Installing lenses in VAZ 2109 headlights

Why are they needed?

Now lenses are installed in headlights for several reasons, and they do not always come from the factory:

• Purely tuning . Many people like the appearance; often such lenses also have “angel eyes”, an LED rim around the lens. It should be noted that they are often installed on halogen lamps.

• Installed together with xenon lamps . If you install xenon at certified stations, then it is supplied only with lenses; this is done for several reasons (more on this below)
• Standard installation from the factory . Here the lenses are factory installed; as a rule, these are either expensive models (or configurations). And the headlights in such cars are already a whole computer; they have a lot of functions, including cornering lighting.

What I would like to note is that now mass installation is dictated by tuners, that is, the appearance and installation of xenon lamps is banal. However, now I would like to understand each point in more detail.

Choosing high-quality optics for the VAZ-2109

Doing it right: adjusting the valves of the VAZ-2109

Modern headlights on the VAZ-2109 are very diverse, and it can be difficult to evaluate quality, appearance and their ratio to cost at the same time

It doesn’t matter which headlights you choose – the principles of choice are the same for everyone. To choose the right set of headlights, you should follow some tips:

When buying headlights, first of all pay attention to their appearance. Whether xenon or diode, the headlight should not “lobble”, its parts should be tightly fitted to each other; carefully check the tightness of the headlight

The sealant must be applied around the entire perimeter of the glass. If you find even the slightest omission, such a headlight is not suitable for use. If water gets in, a short circuit will most likely occur, and if the temperature changes, the headlight glass will fog up, worsening light emission. Similarly, headlights with deformed glass are not suitable for use - scratches, unevenness or even chips are unacceptable; Many car enthusiasts get carried away with tuning their car and do not notice that it significantly worsens safety. It is not advisable to choose headlights with tinted glass - a black film applied to them. Such headlights are practically invisible in the daytime, which can provoke a dangerous situation on the road; When choosing a manufacturer, be guided by what kind of headlights you want to purchase - standard or alternative. Standard headlights are made by Osvar. If you choose an unreliable manufacturer, the headlight may not be sealed tightly enough - in this case, the glass surface will often fog up.

For the most part, reliable headlights for the VAZ-2109 can be purchased within 10 thousand rubles for a set of front optics, and the price for rear lights varies from 1 to 4 thousand. Such a cost of headlights can really provide you with a quality purchase and a long time of use.

Purely tuning

What can I say – there is no limit to perfection (and beauty). Therefore, many motorists try to improve the appearance of their car. Headlights with lenses look much better and give the car a noble look.

As I wrote, many people install lenses on their cars, even on the halogen version of lamps. That is, there is no task here to somehow increase the luminous flux - just tuning. Although (in fairness) the lenses allow this light to be focused, making it more clearly directed to the desired areas of the road.

But often lenses are installed, tritely, with “angel eyes”, that is, an aesthetic appearance. THAT'S ALL! But lensed optics are not just “decorations”; there are very specific tasks that they solve.

General information about headlights

Lensed headlights VAZ 2109

VAZ 2109 headlight lenses today are already much more popular than ordinary ones, which are not even installed anymore. They consist of higher quality components just like regular ones. To verify the correctness of this statement, it is worth studying other types of headlights known today and which are competitors to lensed ones:

With a reflector or reflector, which is a concave mirror surface. Thanks to this element, such headlights form the necessary light beam. The best type of reflector is considered to be one that has a stepped structure. This reflector looks more like a faceted glass. Each segment of such a reflector is responsible for illuminating a specific part of the road.

• There are headlights with two reflectors. Such lights are called two-section and in them one sector is responsible for the low beam, the other for the high beam.
• Today in stores you can also find crystal headlights with a segmented reflector and transparent glass. Such glass does not become cloudy or scratched, and does not even change its color over time, like ordinary headlights that can turn yellow.

