The car of the domestic manufacturer Lada Priora station wagon has an attractive appearance, and its interior is practically in no way inferior to budget foreign cars. In terms of technical characteristics, Lada is also at a fairly high level.
But for Russian motorists, the factory equipment of a car is often not enough. Many owners of the Lada Priora station wagon decide to tune the car. For some it will be cosmetic tuning, while others will dare to improve the already good technical characteristics of the car, which will allow it to become fast and easy to control on the road.
The production of the Lada Priora led to the emergence of a new direction in tuning, the goal of which is to turn a well-known inexpensive car into an attractive car, not inferior in appearance and technical characteristics to foreign cars.
Tuning Ladas are divided into:
- Improving and changing the appearance of the car.
- Increasing comfort and equipment in the cabin.
- Improving the technical characteristics of the car: engine, carburetor, chassis.
So, let's look at each type of tuning of the Lada station wagon in more detail.
Improving and changing the appearance of the car
The Lada Priora station wagon is a fairly attractive car, but many of its owners seek to change the radiator grille to give it a sportier look.
The grid can be updated in the following ways:
- changing the radiator grille without replacing the front bumper;
- changing the radiator grille along with the front bumper.
The first option is not capable of transforming the car to such an extent that it is not recognized as a Lada Priora. However, this method is considered the most economical option.
The second tuning option is less economical, but it allows you to transform the car beyond recognition, as well as give it solidity.
If you change the appearance of the car, you can also modify the headlights. Installing eyelashes and tinting the taillights will make the car unique. And changing the lamp dimensions installed during the factory assembly of the car to LEDs will not only make the appearance of the car more attractive, but will also enhance the glow while driving.
Many car owners install beautiful wheels, which help transform their car before their eyes.
Sometimes car owners try to tint the windows themselves, but this is unreasonable on their part. After all, this work requires special skills, so it would be advisable to entrust it to a specialist, otherwise minor tinting defects are possible.
Changes under the hood
With the right approach, you can increase engine power by 40% . Installing a mechanical supercharger (supercharger compressor), boring cylinder blocks, replacing pistons with low ones and the crankshaft with high ones will help make the car faster, but will require more fuel consumption.
Improved dynamic characteristics are achieved by working with the carburetor . Rub the parts of the disassembled carburetor with sandpaper and blow out the channels, change the jet and acceleration pump, adjust the fuel level - and the Lada Priora will increase its acceleration speed. And a double-diaphragm vacuum booster, cermet discs and new springs can improve the braking system.
No one is immune from battery discharge at the most inopportune moment. Read→ how to quickly charge a car battery in any conditions.
If you know how to draw, you can easily make your car unique. Our article on airbrushing will help you with this!
How to avoid fines for tinting? Do not come here -→ /avtopravo/strafe/kakojj-shtraf-za-tonirovku.html if you do not have a tinted car.
Tuning the interior of Lada station wagon
Poor noise insulation and vibrations in the cabin are recognized as a problem for any Russian-made car.
Therefore, reducing noise in a car is one of the important stages on the path to comfort. A wide selection of high-quality materials for this procedure will solve the problem without much effort. After good sound insulation has been installed in the car, you should examine the fastening of the upholstery and plastic in order to prevent “crickets” in the car. Each owner approaches tuning the Priora’s interior creatively, because he knows what he needs in order to feel cozy and comfortable in it.
Bumper tuning
Many body kits that can now be found on the market for the Lada Priora are sold individually, that is, you do not need to take the entire set and you can save money on this. To give the car an aesthetically complete look, you only need bumpers.
- Sniper series bumpers were confidently used on the Grant model, but on the Priora they look no worse. The bumpers are placed on standard car mounts, and the work can be done independently. The bumper material is ABS plastic, lightweight series, can withstand a variety of external factors from severe temperature changes to exposure to oils, gasoline, solvents, alkalis and salts, which is especially beneficial in the winter season. The front bumper already has a hidden cutout for a tow rope.
- The AVR series bumpers have the same characteristics as those of the Sniper, but can be custom-made to match the color of the car, which already eliminates a number of problems. The material of the body kit is fiberglass, which can also withstand many external and mechanical damage factors, but weighs a little more.
