Size of winter and summer tires for Lada Largus and Largus van. Rules for choosing tires for the Lada Largus Wheels for winter for the Largus Cross

January 29, 2015 Lada.Online 397 137 98

The size of tires and wheels not only adds style to the car, but also greatly influences the vehicle's performance on the road. Each manufacturer indicates acceptable standard sizes, and AVTOVAZ is no exception. In this review, we will look at the wheel size of the Lada Largus.

Usually, the manufacturer, depending on the modification of the car, indicates several acceptable wheel sizes, Lada Largus is an exception. The instruction manual indicates the only wheel size for all trim levels: 185/65R15 . Lada Largus wheel parameters: 6Jx15, offset (ET) for R15 = ET50. Wheel hub bolt pattern 4x100. Everyone knows that the Lada Largus is a 2006 Dacia Logan MCV adapted for the Russian market. The technical characteristics of the foreign car indicate exactly the same wheel size.

Based on reviews and surveys of Lada Largus car owners, we can summarize:

1. The most popular tire size with a diameter of 14 inches turned out to be 185/70R14 , by the way, it is indicated in the table with tire pressure. Another less popular option is 165/80R14.
2. The majority use the standard wheel size 185/65R15 . Another popular size of the same radius is 195/65R15 . A few installed 205/60R15 and 195/60R15 tires on their cars.
3. Fans of larger wheels install tires: 205/55 R16 , 195/60 R16 and 195/55 R16.
4. R17 wheels: 205/50R17 , 205/45R17, 225/45R17 or 215/50R17.
5. Exclusive sizes: 215/35R18 and 215/40/18.

R is not a radius, but a designation of the radius of the tire, and the number is the diameter of the rim in inches. The most popular wheel sizes are shown in bold.

When choosing wheels, you should take into account the full diameter of the wheel; it should not differ much from the standard one. Compatibility table:

Green indicates the minimum deviation of the wheel diameter (up to 3 mm); Orange indicates a diameter deviation from 3 to 6 mm.

Don't forget about the rim width:

Tire size for Lada Largus

Acceptable parameters are indicated depending on the modification of the vehicle; the Lada Largus tire in this version is an exception. The operating manual indicates the only tire size for the Largus car for all trim levels - 185/65 R15.

Product size Lada Largus

Design parameters for Lada largus are designated as follows: 6Jx15, offset (ET) for R15 = ET50. The hub bolt pattern is 4×100. The Lada Largus car is adapted for the Russian market. The technical passport of the Largus foreign car indicates the same wheel size.

Important!

The most popular tire size with a diameter of 14 inches was 185/70 R14. Another less popular option is the 165/80 R14 model.

Many motorists set the standard wheel size to 185/65 R15. Another popular size of the same diameter is 195/65 R15. A few installed 205/60 R15 and 195/60 R15 tires on their cars.

Many motorists like to install large tires: 205/55 R16, 195/60 R16 and 195/55 R16.

R17 wheels: 205/50 R17, 205/45 R17, 225/45 R17 or 215/50 R17.

Exclusive sizes: 215/35 R18 and 215/40/18.

Note!

R is not a radius, but a designation of the radius of the tire, and the number is the diameter of the rim, measured in inches.

Wheels for Largus Cross 16

A lot of time has passed since the start of serial production of the Lada Largus station wagon. And, probably, during the long-term operation of this car, many drivers were faced with the need to replace discs, especially when driving on Russian roads. But when looking for a replacement option, it is not always possible to buy a disk that strictly complies with factory standards. Therefore, the answer to the question is important: how to install an alternative type of wheels that differ from the factory ones without harm to the car.

Return to contents

Compliance criteria for linear dimensions

Wheels with a diameter of 16 inches are standard by default for the Largus Cross when installed at the factory. And if the rim is damaged beyond repair, AvtoVAZ recommends replacing the damaged one with a disc that exactly matches the factory parameters: sixteen-inch, because the dimensions and shape of the wheel were designed for the safest and most trouble-free driving.

