and functionality. In the second Kalina, the system was equipped with a sun visor. The control unit is located slightly lower, under the air duct deflectors:

Below is a brief guide to the main points of working with this system.

Specifications

Touch Screen Resolution:

800×480

Supported music formats:

MP3, WMA, WAV. If there is accompanying information in the audio file (logo, description), it is also displayed on the screen.

Supported video formats:

WMV with a resolution of 240x320 px. To convert your video files, you can use any available converter. When using an alternative player under WinCE 6.0 (for example, TCMP), it is possible to play common formats, for example *.avi up to HD quality.

Supported photo resolutions:

*.JPEG, *.JPG, *.JPE, *.BMP, *.GIF, *.PNG.

Supported storage media:

SD and SDHC (up to 32GB), USB (up to version 3.0, up to 64GB) with FAT16 or FAT 32 file systems.

How to remove the center console (panel trim)

The photo shows the general diagram of the fastenings of the central panel trim of the new Kalina. in red are clips that simply snap off under force. Blue - fastening screws that should be removed with a screwdriver.

Remove the control unit for the heater and air conditioner by unsnapping the 4 clips around the perimeter;
Remove 2 screws securing the top cover;
Remove the top panel trim by snapping 3 clips on each side;
We remove the overlay from the upper engagement with the panel.

The process of removing the plastic dashboard trim is also shown in the video:

How to remove the radio on Lada Kalina 2

To remove the MMC of the new Kalina, first remove the plastic panel trim (see above), and then remove the fastening screws.

Now you can familiarize yourself with the sticker on which the radio model is indicated, and based on this, select the appropriate firmware. You can also disassemble the MMC to replace the standard amplifier chip with a more powerful analogue. Don't forget that you can connect a rear view camera or amplifier to the standard radio.

Tools:

Small flat screwdriver
Driver for socket attachment
Knob attachment 10 mm

Parts and consumables:

USB car radio Hyundai H-CCR8086

Notes:

The standard radio of the Lada Kalina was not installed in all car configurations. Where there is none, there is a plastic plug pocket (box for things). Connectors with power wires and speaker wires, as well as an antenna wire plug are connected to the box. Below we describe how to install a Lada Kalina car radio with your own hands.

1. Disconnect the wire from the negative terminal of the battery.

2. Using a screwdriver, carefully remove the storage box from the mounting hole.

3. Disconnect the wiring harness connectors and antenna connector from the storage box.

4. Connect the wiring harness connectors and the antenna connector (if provided) to the car radio.

5. Insert the radio into the storage box (until it clicks). Next, on the Lada Kalina, the installation of the radio and its configuration are carried out in accordance with the instructions supplied with it.

The article is missing:

Photo of the instrument
High-quality photos of repairs

Good day, dear Drayvovites! I’m not the only one who is interested in the topic of installing double-din radios in LK2, so, by popular demand, I’m posting a manual on how and why. Photo attached)

So, the other day I finally decided to pick apart the center console. I’ll tell you right away! The plastic, although it seems hard, is actually scratched very well by the tool, and with great effort it is dented! Fortunately, I have an insulated instrument, the insulation softened the load and made it more uniform! So I don’t advise you to pick this whole thing with simple “knives” and screwdrivers with bare “stings”, thank God, I did everything in such a way that there wasn’t even a scratch left, there is one, but it’s behind a plug, in general, little things))

Lada Kalina Hatchback Thrash › Logbook › 2DIN Radio in Kalina-1

The most attentive may have noticed in previous posts that I now have a 2DIN radio.

From the very beginning, from the moment of purchase, I dreamed of a screen in a car, be it a 2DIN radio or a tablet. I looked with envy at the owners of Kalina-2 or Granta, who could install any 2DIN radio without any problems.

The drive is full of recordings of how people make their own consoles for 2DIN, my hands don’t seem to be made of... but since I’ve never dealt with fiberglass and other things, I didn’t want to take it on, it’s unlikely that I would have succeeded in anything normal, but I still want something closer to the factory solution.

The console was covered in Alcantara, the material is of course not for everybody:

After traveling with her a little, I decided that I needed to do something about it. No sooner said than done. Took it off, patched it up, prepared it, painted it. It looks like it turned out okay, almost like the texture of a torpedo. Let's see how it performs in operation.

There were no problems with installing the center console itself; the central air duct was sealed a long time ago because it was not needed. A couple of moments to adjust all this stuff and here it is, 2DIN in its rightful place.

Instead of the old 1DIN radio there is now a pocket

Which, by the way, is very convenient to store your phone or wallet

The first known problem is that the radio does not turn off, that is, the clock is constantly on, which is good.