- The “I am a robot” bumper is made of lightweight plastic, has a smooth and clear shape structure, and can be installed on standard mounts. Does not require additional intervention to create seats. Solves problems with engine cooling due to a wide air intake and an already built-in radiator grille.
- There are special covers for the standard rear and front bumpers that do not require replacing the body kit, but add and almost completely change the appearance of the car. As a rule, the standard material for such linings is ABC plastic. Front bumper skirts prevent dirt and dust from getting into the radiator grille and directly onto the bumper itself.
Tuning the technical part of Lada Priora
This type of car tuning is the most difficult, so if necessary, it is better to entrust this difficult task to specialists.
Correctly done technical tuning of the Priora will make it possible to significantly increase engine power. This will have a positive effect on the endurance of the car, as well as on its speed on the road.
Car enthusiasts first improve engine performance by:
- increasing the volume of the unit;
- installing a lightweight flywheel;
- installing a filter with zero resistance;
- equipping the engine with turbocharging.
It is also worth knowing that a supercharger compressor will be an excellent replacement for turbocharging. The installation procedure will cost you much less.
In addition, you can install a forward flow, an equal-length exhaust manifold, as well as other necessary parts.
Good tuning of a Priora car includes, among other things, improving stability and maneuverability on the road. To achieve these goals, owners can install sports springs, stiffer shock absorbers and equip the car with reinforced strut supports.
So, we can conclude that there are a huge number of ways to tune a Lada Priora station wagon. Every car enthusiast chooses the appropriate option for himself. Now, in order to get acquainted with existing car tuning kits, you just need to have access to the Internet and a computer.
Lada Priora did not receive its name immediately, but only in 2004. In total, about 60 names were proposed for the VAZ 2170. Based on the results of surveys in various cities of Russia, seven of them were selected, and the result was something that became known to everyone. There is no official decoding, we only know that in Latin “prior” means first, senior.
What is Lada Priora? This car borrowed a lot of ideas from the previous AvtoVAZ model - the VAZ 2110. In other words, the Priora is a deep restyling of the “tens”. This is the first AvtoVAZ model to receive airbags and a seat belt pretensioner.
Significant differences appeared after restyling in 2013, when the Priora’s interior changed greatly. Due to the appearance of Vesta at the beginning of 2016, sales of the station wagon and hatchback stopped, and the Priora sedan was transferred to the line of budget cars. Despite this, it is in good demand.
The Priora, like the VAZ of the tenth family, has great potential for improvements. Many shortcomings are eliminated using methods already familiar from the previous model. And if you additionally work on improving (tuning) the interior, engine and exterior, then the Priora will be more powerful, comfortable and stylish at a low price.
The following is a list of keywords that combine articles from general categories: DIY repair or tuning, tests and reviews, as well as the best spare parts and technical fluids.
Tuning the front panel of Priora
Tuning the front instrument panel may not add shine to the car, since it is least noticeable even to passengers, but still, the driver himself will be much more pleasant to observe the speed and revolutions on the new panel. The trouble is that doing tuning with your own hands in this case is practically impossible. Often panels are either made to order or ready-made kits are purchased. A unique change to the model of the front panel with your own hands can only be attributed to the work of installing LEDs. They can be very helpful at night, since the light on the Lada Priora on the panel itself is dim, and seeing something is a problem. Diodes can help improve beauty, but the main thing is not to overdo it, as they can also interfere. With a large number of LEDs installed on the front panel, the light from them at night begins to confuse the driver.
With plastic in the car everything is much simpler. The handles, front panel, and all other plastic can be modified in color, partially or completely. The contrast of black and metallic colors will look much better on the Lada Priora. You can tune plastic panels yourself using a regular aerosol can and plastic sealant. Work is carried out in a well-ventilated area and without temperature changes, so that the paint dries quickly and evenly.
It is also possible to buy new plastic and replace the old one with it, thereby changing not only the color, but also the shape, but as practice says, there are few such parts on the Lada Priora, but you can borrow parts from the Grant or Kalina models, where plastic parts and their mounts are similar to Priora.
This is interesting: Penalty for driving without insurance
Do-it-yourself technical tuning of the Lada Priora car interior and photos of implemented options
A large field for experiments in the field of individual auto tuning is provided by RGB strips complete with drivers. The bright footlights for the front passenger and driver look good. Due to the control driver, the lighting intensity and color are adjusted. Is there any rational grain in this revision? Without fanaticism, such illumination will help you get out in the dark, but otherwise...
