How to install a hood spring on a VAZ 2109

At the moment, comprehensive tuning of the VAZ 2109 is perhaps the only option to make your VAZ stand out from the crowd of others by creating something special out of it. There are 3 ways:

services of a certified service station;
your strengths;
a combination of both options (the most common case).

Various issues are touched upon during the work process. Tuning 2109 concerns the following areas:

It is worth considering that many components, especially in the area of body kit, aimed at the VAZ 2109, are also suitable for other models (VAZ 2199, 2108, etc.).

Appearance

Overlays

The simplest tuning option is to install the overlays yourself. These include inexpensive accessories that are easy and quick to install. These are windshields fixed to the windows, fly swatters for the hood, plastic eyelashes for headlights, door handle covers (chrome), tuning bumpers by integrating a fine mesh. The cost of such elements is low and amounts to about 1,000 rubles. or less.

Wheels and tires

Mounting fancy alloy wheels is the most common option. VAZs are equipped with chrome-plated, painted or nickel-plated wheels, and the diameter, as a rule, varies from 14 to 17 inches. Large wheels are combined with low-profile tires. This makes the VAZ 2109 stand out, but affects comfort - the ride becomes harsh.

Repair

To repair the lock and replace parts, you will need the following tools:

open-end wrench for 17 and 19;
liquid oil for lubrication;
Screwdriver Set;
pliers or pliers.

Repairing a lock yourself requires some skill and slowness, so you need to count on at least 2 hours. First you need to determine which mechanism in the lock has failed; most often it requires repair:

springs (zam, hook, latch);
replacement of traction.

It is unlikely that it will be possible to repair the hood lock in a few minutes for the first time.

Replacing the lock spring

The lock spring is located on the car frame. Wear of the metal part, deformation and cracks cause the hood to not close tightly. Using the VAZ 2114 as an example, you can install the lock spring in several stages:

Disconnection from the spring of the traction mechanism. A screwdriver is used.
Removing the spring.
Installing a new lock spring.

Replacing the latch spring

If you need to change the latch lock spring, for example, on a VAZ 2114, you will need a flat-head screwdriver and a 19mm wrench. You can change the spring in three stages:

Kickback (loosening) of the locknut.
Unscrewing the pin.
When the locking mechanism is removed, the spring is replaced with a new one and a similar assembly is performed in the reverse order.

After repairs, it is recommended to always check how the hood latches after replacing the part.

Replacing the hook spring

Unlike the previous two spring replacements, replacing the lock spring will require either pliers or fine tweezers. Repair is more painstaking and requires a certain skill. The work is carried out according to the following principle:

Use a screwdriver to pry off the lock washer that holds the hook axis.
The washer is removed from the grooves with tweezers (or pliers).
The hook axis is removed.
The spring is removed.

Replacing the hood of a VAZ 2106 Zhiguli

Repair manuals
Repair manual for VAZ 2106 (Zhiguli) 1976-2005.
Replacing the hood

Repairing auto parts yourself is a responsible task that should be taken as seriously as possible. Sometimes a faulty spare part takes the driver by surprise, forcing him to spend a lot of time and money searching for a good service station, but there is an alternative solution to the problem; this requires a small amount of knowledge and a set of tools.

When replacing the hood of a VAZ 2106 Zhiguli is being repaired, you need to be extremely careful and not neglect the little things. To get acquainted with the issue, car enthusiasts often use various Internet portals dedicated to auto parts. Some of them use narrowly focused forums. But, as a rule, only generalized information is provided there, which is known initially. Where can you find a reliable source that offers really useful things? Our portal is open for this 24 hours a day. Online mode allows us to help clients at any time convenient for them. Moreover, a mobile version has been developed that is available to everyone.

