How to disassemble a mirror on a VAZ 2110

How to disassemble the rear view mirror of a VAZ 2110

It often happens that the rear view mirror mount becomes loose and the mirror holds well;
in other words, she disappears (someone dropped her off at your place). It happens that the side mirror is broken or cracked - you need to change it. The mirror angle adjustment drive needs to be repaired. Of course, go to the dealership and the mirror will be attached in place. If there is no service nearby, you will have to act on your own. The rear view mirror is important on the road: the driver can observe the situation on the road in the field of view behind the rear fenders and rear bumper. The mirrors of different brands of cars are different: interior mirror and side mirrors, regular, folding, electric, etc. When removing and disassembling any mirror, you must be very careful not to damage the mirror itself.

In order to disassemble the mirror, you need the following tool:

3.2 flathead screwdrivers (they clamp the latches with them).

A narrow, long screwdriver and a piece of soft cloth (to wrap the screwdriver).

10 star or regular screwdriver with variable bits.

How to remove the electric side mirror (Included):

1. Remove the triangular trim from the front door.

3.5. Disconnect the mirror wiring connector. Do not damage the heating mirror wiring!

3. While holding the mirror, unscrew the 3 mounting screws.

4. Remove the mirror assembly.

5. The completed mirrors are made in reverse order.

Do it yourself, repair Lada Kalina mirrors, do it yourself. Removing the mirror element

Removing the rear view mirror using a mechanical drive:

1. Remove the mirror retaining bracket.

3. We remove the mirror.

4. Installation is in the reverse order.

How to remove a side rear view mirror with your own hands

This accessory is not as simple as it seems. Most often, various devices are built into it. For example: turn signals, LEDs, heating parts. For this reason, before removing the mirror, it is necessary to remove the negative charge from the battery. This is necessary in order to minimize the likelihood of a short circuit occurring during work.

replacing the side rear view mirror

The tools needed for this repair can be found in every garage. These include: a set of screwdrivers of different sizes, a household hair dryer, a plastic spatula, electrical tape, a small piece of soft cloth, and a wrench. In addition, attention to detail, caution and a desire to do everything right will come in handy.

Removal process. After the negative charge has been removed from the car battery. You can start dismantling. To do this, you need to open the car door and remove the handle for changing the mirror angle.

The process for removing the angle knob varies on individual vehicle models. For example, on some it is enough to pull the handle towards you for it to come out of the grooves. On other models, you will have to unscrew it counterclockwise or, before removing it, you will need to unscrew the bolts that hold it in place.

In order to remove the mirror, you need to find the bolts that hold it in place. As a rule, they are located under a decorative lining and are located so that they are not visible. The decorative hiding element must be removed. Often the rubber gasket is removed together with it. It is important not to lose it due to the fact that these items are not sold separately in stores, with some exceptions. When the cover plate is removed, the bolts are clearly visible. They need to be unscrewed; in addition, to avoid confusion during assembly, it is best to photograph the location of the multi-colored wires.

How to disassemble the rear view mirror of a VAZ 2110

How to disassemble a car mirror

There are many reasons to analyze a car's side mirror. This may be the desire to paint it or tidy it up after the woodcutter picked it up. Many car drivers are interested in how to disassemble a car mirror and how to remove it quickly and easily. Due to inept movements, a car mirror can become completely unusable, and then a new one will be needed, and as a result the mirror will be installed in a car service.

But there are many brands and even more models of cars and mirrors for them. There are also many types of mirrors. electrical, folding, rotating elements, etc. The most important thing is how to remove it to avoid damage. Below are general steps to analyze your camera's side mirror.

Removing the mirror

Naturally, it will be more convenient to disassemble a mirror removed from the car, so it should be removed. What will it take?

Removing a power mirror. First, remove the mirror lock, remove the three screws that secure the mirror to the door frame, and then remove the mirror.

Removing the electric mirror. First thing to do. disconnect the negative terminal from the battery. Next, unplug the power cord, remove the three screws that secure the mirror to the door, and remove them.

Removing mirrors

There are several ways to make a car mirror.

Disassembling the entire mirror element of a VAZ 2110

replacing side mirrors on a VAZ 2110

, 2111.2112 and the like.

Replacing side mirrors on a VAZ 2110

Video review of replacing the mirror element with an external mirror, rear view

such cars

First way

Using a curved object or screwdriver, carefully rotate the mirror while pushing it from the inside. Trying to pull the mirror away from the edge may damage it. Some motorists use many objects to remove the mirror element. It could even be all kinds of kitchen spatulas. Some wrap the edge of the spatula with electrical tape to avoid damaging the surface of the mirror. Others use a single solid blade. correct the gap, and insert the other one more softly into the resulting groove.

Second way

To remove the mirror element, you need to hit the body with a soft object. it could be anything. To detach the mirror housing from the triangular mount, remove the spring, unscrew the adjusting rod and remove the pin. Assembly and installation of the mirror is usually done in the reverse order.

Detailed and universal method

In the car, press down on the plastic cover that covers the screws that secure the mirror. With the cover removed, remove the three screws holding the mirror in place and remove it. Then carefully remove the rubber pads.

If the rubber gaskets are damaged, it will be very difficult to buy new ones; they are rarely sold separately.

Now unscrew the two screws that secure the mirror adjustment joystick. Analysis of the joysticks themselves. The procedure is simple, you just need to carefully remember the position and color of the cable, as different colors are responsible for setting them. Then remove the three screws that are located in the bottom plastic corner. it is most susceptible to damage during vehicle operation. Then it should be removed. How to remove the mirror element has already been described above. After removing the mirror element, remove the four screws and remove the rest.