Audio tuning VAZ-2170
The standard VAZ audio system, as our audiophiles assure, does not meet high sound standards. Seriously, this is the case, and it would be nice to increase the diameter and install branded speakers by 16 cm. In some photos of tuning the interior of a Priora car with your own hands, you can see that the seat for the speakers in the doors will have to be cut. It is imperative to perform noise and vibration insulation of the door walls to avoid resonance phenomena in the future.
Headlight tuning
A rather old way of improving turn signals on the Lada Priora, namely by making them larger. The improvement implies that the collars act in two functions at once. This can be done by replacing the LED lamp with two contacts of the standard version with a lamp of three contacts and connecting it to the main dimensions. After this implementation, the turn signals will turn on when a voltage of 5W is applied to the filament, and the dimensions will respond at a voltage of 25W.
Recently, many have started tinting taillights to make the car unique, and while in America yellow vinyl is often used, in the CIS countries they prefer red. Vinyl can be applied to the headlights without removing them, but for best quality, removal is recommended.
Eyelashes on headlights have long become relevant as car decorations. You can make your own eyelashes using blanks and vinyl film. The workpiece is covered with film and glued into place using sealant and using a soap solution for degreasing, but the main thing is to make sure that no water remains. You can buy ready-made eyelashes, especially since there are many models on the car market. Their installation is similar to the first option, namely with a sealant, but you can also use double-sided tape, but it is usually unreliable and the cilia can fly off during the next wash.
Lenses can help improve both the beauty and the glow of your car's headlights. The xenon included in the lenses will give a pleasant blue light and perfectly illuminate the road. Installation does not require any extra work, except for a small boring of the entrance for the large diameter of the lens.
The dimensions on the Lada Priora from the factory have a big drawback in the glow of the dimensions, which gives off a dull yellow color. This, as a rule, can be corrected by replacing a regular lamp with an LED, but the lamp in the headlight is without a socket, so an LED replacement must also be looked for without a socket
When using an LED lamp with one diode, only the light will change, which will acquire a white tint, but the quality itself will not change, so it is recommended to pay attention to 9-diode lamps
Decor of plastic components
The sedan is equipped with a lot of plastic parts in the interior; fortunately, many of them have light colors and can be easily repainted. The process requires not only a respirator and gloves, but also a degreasing liquid and primer. During operation, it is important to prevent the formation of drips.
Another way to improve the appearance of plastic elements is to cover them with carbon film. According to many car enthusiasts, this material is durable and looks impressive. The blanks are cut with a margin of 20-25 mm at the edges, after which the film is glued to a degreased surface. Edges and curves are blow-dried to prevent kinks and kinks.
Following the Lada Priora sedan, which replaced the models of the 10th family, AvtoVAZ also released models based on this car with other body types - hatchback and station wagon. Moreover, the latter turned out to be the most successful modification in this family. But these models are serial, therefore they are of the same type, and do not stand out in the general stream. Therefore, many owners of the Priora station wagon decide to carry out tuning in order to highlight their car and make it different from others.
Lada Priora interior reupholstery. Types of materials and practical tips
The interior of the Lada Priora is classically upholstered in leather or leatherette.
Interior refurbishment
The latter today is manufactured using technologies that make it practically impossible to distinguish between natural and artificial materials without carefully studying them. High-quality leatherette has the following advantages:
- does not stretch or wear out like natural leather over time;
- does not absorb unpleasant odors and is easy to dry clean;
- has a huge number of designer textured coatings;
- resistant to solar radiation;
- compares favorably in price compared to genuine leather.
Another interesting option for finishing the interior is to cover it with carbon film. In addition to the material itself, you will need a degreaser and an industrial hair dryer for high-quality gluing of vinyl film on curved surfaces. This method looks even simpler and more profitable even than leatherette, but in the first place, the aesthetic appeal of this or that material comes first from the point of view of the driver’s taste.
The roof of the car, door panels and part of the dashboard can be covered with Alcantara no less effectively. This extremely popular synthetic material, strongly reminiscent of suede, is actively used not only in auto tuning, but also as a finishing cut when creating the interior of houses, yachts, etc. Its range also pleases with its diversity, and therefore even the most experienced Lada Priora driver will be able to choose something for himself.