A detailed description of such a unit as replacing the hood of a VAZ 2106 Zhiguli has a good structure with thematic headings. In addition, there is always the opportunity to familiarize yourself with the intricacies of installation. There are often situations when a driver is confident in his abilities, but when he gets down to work, questions begin to arise. Thanks to our portal, such moments can be easily avoided. The site is a database that is updated regularly. By using it as a support during repair work, the car enthusiast receives a serious advantage. Each of the articles has reliable support, tested in practice.

In addition to the repair manual, the owner of a personal car will be able to prevent a lot of breakdowns that occur due to the human factor, thanks to the information located on the site. Users are presented with a lot of useful recommendations for proper operation, which will help significantly extend the life of the unit and avoid many negative consequences.

Online support is an excellent and most convenient way to obtain the necessary information. Another significant plus is that articles are written for people. We understand that the reader will do everything with his own hands, and we try to make it as convenient and efficient as possible. Use the resource at any time of the day and find the answer to any question you may have regarding cars.

↓ Comments ↓

1. General information

1.0 General information 1.1 Safety precautions

2. Diagnosis of faults

What to do if the cable breaks in the cabin

The cable that allows you to open and close an important part of the VAZ-2109 is a multi-core or single-core wire made of steel, placed in a sheath, with a metal braid on top of it. The main task of the cable is to open the hood when force is applied to the handle of the locking device.

To open

structure when the cable

inside the VAZ-
2109
, it is necessary to inspect and evaluate the area where the rupture occurred. Despite the breakdown, access to some parts and areas was probably preserved, and these are the ones that should be examined. The examination of the condition of parts near the hood begins with an inspection of the lock handle.

The mechanism for changing the position of the hood of the VAZ- 2109 involves equipping the structure with a lock and a hook, the latter acting as a safety device against unauthorized opening of the hood. Parts are placed in its front part. The manufacturer brought the handle into the cabin and built it on the left right under the dashboard. Having seen the break point, proceed to further work.

Troubleshooting

Perhaps you should start by eliminating the most simple breakdowns. Most often, car enthusiasts are faced with the appearance of dark spots on the surface of the body. There are two reasons for this:

Exposure to (use of) hot water at a temperature of about 800 degrees when washing a car at a car wash.
The appearance of stains - the use of paint-corroding substances to wash cars and remove wax coatings. To eliminate the problem, minor damage can be removed by polishing, while serious damage requires repainting the car body after repair.

Another common problem is the appearance of pink spots on the body of a light-colored car. This is caused by coolant entering the body. In this case, polishing will solve the problem.

Loss of shine of the enamel covering the body

There are several main reasons:

Prolonged exposure to sunlight;
Use of substances that corrode paint for car washing;
use of dry and rough cleaning material.

These reasons can be solved by polishing the body, and if that doesn’t help, by repainting it. The penetration of water into the interior also damages the body, which means:

Large gap between the door and the body around the perimeter.
The door seal frame is jammed.

The problem can be solved by adjusting the position of the door, or it is worth adjusting the lock latch in the first option, and in the second case it is worth thinking about replacing the seal.

Suspension

Its improvement occurs through the installation of higher quality components. These are various shock absorbers: type Pilenga SH-P 2708 (RUB 1,040), MONROE ORIGINAL (RUB 1,950), etc. Mounting of supports from ASOMI (RUB 2,100), SEVI EXPERT takes place "(1,200 rubles), etc. Springs from the brands ASOMI, FOOS, KONI, Techno Ressor and others are also installed.

Many people cut off coils of springs in order to lower the car, although this is fraught with losses in controllability, and changes in the braking system are completely punishable by traffic rules. This, however, does not stop VAZ 2109 owners who buy perforated brake discs, install 2-piston calipers, branded brake pads, etc.

Salon

Do-it-yourself tuning 2109 in the cabin is the most common option for independent modifications.

There is a direct dependence on the budget. If it is limited, you can get by with buying small things: various decorations, an armrest, covers for the gearshift lever, pedals and the parking brake handle. LED lighting in the lampshades will also look impressive and stylish.

