Instructions and manual for Mystery MAR-818U in Russian

Setting up TV on the Mystery radio


With analog television turned off, you need to configure your televisions to receive digital television.
In order to set up twenty free digital channels, your TV must support the DVB-T2 broadcast format. If your model does not support it, then purchase a digital set-top box to watch digital TV channels. Its cost is about one thousand rubles.

Setting up digital TV

To set up digital channels on the Mystery TV, you need a TV remote control.

Take the remote control and press the SOURCE button to select the desired broadcast format. We find DVB-T2 in the list and confirm, thereby we will switch to the digital TV display mode (in some models this option may not be performed).

  1. Click on the menu button and select the CHANNEL section.
  2. Next, select Auto search and press ok.
  3. If asked to select a country, select Russia.
  4. If you have an older model, you will be asked to choose between DVB-T or DVB-C, select DVB-T to search for terrestrial channels and DVB-C to search for cable TV
  5. Select the channel type DTV or DTV to search only for digital channels, press ok and wait for the setup to complete.

Setting up Satellite TV

New Mystery TV models have a built-in tuner for watching satellite channels.

In order to watch satellite TV, you need to connect and configure the dish. Also, if you want to view paid operators such as MTS TV, Tricolor, NTV+, etc., you need to purchase a CAM module and an access card.

  1. After that, go to the TV settings by selecting the signal source Satellite in advance,
  2. Select the parameters of your satellite.
  3. We start the search and wait for it to finish.

Setting up cable TV

Mystery TVs also offer digital cable TV. To do this, make sure that it has a DVB-C tuner. After all, many cable operators, after switching off analog TV on the air network, retained broadcasting in analog format so as not to lose customers.

  1. We go to the TV menu by pressing the corresponding button on the remote control
  2. To search for cable digital TV, select DVB-C in the settings
  3. Next, you need to select a full search or network if you know the parameters of your provider and confirm all actions.

Also on your TV you can adjust the image quality in the Pictures section, set the time, and adjust the sound. If you have a Mystery Smart TV, you can connect to the Internet via Wi-Fi technology. Basically, all new Mystery Smart TV models run on Android software.

Source

Page 14: Scanning Stored Stations, Automatic Tuning, Radio Control

Attention! The text in this document was automatically recognized. To view the original page, you can use the “Original” mode.

The RDS (Radio Data System) feature is not available in all regions. If the RDS system is not

available in your region, this feature

tion will not work.

Press the MOD button on the front panel

or the MODE button on the remote control so that you

select Radio mode.

Press the P/N /BAND button repeatedly

remote control or the BND button on the front panel to select the required frequency range: FM1, FM2, FM3, AM1, AM2.

The following data will appear on the display:

band, frequency and station number (if this frequency is previously stored in memory

Manual setting: Press one of the buttons

UP/DN on the front panel or Y/R on the remote control, while the setting frequency

will increase/decrease by one step per

Automatic setting: Press and hold the UP/DN button on the front

panels or f/r on the remote control more than 2

Manual

Page 4

  • Image
  • Text

-4-

MANUAL

- If the driver is distracted

monitor while driving, this may lead to loss of control over the driving situation and ultimately cause an accident.

— If the parking brake is not activated,

PARKING BRAKE will flash on the display and images will not be viewable. This warning will only appear if the parking brake wire is connected to the vehicle's built-in parking brake system (see Connections section).

— When listening to audio programs in

When driving, set the volume level at a level that will not interfere with the driver’s ability to hear everything that is happening around the vehicle.

- Do not perform any actions on

control the device while the vehicle is moving, if this distracts the driver from control.

— To reduce the risk of fire

device or electric shock, do not leave the player in the rain or in areas with high humidity.

— Do not expose the device to

sudden change in temperature. This may cause condensation to form inside the device and cause damage to the device. If condensation occurs, wait 1 hour for the moisture to evaporate before using the appliance. Condensation on the elements is not allowed. Do not operate the device in dusty places.

— Do not turn on the device if the temperature

tour inside the car is higher or lower than normal. Before turning on, wait until the interior temperature is normal. Operating temperature range: from 0° to +40° C. Condensation on the elements is not allowed.

— To avoid damage, do not expose

expose the receiver to direct sunlight

light rays, thermal radiation or hot air currents.

— To reduce the risk of fire

device or electric shock, use only recommended components.

- To avoid an accident, do not

try to disassemble the device. Do not modify or repair the device yourself. This can cause serious damage and voids the warranty for free repair of the device. Repairs should only be carried out at specialized authorized service centers.

LCD screen

Press the LCD touch screen gently so as not to distort the image or interfere with the normal operation of the device. The image may become unclear or the LCD screen may be damaged.

Cleaning the front panel and LCD screen

— Clean the LCD screen with a slightly damp

soft cloth.

- Do not use products such as ben-

zine, solvent, special products or antistatic sprays.

— Do not use alcohol to clean the screen.

If the vehicle is parked in a cold or hot place, the display may not be clear. This does not indicate a malfunction of the player. Once the temperature inside the car returns to normal, the image will become clear.

Types and models

Mystery car radios are in demand in the automotive market. Some models will be discussed below.