A little information
The history of this family of passenger cars began in 2009, when the first sedan, designated 2170, rolled off the assembly line. Following it, a year later, a station wagon appeared, which was labeled as 2171, as well as a hatchback 2172. But as already noted, the largest Among these three cars, the station wagon gained popularity.
In the process of creating these cars, the designers used previously well-proven components and assemblies. The same components of the car that caused criticism were replaced. In general, Priora received more than 200 new elements and components that had not previously been used on VAZ cars. The creators did a good job with the interior of the car and its exterior.
As for the characteristics of the Lada Priora station wagon, these cars received quite reliable naturally aspirated 1.6-liter engines, with a 16-valve timing belt, producing 96 hp. With. This engine allows you to accelerate the car to a maximum of 183 km/h. At the same time, the fuel consumption of the Priora station wagon in city conditions is 9.8 liters, while on the highway consumption drops to 5.6 liters.
We improve technical indicators
The Priora station wagon model is already quite well equipped from the factory, which makes it a completely modern car. We are talking about standard equipment of cars with parking sensors, all kinds of sensors, airbags, automatically controlled optics and much more. The designers also announced a possible increase in the power of the power plant, but it is unknown when the new engine will appear. Those who don’t want to wait for an update to this car do tuning the Priora station wagon with their own hands to improve the car’s performance.
It is best to start tuning a Priora station wagon with the technical component. Making a number of design changes can improve the engine performance quite well. But carrying out such modifications is a costly and time-consuming task. But such tuning Priors can “boast” of an engine with increased volume and, accordingly, power.
The essence of engine modification is to increase the volume of the cylinder by boring them. Together with the block, its head is also being modified, in which the cross-section of the windows has to be increased, followed by grinding. In addition, when assembling the power unit, it is recommended to use tuning and lightweight components - valves, flywheel, intake and exhaust manifolds, etc.
It’s worth starting tuning a Lada Priora station wagon from the engine, if only because this is the most difficult part of modifying the car. And if you managed to improve the engine, other types of improvements are already easier to carry out.
If you take the transmission, it does not require any special modifications. One of the options for improving this part of the car is to install a short-stroke rocker on the gearbox, as well as install self-locking differentials in the drive. In general, the tuning of the transmission can be considered complete.
A little on the suspension. In the factory version, the ground clearance allows this car to be driven on any road. But many car owners, in the process of modifications, lower the car by shortening the suspension springs, but it is better not to do this. On the contrary, to increase the load capacity and ensure good cross-country ability, it is better to increase the ground clearance of the Priora station wagon, for which special spacers are used in the suspension struts.
Gadgets
Automotive electronics is developing by leaps and bounds. More and more new gadgets are appearing on sale, designed to improve the driving process itself. But in reality, sometimes we see the opposite. So don't get carried away. Try to get by with only the most important and necessary things that really improve the quality of your ride.
These necessary things probably include a good on-board computer, a powerful multimedia system, high-quality sound from speakers, a video recorder, and climate control.
Improve performance:
It may also be a good idea to flash the engine, install a compressor, rework the crankshaft, strengthen the transmission, install a spider for a smoother exhaust, and strengthen the brakes. Here everyone already makes modifications to the Lada Priora with their own hands, based on the available funds, skills and strength.
Chip tuning
After reworking the power plant, you will definitely have to do chip tuning in order to adjust the operation of the power and ignition systems to the new conditions.
It is noteworthy that chip tuning is also quite applicable for cars that do not have any design changes to the engine. Reflashing the control unit will improve the dynamic and power performance of the car (by about 15%). At the same time, the costs for such tuning will be minimal, since nothing needs to be altered in the engine for this.
But it is worth noting that it is better to entrust chip tuning to professionals who know exactly how everything is done, otherwise the result may be completely opposite.
We change the exterior and interior
Having finished with the technical part, you can begin external tuning of the Priora. We will not consider such an option as using stickers, since it often looks just ridiculous.