Not all motorists follow this rule. Many are guided by appearance and buy a more beautiful rim, not always taking into account its difference in diameter, width, etc. Let's take a closer look at the parameters that can or cannot be changed when installing a new disk.

Each manufacturer recommends certain wheel characteristics. They are indicated in the car’s passport data in the form of a formula. For example, this: 6J15PCD4-98et35DIA58.6, where 6J15 is the width and diameter of the rim in inches, the numbers 4 and 98 indicate, respectively, the number of bolt holes and the distance between the bolts in mm. Et - “disc overhang (extrusion depth relative to the rim axis). This parameter can be either positive or negative, or zero. 58.6 is the diameter of the central hole in mm.

Purchasing a wheel other than the factory one in the above dimensions affects:

• quality of use of the vehicle chassis;
• suspension wear period;
• driving safety;
• risk of being denied warranty service.

The larger the rim diameter, the smaller the tire profile should be. The profile is also called the height of the tire. This is the vertical distance from where the wheel sits on the tire to the most protruding part of the tread. So this is what we get by increasing the rim. The wheel becomes lighter due to the reduction of the same tire profile, the car becomes more controllable, has better grip on the road, and, accordingly, becomes more stable.

But by increasing the diameter, you reduce the degree of passability of uneven areas, for example, when driving over rough terrain. And also due to the fact that there is less rubber between the rim and the road, it is easier to damage it. There is no point in reducing the profile from its rated value if you drive on poor-quality road surfaces.

The diameter of the center hole may be slightly larger than the diameter of the hub (the central part on which the disc is mounted). In this case, an additional adapter ring is used for installation and balancing.

If the diameter of the hole is smaller than the diameter of the hub, such a rim is not suitable: it simply cannot be secured.

Return to contents

Manufacturing methods and other factors

Linear parameters are not the only deciding factor. Some also choose to change the material the disc is made from. This is an important point - the material from which the purchased disc will be made, as well as the technology for its manufacture. The most popular types of discs found on sale are made of steel, aluminum, magnesium and titanium.

This series is arranged in ascending order of cost. At the same time, steel wheels are the heaviest, but flexible. Aluminum and magnesium alloys produce lightweight parts. This certainly significantly reduces fuel consumption. But such rims are quite easy to damage. But titanium gives the highest strength index. This is what you pay the most.

But for some drivers, it is not necessary to wait for damage to “change the car’s shoes. This applies to tuning enthusiasts. But here's what you need to know when choosing the color and appearance of a disc, which is made in different ways. There are stamped, cast and forged discs. So, manufacturing technology affects the ability to obtain a certain color and variety of styles. Stamped and forged wheels, due to the peculiarities of the technology, cannot be presented to customers in aesthetic diversity. But cast ones are easy. They are represented on the market in the largest number of positions.

The degree of damage and fuel consumption also depend on the method of manufacturing the disc. Stamped - they bend when hit, but do not crack. They can be restored. And due to the heavy weight of the car, gasoline costs increase. Another disadvantage is their susceptibility to corrosion, which cannot be said about cast products. But if the cast disc is cracked, it cannot be repaired. But the most expensive type of disc is forged. It is very difficult to deform, and it weighs little.

The manufacturer's recommendations also indicate what the optimal tire pressure should be. After all, it happens that when drivers change cars, out of habit they pump up the tire to one level, but it turns out to be either too low or too high. Both are bad. At a low level, the rubber on the disc is damaged, and at a high level, there is a high probability of breaking through the ramp or damaging the spool.

When choosing the optimal disc option, you should take into account many parameters that match the vehicle and do not forget about safety.