If you want to make high-quality sound insulation, the interior of the VAZ 2109 is completely disassembled, and the dashboard is often dismantled. After this, the surface is washed, dried, degreased, and then a layer of vibration-proofing material, usually rubber-based, is glued on. A layer of splen (an artificial sound insulator) is glued on top of it. When gluing, it is important to do everything end-to-end and do not forget to roll the material with a roller.

Music lovers go for installation of high-quality “music”, which means buying a new radio and acoustics, as well as installing a subwoofer and amplifier. Many agree to replace the wiring.

The interior is often reupholstered with expensive materials to add chic to it. One of the most popular methods is to use Alcantara-type suede, leather or high-quality leatherette, although this is not cheap.

Tuning this model is an exciting activity that depends only on desires, imagination and budget.

Open the door

This method is quite dubious, since in this case there is a risk of “scaring” the alarm even more and accidentally locking the car in “hard” mode (the engine will not start). If the alarm system is not so sophisticated, then you can try using a special air bag (can be replaced with a wooden block).

While the airbag is deflated, you should try to place it in the gap between the door and the car body. After this, we begin to gradually inflate it. By moving the door a little, you can insert a wire with a loop into it and catch on the “lamb”. The door opens and the happy driver finds himself inside the vehicle.

Important! If the alarm system has blocked the engine (sometimes it perceives a non-functioning battery as an attempt to steal a car), then it will be of little use if the car owner got inside.

If this method does not help, then you can move on to more radical measures, which also look rather dubious.

Removing and installing the hood

The hood of a VAZ-2109 car should preferably be done by two people.

Disconnect the wire from the negative terminal of the battery.

If you do not intend to change the hood, we recommend tying a wire or rope to the block.

Once you have the wires out, untie the rope and leave it inside the hood. This will make it easier to route the wires to the engine compartment lamp when installing the hood.

1. Open the hood and mark the location of the bolts on the bracket with a felt-tip pen.

2. Disconnect the washer hose from the tee on the hood and remove the hose from the hood.

3. Disconnect the block with wires from the engine compartment lamp and remove the wires from the hood

4. Unscrew two bolts securing the hinges to the hood on both sides and remove the hood.

Install the hood in the reverse order of removal.

If you are installing an old hood, align it with the marks you made earlier before final tightening the bolts. If you have replaced the hood, its position must be adjusted.

Increasingly, owners of VAZ cars are trying to somehow embellish their car. One of the most popular options for such an addition is the bad boy hood (read as “bad boy”). In more detail, this is a kind of hood with eyelashes that slightly cover the car's headlight.

Bad fight - it’s very easy to explain the name of such a hood with an associative component. It received this name because when it is installed, the car begins to grin ominously and a frightening effect appears with evil eyes. Well, if we take the literal translation, then bad boy is translated from English as a bad guy.

Such hoods are made by installing eyelashes on the headlights, which are most often made of high-quality plastic. Another name for cilia is plastic (plastic) covers for headlights.

It’s possible to make a bad-boy style hood with your own hands and without much difficulty. To do this, you will need to install (but first you need to clean the headlights from dirt using a regular detergent that can degrease the surface):

Eyelashes for headlights;
Weld similar and symmetrical eyelashes to the hood;
Next you need to weld the plates;
After welding, they are ground at the welding points and primed;
Paint the hood or apply some kind of covering to the hood.

What are the main functions of eyelashes on a car?

If you are looking for an answer to this question, then the main reason for using eyelashes on a car is to improve the design because after their installation, the vehicle begins to seem more brutal and even aggressive. Well, another advantage of installing a bad boy hood with eyelashes is the increase in density between the headlights and the hood.

There are a small number of types of overlays. Some drivers rarely complain that when the speed increases above 100 km/h, the linings begin to bend and damage the surface of the hood. As a rule, the fault here lies only with the owner himself. Such cases indicate that the owner of the vehicle did not properly secure them.

You can also purchase special, ready-made hoods with the bad boy style, which already have headlights.

Removing and installing the hood of the VAZ 2109 Lada Samara