To change the appearance of this car, it is better to use a body kit on a Priora station wagon. By installing tuning attachments - bumpers, door sills and door sills, deflectors or air intakes on the hood, you can significantly improve the appearance of the car. But you should approach the choice of a set of Priora body kits seriously, so that the overlays do not affect the driving performance of the car, primarily the ground clearance.
Priora is a passenger car with a universal body. It is produced in Russia. This is an improved and updated model of all cars of this model. The body has a classic appearance; there are special brackets on the back for securing the cargo.
There are five seats in the cabin, the rear ones can be removed if desired. The trunk is large and roomy. Power is ninety-eight horsepower, which allows for stable driving on local and city roads. The seating position is high enough, so bumps and unevenness are not a problem.
The appearance of this car is no different from other brands, so many owners carry out tuning. It helps the car acquire a completely new look, making it unique and beautiful. A tuned car will always receive great attention and interest. In car dealerships, this work is expensive, which is why we will consider changes that you can do yourself.
Chip tuning
does not affect the external characteristics of the car, but is only aimed at improving the sound quality of the engine, idle speed, and fuel consumption will become much less.
On video chip tuning of the Lada Priora engine:
But what may be the signs of a malfunction of the fuel pressure regulator in a Priora car, this will help you understand
Use of spoilers and body kit
includes installation of the following spare parts: front and rear bumpers, side parts, deflectors and cilia and others. All these details make the car more expressive and stand out. The car takes on a special character and style.
Optics tuning
- this is the use of films for tinting, LED strips and boards, modules and sets of tuned headlights. All these parts do not in any way affect the level of light transmission, but only serve as a decorative element. Lighting fixtures will work the same as before.
On video tuning of Lada Priora optics:
But how tuning a VAZ Priora sedan is carried out is described in great detail in this
Alloy wheels
- This is the most common type of tuning that many people use. The use of special and unique discs not only looks beautiful, but also brings a lot of benefits. The performance of the car improves, and fuel consumption, on the contrary, is reduced to a minimum.
In the photo there is a priors station wagon tuning:
Tuning the interior
is simply necessary for every driver, because this is where they spend a lot of time. This work primarily involves changing the covers. In the new improved version, you can use artificial or natural leather, as well as eco-leather. The steering wheel pad with buttons for controlling the multimedia player helps you not to be distracted from the road while driving.
Car mats, pedal covers and much more can also be replaced with completely new ones.
On the video tuning of Priors station wagon:
Interior tuning of Lada Priora sedan in the photo: main directions
Many motorists already have an idea of how to organize the modernization of the chassis or power plant. For example, some owners successfully installed daytime running lights on the VAZ-2170, which increased not only the level of exterior appearance, but also safety.
There are many opinions regarding interior design. Some particularly “spiritualized” individuals manage to change their internal environment beyond recognition. Such Priora and do-it-yourself interior tuning in the photo look, in their opinion, like the dream of an Arab sheikh. However, there are quite reasonable options, including:
- Replacement of covers and trim.
- Modernization of seats and dashboard.
- Acoustic noise insulation and installation of a powerful audio system.
- Interior lighting tuning and painting of standard plastic elements.
When looking through the options, we must not forget that even for a substantial amount of money, the VAZ environment cannot turn into a Mercedes one. Therefore, you should plan modernization without much fanaticism; do everything modestly, but with taste.
Options for upgrading the VAZ-2170 dashboard
The dashboard of the Lada Priora sedan and the tuning in the photo looks quite decent, and even moreover, it is justified, since the factory lighting of the devices is not enough for many. There are several implementation options:
- Disassemble the panel and remove the standard coating from the lining numbers. After this, the signs on the shield will acquire a bright white glow.
- Stick red or any other inserts on the back of the glass for certain numbers. This focuses attention on the temperature scale and speedometer.
- Attach pieces of LED strip of certain sizes to the back side of the glass on the dashboard board. It is important to observe polarity when connecting the circuit to standard wiring.
What else can be done? VAZ 2170 owners can only dream of a full-fledged HUD projection screen , but something can be done. If you don’t like the green color of the display, you should disassemble it and remove the filter. This will make the backlight bright white, but you can install any other filter.
Some fans of tuning, at the same time as the general illumination of the instruments, also change the illumination of the speedometer needle. To implement this project, 10 SMD LEDs are sufficient: four to illuminate the tachometer and speedometer, and three each for the fuel consumption and coolant temperature scales.