Return to contents

Which disc is suitable for Lada Largus Cross

As you know, the prefix Cross in the name of the Lada model means that it is an off-road type vehicle. One of the most significant differences between the Cross version and its predecessor Lada Largus is the increased wheelbase. On a regular Largus, four 15-inch disks are installed by default. In Cross, the diameter was increased to 16. By the way, unlike many automakers who indicate possible variations in wheel diameters, AvtoVAZ clearly stated the only acceptable option for the wheel diameter.

But despite this, the task remains: to find out which disk can still be installed on this machine. Since the standard Lada Largus has been on the market for a longer time, it makes sense to turn to the reviews of its drivers. Their opinion: the version with 15-inch wheels is most often replaced with tires with a rim diameter of 14 units.

This car, as mentioned above, comes with 4 standard 16-inch wheels from the factory. And making them an inch smaller in diameter makes no sense. Because then the car, at least in terms of wheel parameters, will turn into an ordinary station wagon.

In addition to the diameter, AvtoVAZ also indicates other recommended parameters.

The recommended tire pressure is also indicated. The latter is selected individually by each driver, depending on driving style and personal preferences. The AvtoVAZ plant recommends increasing the pressure to 2.4 atmospheres on the front wheels and 2.6 atmospheres on the rear wheels (the difference is due to the fact that the car is rear-wheel drive).

But drivers of the Lada Largus station wagon claim from their own experience that these parameters are indicated only for factory tires. In reality, if you change tires, at this value the ride quality deteriorates, and the mark should be lowered to 2.1–2.2 atm. It should also be recalled that winter tires should have a tire pressure 0.2 atm higher. That is, in the case of Largus Cross it will be 2.6 and 2.8 atm, respectively.

The width of the Lada rim may vary by 1–1.5 inches (this is the allowed deviation for a disc with a diameter of 15 or more). The same width should be 25–30% less than the width of the tire profile. These are the deviations from the factory version of the wheel that are theoretically allowed when replacing a wheel on a Lada Largus Cross.

Remember that when installing a disk with changed parameters, especially diameter, AvtoVAZ has every right to terminate the vehicle’s warranty service.

expertvaz.ru

How to choose the right tire diameter

Choosing the required tire diameter for a domestic car
The choice of tires or wheels for the Lada Largus affects not only the external design of the car, but also the behavior of vehicles on the roads. Car manufacturers indicate acceptable dimensions. Before installing the appropriate components, you need to familiarize yourself with the basic parameters. After all, replacement of products is carried out in order to improve driving performance.

The Largus instruction manual indicates only one acceptable size - 185/65 R15. Factories install stamped wheels on Largus 15 inches. In addition to the standard size declared by the manufacturer, car enthusiasts install 14-inch tires with a dimension of 185/70 R14. Among 15-inch tires, the tires chosen for Largus are 195/65 R15; 205/60 R15, 195/60 R15 are rare.

Note!

Car enthusiasts who prefer larger-sized products use 205/55 R16, 195/60 R16. Less common are R17: 215/50 R17, 205/50 R17. Exclusive option - 215/40 R18, 215/35 R18.

Selection of discs

Sometimes, along with the tires, the rims also need to be replaced. The factory version is presented in the form of a 16-inch sample and is installed on absolutely the entire automobile range of the brand. If replacement is necessary, for example, new tires on Largus Cross or a failed (damaged) disk, it is recommended to install a similar one in size. The parameters must be accurate, which will extend the life of not only the disk itself, but also protect the driver.

Not all car enthusiasts follow this rule, trying to install wheels according to the principle of a spectacular appearance. This will not improve the driving performance of the vehicle, but it will definitely cause problems. The essence lies in the factory specifications, which are adjusted to every detail of the car. This is the permissible rim width, diameter, number of holes for bolts, as well as the distance between the latter. Neglecting this rule can cause the following problems:

• car suspension wear;
• the risk of not receiving warranty service;
• problems in the chassis;
• safety and vehicle control.