Lensed headlights for VAZ 2109

https://youtube.com/watch?v=19BpeNHJtpw

• Corrugated headlights are another type of reflector headlight. They come in glass with reflectors and corrugated glass. When trying to tune such headlights, problems may arise. There is no way to install xenon bulbs in them, and to install new lenses, you will have to grind the corrugation of the glass.
• The optics are modular, giving a completely different level of light. Suitable for all car owners who dream of changing the appearance of their car. Various types of modules are built into such lamps: for high beam, low beam and fog light. This headlight also includes headlights and turn signals.

Lensed headlights for VAZ 2109

Standard installation from the factory

Firstly, the basic versions do not come with lensed optics; they are installed only in the almost maximum and maximum configurations.

Secondly, sometimes it is installed on a regular halogen. But why? Again, to provide better focusing of the light beam, and also to remove possible glare of oncoming drivers.

Third, the lenses are installed with serious equipment (a bunch of sensors, automatic adjustment of the light angle, etc.). Often, when a car turns, the lenses tilt to a certain angle, effectively illuminating the corner. THAT IS, THIS IS REALLY SAFETY.

But this equipment is expensive, which is why it comes only in maximum configurations.

Advantages of lensed headlights

• Low power consumption.
• High luminous efficiency of the VAZ 2109 headlight lens.
• Complete security.
• Better visibility.
• High efficiency compared to other types of headlights.
• Effective light distribution.
• Clear cut-off line.
• The illumination of the road is much wider.
• The sides of the oncoming and passing path are clearly visible.
• Economical washer fluid consumption due to the smaller headlight area.
• Stylish and attractive appearance.
• Possibility of installing xenon bulbs.

Lens headlights for VAZ 2109

There are practically no disadvantages. You can only complain about the complex setup, but it is inevitable. Lenses should be adjusted to high standards. Safety depends on this, and one cannot argue with such things.

Note. The factory almost never installed these types of lenses on the VAZ 2109, but if suddenly they are present, it means they are configured normally.

Pros of setting up such headlights

• Adjusting the headlights is very important, because if there is even a slight misalignment or deviation in position, all this will lead to blinding oncoming drivers.
• Incorrectly configured lensed headlights significantly impair the visibility of the driver of the VAZ 2109.
• You can spend a considerable amount of money on setting up such headlights from specialists, or you can do everything yourself.

How to configure it yourself

The problem with an incorrectly adjusted lensed headlight is that it dazzles oncoming drivers to an even greater extent than in the case of conventional headlights. The low and high beam beams coincide in height, which is a disadvantage in this case.

Note. When a motorist tries to adjust the low beam headlights, the high beam begins to shine right under his nose. When the high beam is set to the desired position, the low beam begins to blind oncoming people. Thus, correct adjustment should imply proper separation of the low and high beams. How to do this is given below.

• First, you need to heat the headlight housing around the entire perimeter of the glass with a hairdryer. This will allow the sealant to soften.
• The glass now needs to be carefully separated from the body.
• Remove the decorative reflector and low beam lens.
• We adjust the corrector drive leash so that it fits between the reflector and the lens body.

How does the lens work?

Actually, many people now have a question: how is the flow of light cut, due to which it is corrected horizontally and not “allowed” vertically?

If you disassemble the structure, it consists of a separate block. This is the headlight, the reflector and the lamp itself, be it xenon, halogen or LEDs. The lens itself focuses the light beam onto the road. Actually this is its main function.

In order to cut the beam of light vertically, special magnetic curtains are used, or there is automatic adjustment of the headlights; they lower to a safe angle in the presence of oncoming traffic.

Let's think about the pros and cons of installation

Needless to say, now there are various tasks for installing lenses in car headlights. Be it tuning, improving performance or just a normal glow.

The advantages can be called:

• Beautiful
• Improved performance
• Functionality

But there are also a lot of disadvantages here. If you remember the story with illegal xenon lamps, they are generally prohibited! That is, lenses installed in makeshift conditions with your own hands do not have permission, this must be understood. It’s worth looking at the model range of your car; if the maximum versions have lensed optics, then you can try installing stock headlights.