How to soundproof the interior ceiling?
Another useful upgrade, because the acoustic comfort of the VAZ-2170 leaves much to be desired. High-quality sound insulation on the Lada Priora in the form of tuning the interior with your own hands may not be visible in the photo, so we will consider the issue in more detail. Craftsmen recommend starting from the ceiling; for work you will need 4-5 hours of free time and materials:
- Two sheets of splen 1.20 x 1.0 m, 4 mm thick.
- Two sheets of bitoplast.
- Three sheets of vibration damper.
- Mounting roller.
- Stationery knife and scissors.
The procedure begins with the dismantling of the ceiling cladding and standard sound insulation, after which the roof surface is degreased and vibrating material is laid as the first layer. The second stage is the installation of splen sheets, and only then – laying the bitoplast. The convenience lies in the fact that the sheets of material have an adhesive base, which needs to be heated with a hair dryer and “rolled out” with a roller.
Soundproofing the glove compartment and doors would be a good idea. The materials you will need are the same as for working with the ceiling; the technology is simple and quite accessible to anyone. It should be noted not only the improvement in acoustic comfort, but also the thermal insulation characteristics of the car.
Refinement of the interior lamp
Almost all available reviews from Lada Priora owners indicate that the standard navigation lamp does not provide good interior illumination. There are several practice-tested methods:
- Installation of a self-made platform according to the size of the lampshade, onto which the LED strip is glued. The wires are connected to the standard wiring.
- Replacing the stock ceiling lamp with an LED one.
- Replacing the standard lamp of a lamp with a module of LEDs, the brightness depends on the type and number of light elements in the block.
The last two tuning options for the domestic Lada Priora sedan are not noticeable in the photo, but this does not mean that they are ineffective. Modernization is simple, since you do not need to completely remove the lampshade, and does not require special devices and tools.
Upgrading seats
It is possible to radically transform the interior at minimal cost by changing car covers, which are sold in huge quantities. Leather products will cost a little more, but whether they make sense is up to the owner to decide. An alternative can be eco-leather, which has good breathability.
What is needed to improve a car?
- Chip tuning
is just about installing the necessary programs. To do this, you need to know various resources well or have a familiar programmer. - Body kits and spoilers
are installed using double-sided tape or self-tapping screws; you will also need a drill to make the cuts. Well, you also need the spare parts themselves: spoilers on the edges and body kits on the front part. - Optical tuning
can be done using eyelashes, LED strips, and tint films. For installation you need the materials themselves and a soft cloth. - Alloy wheels are installed in the same way as regular ones
. In order to exchange old ones for new ones, you need wrenches of the right size and a jack. - No tools are needed to tune the interior
. It is only important to buy covers, remove the old ones and install new ones. You can also put updated floor mats. And for the steering wheel, you can buy a special device that will help you switch music and fully control the player even while driving.
External tuning of Lada Priora:
Body tuning
First of all, it’s worth tackling the Priora’s hood, which often has an incorrect position and is crooked, which disrupts the sound insulation when the car is moving. You can solve this problem yourself by replacing it with double-sided universal hood stops.
The next step is to improve the sound insulation of the doors by placing special noise and vibration-absorbing materials in their cavity, as well as replacing the standard locks with new ones with improved vibration-absorbing properties.
To protect and decorate the body, a vinyl base or carbon film is used, which is ideal for external restyling of the Priora. It can be used both as a pasting for individual car parts and as a stylish design on the hood or doors. There is also a large selection of films known as chrome base, which imitate metallic finish and highlight the prominent lines of the car.
Individuality for a sedan can also be achieved by applying a stylish airbrush design, but this will require a lot of money. A separate part of the Priora restyling is the installation of a spoiler, which improves aerodynamic properties and stylishly complements the appearance of the Lada Priora sedan.
Tuning the standard muffler by replacing it with a new one with a double outlet will give the car an aggressive and powerful look.
Chassis tuning
The performance quality of the Lada Priora chassis can be improved using a double-diaphragm vacuum booster, which increases the reliability of the brakes by 2 times.
It is also recommended to install discs with a metal-ceramic coating and stiffer springs in the clutch basket. This is an important safety issue while increasing the power of the car's engine.