Thus, if winter tires on a Lada Largus Cross require replacement, you should also worry about the rims. It is worth choosing based on parameters and technical data, and not on an attractive, external effect. Otherwise, this may lead to a number of malfunctions, an emergency situation on the road, and, as a result, monetary costs for repairs.

Which summer tires are best for Largus Cross cars?

Choosing summer tires for the Largus Kross
Tires on the Largus must necessarily correspond to the standard size of the wheel structure.

When choosing, the speed and weight index, brand and tread pattern are taken into account. The production date of the products plays an important role - if they were made more than 5 years ago, it is better to refuse such a purchase.

You may be interested in this About Chinese car tires

The pattern is divided into two types: asymmetrical, directional and symmetrical. The last option is considered the most popular. Since the symmetrical pattern is suitable for most cars. This option is considered as the most convenient for moving around the city. The main reason for choosing this pattern is low cost.

The directional tread pattern allows car owners to drive off-road, providing ideal directional stability and handling. Unfortunately, there is some noise when driving off-road.

Important!

The asymmetrical pattern has better characteristics. This option helps ensure ideal directional stability and reduce the risk of aquaplaning. These products have a high price.

When replacing wheel structures, it is necessary to select standard models. When installing large components, you will have to choose the appropriate tires with a low profile. To move on a flat road, it is better to use low-profile tires. This tire improves dynamic performance and handling.

Tires and wheels for Lada Largus Cross, wheel size for Lada Largus Cross

mosautoshina.ru

What size and wheel alignment angles for Lada Largus

Dimensions of the product
Increasing the width of the products themselves will also have a positive effect on road holding, on the accuracy of car control, grip on dry roads will become better, and driving on uneven roads will become more comfortable. However, resistance to aquaplaning will deteriorate, noise will increase, fuel consumption will increase, and the tires will wear out faster.

The car is equipped with original 15-inch parts manufactured by Magnetto Wheels.

On the Lada Largus the wheel parameters are as follows: 6×15/4×100 D60.1 ET50:

• width - 6 inches;
• bolt pattern - 4×100;
• standard diameter - 15 inches;
• diameter of the central hole - 60.1 mm;
• the offset is 50 mm.

Tires for the Largus car 195 65 15

Models with dimensions 195 65 15
To supply components 195 65 15, it is advisable to familiarize yourself with the general parameters in advance. Standard dimensions 195×65 R15:

• tire width - 195 mm;
• profile height - 65%;
• rim diameter - 15 inches;
• load index - 92 (up to 5800 kg);
• speed index - H (up to 180 km/h).

About summer tires for Largus 185 65 R15

Summer tires 185 65 R15
According to car owners, the tire from Renault Logan 5.5×14/4×100 D60.1 ET43 is ideal, but the Lada Largus will need a tire size with parameters 185/70 R14. Factory-assembled 16-inch Largus Cross alloy wheels. They have unique parameters: width is 6 inches, drilling is 4x100, offset is ET50, CO is D60.1. The declared size of parts for the Lada Cross corresponds to 205/65 R16 tires. AvtoVAZ supplies Continental Premium Contact tires with a low profile (55% of the width).

The smaller the unsprung mass (this includes the mass of tires and wheels), the better the car will hold the road and accelerate faster. For example, if you install wheels that are 2 kg lighter each, then acceleration to 100 km/h will be reduced to 0.2 seconds.

You might be interested in this About tires for Niva

Installing winter tires

There are no problems with installing tires on LADA Largus. However, in some cases, when the car owner wants to install fairly large samples of winter tires, adjustment of the wheel arches may be required. It is also necessary to take into account the size factor: three-dimensional wheel models can bulge or rub when the steering wheel is turned to the maximum, for example, when reversing. An important point will be the size of tires and wheels. If the wheel is smaller, the car holds the road better, accelerates faster and becomes less fuel-hungry. The selected winter tires for Largus Cross must meet the recommended parameters described above.

Important! Large tires can cause problems related to the operation of ESP and ABS systems and lead to incorrect service of the latter.