After installation, you need to adjust them correctly, otherwise you will simply worsen the road illumination.

Also, for installation you have to disassemble the lamp, that is, remove the glass. It can be trivial to break, or then not glue it tightly.

So think 10 times before installing such equipment in your headlights. HOWEVER, with xenon, they are required!

Problems with law

Today there is no fine for installing bi-xenon if you meet a number of requirements in accordance with the law. The times of “free” xenon are over. What needs to be done for the installation of bi-xenon to be considered legal? The rules are given below:

Note. The automatic corrector is capable of maintaining a constant tilt of the headlight beam relative to the road. You can install an autocorrector on a VAZ 2109, either imported or domestically developed.

After the front optics are in order, you need to resolve issues with documents:

This entire procedure does not require investing a lot of money. For just 5 thousand rubles it will be possible to formalize all this and legalize the bi-xenon on the VAZ 2109. When working with your own hands, it is recommended to do everything according to the instructions, preferably step-by-step. In this case, a creative approach to the matter must be excluded, because we are talking about safety. Video and photo materials will really help in your work. The price for installing such headlights in specialized services by professionals is quite high. Therefore, it is recommended to learn how to do everything yourself.

Source

A few words about the law

Guys, just like any ILLEGAL addition to the headlight design - handicraft lenses are not LEGAL. Traffic police officers can easily remove them, and if you take them off you will not pass the technical inspection.

In order to establish legal options, you need to contact a certified organization. Sometimes you have to change the entire headlight. Often, permission from the traffic police is even required to make changes to the design.

Now a short video about how to install it into standard optics, many still install it in their garages.

I’ll end with this, I think it was informative. Sincerely yours, AUTOBLOGGER.

( 9 votes, average: 4.56 out of 5)

Similar news

Silk-screen printing on car glass. Why is this necessary? And is it possible?

DIY dark optics

Tuning VAZ headlights in a dark color is done using matte paint, tape, and a knife. Beforehand, the optics are dismantled and the headlight glasses are separated from the body. The reflector is sealed with masking tape. The inner surface of the headlight is covered with dark paint. Do the same with turn signals. If the glasses of the last element are reddish in color, then they are replaced with transparent analogues.

The next step involves fixing the headlight glass using sealant. Similar tuning

does not have a negative impact on the quality of the light beam of the optics.
to install and connect the fog lights on your own These optics are designed to improve the illumination of the road surface during snowfall, fog or rain. Such tuning is carried out using the following materials:

Choosing fog lights

Fog lamps on the VAZ-2109 are represented by models from several manufacturers. The highest quality and brightest are fog lights from Osram and Philips. Such headlights provide increased light output, have a long service life and are considered the best.

VAZ 2109 with fog lights

If you want to focus not so much on the brightness of your fog lights, but on their long-term service, feel free to choose the Philips EcoVision model. This model has an ideal price-quality ratio and is rightfully called the optimal choice in the class of fog lights for the VAZ-2109. Chinese fog lights have one advantage - low cost, but their build quality leaves much to be desired.

Remember that when choosing headlights for your car, you are responsible not only for your safety on the road, but also for the health and lives of other road users.

WE INSTALL B-XENON LENSES AT HOME

INSTALLING BIXENON LENSES

Without the help of others.

The rear dimensions of the VAZ 2109 have a special design. For such optics, rapid oxidation of contacts and breakage of light bulbs are typical. Auto mechanics advise purchasing tuned taillights for certain reasons. It is necessary to evaluate the suit of the product in advance. Rear markers usually have seals where the housing and body contact. Otherwise, sealant will come in handy.

If the lantern is not airtight, then there will be gaps in the connections between its parts. It is recommended to take tuned flashlights with separate sockets for each bulb. Auto mechanics do not recommend using tinted rear lights. The quality of light should not have an impact on safety.