MDD 6270NV

This model is a radio in a stylish case with a touch screen. One of the advantages is simplicity and ease of use. The kit includes a head unit, a powerful antenna, a GPS navigator, and a TV tuner. To make it more convenient for the driver to control the device, control buttons can be installed on the steering wheel.

  • support for various devices, which allows you to listen to music from memory cards, play videos from CDs, etc.;
  • for connecting devices, the radio is equipped with a USB port;
  • An additional video input is provided, which makes it possible to connect a rearview camera;
  • affordable price.

MMD 6220S

Externally, the receiver looks attractive, the size is 2 din. The screen is 6.2 inches, with switch buttons on the sides. The volume is changed using a knob, a similar switch for searching by radio frequency. There is a color backlight that can be changed. The choice of colors is quite wide. The appearance can be changed by selecting a picture of the car brand as the screen saver.

The radio is equipped with connectors for a rear view camera, a sambufer, a TV antenna, for reading SD memory cards, as well as a USB port and connector. The controls are simple. The time and date are displayed on the screen. At the bottom there is a button to switch the device to night mode. The device is equipped with an equalizer and a good radio receiver. It is possible to play CDs and DVDs.

MDD 7120S

The Mystery MDD 7120S car radio has a 7-inch diagonal LCD touch screen with high image quality. This model is a universal device capable of reading information in different formats and media (CD/DVD/MP3/USB). On the front panel there is a port for USB and SD cards (video by Serega Soviet).

Advantages of the 7120s model:

  • standard 2 din size allows installation on cars manufactured after 2007;
  • output power 4x50 W;
  • the device is equipped with a built-in TV tuner that supports standards: PAL, SECAM and NTSC;
  • You can install controls on the steering wheel
  • the radio transmitter operates on VHF, FM and AM waves;
  • On the back there is an input for a rearview camera and AV.

The radio comes with a remote control.

MDD 4310S

The model is equipped with a full-color display. Screen size 6.2 inches. Rich colors and high sensitivity allow you to watch movies and videos in good quality. The monitor clearly displays a map of the area. The powerful antenna included in the kit receives high-quality signals regardless of the location of the car.

The radio has the following technical characteristics:

  • equipped with a GPS navigator;
  • power is 50 W;
  • device size - 2 din;
  • touch screen size – 6.2 inches;
  • supports a wide range of radio frequencies;
  • allows you to play audio formats – MP3, WMA;
  • It is possible to view video in MPEG4 format.

Specifications

The radio has the following parameters:

  • voltage - 11-14 V;
  • presence of an amplifier - yes;
  • power - 4*50 W;
  • frequency range when playing from removable media - 20-20000 Hz;
  • number of memory cells for VHF stations - 18;
  • case size - 1 Din.

To adjust the sound level, a rotary handle is used, which does not have travel end stops. The control buttons are located on the panel; there is an additional remote control for signal transmission. The Mystery MAR-919U car radio is equipped with a removable front panel; when the contacts are opened, the signal indicator with a green filter is automatically activated. On the front panel there is a liquid crystal monochrome segment display, which displays the clock and operating status of the head unit.

Possible malfunctions and ways to eliminate them

Like any device, the radio may have malfunctions.

MalfunctionCauseRemedy
The device does not turn onIncorrect connection, fuse has blown.Check that the connection is correct and replace the fuse.
No sound even though the device is turned onThe speakers are not connected correctly, the connecting wires are damaged, or exposed wires are touching the chassis or other wires.Check whether the speakers are connected correctly, check the integrity of the wiring, replace damaged areas.
There is sound, but no pictureThe parking brake wire is not connected or the parking brake is not activated.Apply the parking brake.
The fuse blowsThe wires are touching the frame and the fuse is installed with the wrong rating.Check the wires, install a fuse with the required rating.
DVD won't playThe disk is damaged.Check the disc surface.
The sound is interruptedThe disk is dirty, the device is not securely fastened.Wipe the disc with a soft cloth and secure the device.
The remote control does not workThe batteries are dead or damaged.Replace power supplies.
The screen displays ERR-DISCThe disc is installed incorrectly, focusing error.Install the disk correctly, press EJECT or RESET.
Region Code error appears on the monitorInvalid country code.You can only use discs with o or "1".
The monitor does not turn on/offThe monitor is not centered and there is an obstacle in front of the front panel.Remove the obstacle and rotate the display left and right.

Compatibility with other devices

The MAR-919U player is compatible only with external USB drives and SD cards. The volume of devices should not exceed 2 GB, the number of files should not exceed 500.

According to the instruction manual, support for external hard drives is not guaranteed. The user can connect compact MP3 or WMA file players via the AUX port. Playback control is carried out by push-button switches located on the player body.

Connection diagram

The drives are inserted into a USB connector, the user can connect an extension cable to which the devices are connected. To use an SD memory card, you need to fold down the front panel and place the part in the slot.

The drive is held in place by an automatic spring lock. To remove, you need to gently press on the visible end part, and then remove the card from the slot. Additional players are connected using a 3-pin cable, the plug of which is installed in the AUX socket.

Rating
( 1 rating, average 4 out of 5 )
Did you like the article? Share with friends:
For any suggestions regarding the site: [email protected]