Good afternoon everyone. I decided to touch on the banal topic of installing heated and electrically controlled mirrors from Priora 2 on a VAZ 2110. I don’t see the point in describing all the delights of owning these mirrors, but I will dwell on the installation of wiring in more detail. I hope my experience will be useful.
What we buy: 1.Prior 2 mirrors, without turn signal, not painted, heated and electrically adjustable. I'm afraid to make a mistake with the manufacturer, Ulyanovsk or Nizhny Novgorod. When disassembling the mirrors for painting, Chinese electric motors were found inside. Let's hope they won't let us down. Price 1300 rubles (as of February 2021) Samara, Rakita market;
3. Mirror control joystick 12.3769. Suitable for regular place. Convenient to manage. Has a “middle” position. The control handle does not stick out, unlike the UAZ one. Price 550 rubles, (as of July 2021) Samara, Rakita market;
4. Block for wires, for 9 females. Price 30 rubles, (as of July 2021) Samara, Rakita market; Why did you buy the wiring harness 2110.8201326-41? I was hoping to save time on installation. Did not work out. Considering that the UAZ joystick was not used and it was necessary to add 15 cm to each mirror. A waste of money. In my opinion. The only positive point is the connectors already connected to ground (black wire) with a ring tip, heating (brown), joystick backlight (yellow) and power (white). We open the connectors behind the mounting block and insert our wires into the gap.
Guys, before starting any electrical work, turn off the power to the system. This will save you from a lot of trouble.
We find the power connector for the heated rear window (gray wire with a red streak), connect it to the brown wire of the harness 2110.8201326-41.
We hang the mass in the designated place. The photo shows.
We insert the white power wire into the gap in the pink wire. In my case, the previous owner inserted a fuse into the circuit for some reason. I didn't take it out. Left it.
Mirrors on the Priora SE and the old model, what is the difference?
1) The presence of turn signals on the mirrors. SE has them, old ones don't.
2) Visibility, it is greater on the SE mirrors.
3) Mirror mounting triangle. On the SE mirrors it fits better without any gaps.
4) Protection from rain. SE mirror housings provide less protection from rain and snow.
5) The external differences of the mirrors can be seen in the following photos:
At the moment, the price of SE mirrors on Lada Priora is about 3,300 rubles.
Lada 2110 › Logbook › Priora mirrors wiring installation 2110.8201326-41
Good afternoon everyone.
I decided to touch on the banal topic of installing heated and electrically controlled mirrors from Priora 2 on a VAZ 2110. I don’t see the point in describing all the delights of owning these mirrors, but I will dwell on the installation of wiring in more detail. I hope my experience will be useful. What we buy: 1.Prior 2 mirrors, without turn signal, not painted, heated and electrically adjustable. I'm afraid to make a mistake with the manufacturer, Ulyanovsk or Nizhny Novgorod. When disassembling the mirrors for painting, Chinese electric motors were found inside. Let's hope they won't let us down. Price 1300 rubles (as of February 2021) Samara, Rakita market;
3. Mirror control joystick 12.3769. Suitable for regular place. Convenient to manage. Has a “middle” position. The control handle does not stick out, unlike the UAZ one. Price 550 rubles, (as of July 2021) Samara, Rakita market;
4. Block for wires, for 9 females. Price 30 rubles, (as of July 2021) Samara, Rakita market; Why did you buy the wiring harness 2110.8201326-41? I was hoping to save time on installation. Did not work out. Considering that the UAZ joystick was not used and it was necessary to add 15 cm to each mirror. A waste of money. In my opinion. The only positive point is the connectors already connected to ground (black wire) with a ring tip, heating (brown), joystick backlight (yellow) and power (white). We open the connectors behind the mounting block and insert our wires into the gap.
Guys, before starting any electrical work, turn off the power to the system. This will save you from a lot of trouble.
We find the power connector for the heated rear window (gray wire with a red streak), connect it to the brown wire of the harness 2110.8201326-41.
We hang the mass in the designated place. The photo shows.
We insert the white power wire into the gap in the pink wire. In my case, the previous owner inserted a fuse into the circuit for some reason. I didn't take it out. Left it.
We put the yellow one in the power supply gap for the fog lights. Gray wire. I use PTF as a DRL, so the joystick backlight will be in constant mode. It was possible to put it on the cigarette lighter, like my window regulators are made, but I was too lazy to pull additional wires, to be honest. In principle, everything worked out simply at this stage. We don’t climb anywhere, we don’t cut wires. We don’t open anything except the mounting block.
READ How to connect two joysticks to PlayStation 4
Source
Connecting rear view mirrors Priora (SE)
Black-red (right mirror)
- red connects to red-blue.
- blue with blue-black.
- green with green-black.
Block No. 2: heated mirrors:
- Instead of gray there is brown, we combine it with blue-red (black-red).
- black with black (used for heating and for turn signals).
Block No. 3: direction indicators:
- White-red.
The main thing is not to confuse the red-blue and blue-red wires. They are almost the same, so before connecting it is better to check them with a tester (multimeter or + 12V light bulb), connecting the minus of the tester to the body, and the (+) to the wire. If the lamp lights up after turning on the heated mirrors, then this is the correct wire that needs to be connected to the brown mirror wire.
You can take the plus for the turn signals from the direction indicators in the wing of the car.
- Left wing - blue-black and black wires.
- Right wing – blue and black.
By the way, for the VAZ 2172 the VAZ 2112 Coupe also borrows some body elements, for example, a spoiler.
Comments (6)
Does anyone know how to connect electric mirrors to the standard configuration: the one from the factory with mechanics?
In my opinion, all Priors immediately have heated mirrors from the factory, well, in any case, the heated mirrors are done together with the heated rear window, do that
The interior of the Priora has already been written in the top ten, now it’s time for the exterior