To install the upgraded rear dimensions yourself, you will need to remove the plastic panels from the luggage compartment. The electronic connector is disconnected. The nuts designed to secure the headlight to the body are unscrewed. New optics are installed and screwed to the VAZ body. The connector is connected. To seal the joint, use a sealant.

The process of pasting headlights

The algorithm is as follows:

• the headlights are carefully dismantled and disassembled;
• The reflector is removed using an abrasive material or a special liquid.

It is recommended to cover the glass with masking tape to avoid scratching it during work. To make it easier to level the film around the edges, you can use a spatula that is not too sharp. It's a little more difficult to apply film to the taillights. The gluing process itself is the same. Only the preparatory stage is somewhat different:

• the battery is turned off;
• the wires that lead to the lighting fixture are disconnected;
• The flashlight itself is disassembled.

Only after this can the procedure described above be carried out.

Pasting car headlights

In general, tuning a VAZ 2109 (21099) with your own hands is a simple process that almost anyone can do. But it also has several negative sides:

• significant deterioration of lighting;
• tinting is prohibited by law and is punishable by administrative penalties;
• possible problems during technical inspection.

Therefore, when doing such tuning with your own hands, you should understand and take into account these nuances. With the correct selection of materials and compliance with technical requirements, tuning, which was done by yourself, will not only add beauty to your car, but will also provide it with greater practicality.

Car with "angel eyes"

There is an option to make “Angel Eyes” on the VAZ 2109 yourself. Neon tubes are used for this purpose. They are bent and mounted on the front optics. The mechanism is equipped with a special ignition unit. Choose any color of the glow. To fix the rings, sealant is used.

To obtain an excellent cross-section you will need LEDs. The ring is made from plastic sticks, which are heated with a hair dryer. The purchased material is wound onto a jar. The legs of the diodes are connected together using a soldering iron. The minus is soldered to the minus, and the plus to the plus. Then the LED legs are soldered to the wires.

Nail polish is used to fix the diodes. The product is applied to the ends. Varnish is used to ensure reliable fastening of the diodes and good contact of the stick with the previous element. For “angel eyes” with “eyelashes” you will need to make a notch along the entire length of the sticks. A distance of 10 mm is maintained between the “eyelashes”. Their depth is equal to 5 mm.

How to install lenses in the headlights of a VAZ 2109.

install without the help of others

“angel eyes”, you will need to disassemble the optics housing and remove the glass. The surface of the reflector is cleaned of debris and dirt. It is recommended to use cotton swabs for this purpose. You cannot do similar work with chemical agents. It is forbidden to touch the surface with your hands. A sealant is applied to the glass. The rings are installed at their destination, and the LED elements are immediately placed at the top. Then the wires are laid. The notches on the ring are directed outward. Silicone is applied between the glass and the headlight. This product dries in 30 minutes.

Power is connected to the optics. For this purpose, the plug is disconnected for you. The last element is designed to include dimensions and turn signals. Their male connectors are connected together. The structure is connected to the “mother” of the direction indicators. The “plus” from the headlights is connected to the free “female” connector. A negative wire is connected to the turning light mounts. The xenon produced by the VAZ 2109 provides a very positive result if the car is equipped with lenses.

For frequent driving in the dark, xenon lenses . Such tuning makes it easier to drive a car in the dark. The lenses are mounted on various groups of sockets for automobile lamps. To install them in a standard base, you will need to remove the outer glass of the optics. Then the lens is placed. If necessary, tuning of headlights on 2109 is carried out in a car repair shop.

No duplicates found

At first I wanted to delete the minus and write about the collective farmer, but then I read it all to the end and changed my mind. 1. The guy is not a handyman, which is always welcome. 2. No one convinced him to get rid of him.

3. Driving a vehicle on the front of which there are installed lighting devices with red lights or red reflective devices, as well as lighting devices, the color of the lights and the mode of operation of which do not comply with the requirements of the Basic Regulations for the admission of vehicles to operation and the duties of officials ensuring road safety, –

entails deprivation of the right to drive vehicles for a period of six months to one year with confiscation of the specified instruments and accessories.

Everything matches. Before installation, the topic was studied thoroughly.

Tuning headlights for VAZ 2109

Every car enthusiast wants his equipment to become noticeable and original. You can upgrade any car, regardless of year and model. “Nine” is a popular car of the last century, produced by the Russian automobile industry. One of the reconstruction options is tuning the headlights on the VAZ 2109. The headlights on the VAZ 21099 and the headlights on the VAZ 2108 are the same.

Modernization of headlights

Car repairers believe that tuned headlights are more reliable than those installed at factories. Rework options:

• replacing standard optics with xenon;
• use of LEDs;
• covering lighting structures with tinted products.

Replacing lamps

Factory bulbs installed in a car do not last long. LED lamps have the following advantages over a conventional incandescent lamp:

• service life of at least 5 years;
• ergonomics;
• low power consumption;
• fast response.

At night, it is very important to have a good view of the road. Changing the optics often improves the light performance of devices

Xenon lamps are more powerful than diodes, but LED lamps are easy to maintain and have a low cost. Do not forget that unregulated xenon lamps emit a very powerful luminous flux. This can lead to a traffic accident, as the oncoming driver may be temporarily blinded by the bright light.

Painting

A common method of auto tuning is darkening the optics with a special varnish or painting. To complete the work you will need a can of black paint. Only materials with high temperature ratings are allowed. Regular paint will come off as a result of heating, and no tinting effect will remain.

The work is carried out in stages:

1. The headlight is removed from the car.
2. The optics are completely disassembled.
3. Using a curved screwdriver, unscrew the screws that hold the headlight mask.
4. The turn signal reflector is removed.
5. The chrome paint is being cleaned off.
6. Apply primer for plastic in three layers.
7. After the primer has completely dried, paint is applied (auto mechanics recommend applying paint in 5 layers.)
8. The structure is being assembled.
9. The headlight glass is cleaned of old compounds.
10. The glass is washed, wiped dry and treated with a degreaser.
11. Black sealant is applied along the edges.
12. The device is assembled and installed on the car.
13. The connection is made to the circuit through the fuse block.

Film tinting

An inexpensive way to change the optics of a VAZ 2109 is to use a tint film. The result depends on the quality of the materials used. Good tint films have high light transmittance. This is an important indicator on which the lives of all road users depend. It is allowed to apply the film to the inner and outer surfaces of the headlight.

Making spectacular tuning on Lada Kalina: 5 steps to results

Applying a tinting film to the external surface is possible without removing the optics from the car. To do this, you need to prepare the surface: remove dust, dirt, the surface must be clean and dry. A notch is made and a piece of the required size is cut out. Soap and water are applied to the glass. The protective layer is removed from the film and applied to the headlight. The air is expelled. The surface is carefully wiped with a rag to remove any remaining liquid. This method is fast and simple. Even a car enthusiast who does not have special skills and knowledge can perform it.

The tinting film is easy to remove. But tuning VAZ 2109 headlights with film has its downsides:

• peeling of the material after some time;
• reducing the brightness of the emitted light;
• violation of traffic rules, which may result in a fine;
• Difficulties in passing technical inspection.

Rear foot improvement

Tuning the rear lights of the VAZ 2109 is simple. You can do this operation yourself or contact a specialized auto center. Modernization of rear stops is often necessary even for factory optics: contacts oxidize, lamps burn out. Several reconstruction options are possible:

Using LED overlays. LED strips can create a unique pattern and make a car stand out in traffic. Application of diode rings. LED strips will allow you to define the hind feet and make them more expressive. Tinting. You can tune car headlights using film or paint.

It is worth paying attention to the characteristics of the material: it must withstand high temperatures.

Changing the appearance of a car is an interesting activity. There are many types of tuning known

It is important to always remember that a car is a highly dangerous vehicle. The driver should always have a good view and lighting in the dark