Apply silicone glue

The easiest way, of course. Ask a friend or take your car to a body shop if you need a mirror replaced or a paint job. But most owners are used to having their car repaired. This is a significant money saving.

Disassemble the side mirror on a VAZ 2110 cm. Next video:

Mirror for VAZ 2110

Mirrors on the VAZ 2110 play an important role when driving on highways and during parking. The safety of the driver and passengers depends on the integrity and quality of this element. Therefore, if the mirror is broken, cracked or severely scratched, which interferes with visibility while driving, it should be replaced as soon as possible. Replacing the mirror on a VAZ 2110 may also be necessary for car owners who are dissatisfied with the visibility of standard mirrors. If a flat mirror is installed on a car, the driver may encounter a so-called dead zone, when a car moving behind disappears from view, which is especially dangerous when making maneuvers.

To increase the viewing radius, many owners replace standard mirrors with aspherical elements. Similar side mirrors on the VAZ 2110 consist of two parts, the larger of which is almost flat, and the smaller is shaped like a sphere with a variable radius, decreasing towards the edge of the mirror. This design provides better visibility. The presence of an aspherical element allows you to increase the viewing angle by forty percent, eliminating the possibility of a dead zone. It is not difficult to buy and install such mirrors on a VAZ 2110, however, it is worth remembering that in an aspherical mirror the distance to objects is distorted, which confuses inexperienced drivers.

Where to buy a mirror for a VAZ 2110?

Owners are often faced with the question of where to buy mirrors for a VAZ 2110. Finding spare parts for this car is not difficult: just contact specialized auto stores that officially sell spare parts manufactured by AvtoVAZ. If you couldn’t find a mirror of the right model, you can try to find a car dismantling shop where the VAZ 2110 is sold for spare parts. There are many private advertisements on the Internet for the sale of original VAZ spare parts. If you want to replace the standard mirror on a given car, it’s easy to choose a suitable spare part from a foreign car. At the same time, you can buy a mirror with additional functions and connect them to your car.

Replacing the Mirror Element of a VAZ 2110

How to change the mirror element on the rear view mirror of a VAZ- 2110

Some sources for describing the replacement of mirror mirror element The rear view of the VAZ-2110 say that this procedure is quite complicated and that it can be damaged during replacement. The owner of dozens could prove the opposite, who independently decided to change the broken spare part

All this nonsense - everything changes in 3 minutes! I left for half an hour because I was not in a hurry, I waited until the garage warmed up and overcame the children's interest in dismantling cars))) So I completely removed the mirror... At the same time, there was a little noise stuck inside the mirror on the triangle - now the wind will not blow in the mirror area )))

Photo 1. On the left is an explosion element , on the right is a new one for 35 UAH in the nearest auto store

Photo 2. Unscrew the handle inside the mirror control lever...

Disassembling the entire mirror element of a VAZ 2110

In this video I will show you how to replace the mirror element

(glass) on
VAS
.

replacement VAZ Mirror Element

Self-test video: replacing the mirror element

on the exterior mirror
there is a rear view of such cars
Photo 3. Inside we see this picture...

Photo 4. They even took care of the plant - they stuck in a piece of Shumka!

Photo 5. Well, the procedure itself...

Photo 6. This is the same white regulator plate...

Photo 2 - (one bolt under the plug), then remove the plastic housing (theoretically it is mounted on three pistons, but after removing the lever it immediately fell off!) and unscrew the three straight bolts holding the mirror.

Photo 3 - the Shumka is glued, poured under the side window seal (the holes can be pierced a little with a screwdriver, the Shumka does not interfere with installation)

Photo 5 - They frightened us with complexity, but everything is painful: we press our finger completely on point 1, then we put our finger on point 3, slightly press it towards ourselves, the mirror element is easily clamped... Don't pull too hard - it is still attached to the mirror mirrors with a white plate - under arrow 2. And that's all... Everything was removed without damage and my hands were cut...

What kind of mirrors are installed on the VAZ 2106

As mentioned above, the standard exterior mirrors of the Six are not suitable for all car owners.

And there are several reasons for this:

small size. Since the area of the mirror elements in standard mirrors is very small, the review also leaves much to be desired. In addition to the limited visibility, standard mirrors have blind spots, which also do not contribute to safe driving;
lack of protective visors. Since the “six” is a rather old car, its exterior mirrors do not have “visors” that protect the surfaces of the mirror elements from rain and sticky snow. So in bad weather the driver is forced to periodically wipe the outside mirrors. It is clear that not everyone likes this;
The mirrors are not heated. Because of this, the driver is again forced to manually clean the mirrors from ice;
appearance. The standard mirrors on the “six” can hardly be called masterpieces of design art. It is not surprising that drivers want to get rid of them.

We list the mirrors that drivers install instead of standard ones.

F1 type mirrors

The name F1 was assigned to these mirrors for a reason. In appearance, they resemble the mirrors found on Formula 1 cars. The mirrors are distinguished by a massive rounded body and a long thin leg.

F1 mirrors have a long thin stem and a massive rounded body

You can purchase them at any store that sells spare parts for car tuning. The owner of the “six” should not have any problems with attaching these mirrors. They are attached to the car using a standard plastic triangle. They are held on by three self-tapping screws. To install the F1 mirrors, you only need a Phillips screwdriver. F1 mirrors have both pros and cons:

the undoubted advantage of F1 mirrors is their modern appearance;
mirrors of this type are adjusted from the cockpit using a special lever. This point becomes especially important for the driver in bad weather;
but the review of the F1 mirrors leaves much to be desired, since the area of the mirror element is small. As a result, the driver has to adjust the mirrors every now and then. This happens every time the driver moves the seat back slightly or changes the angle of the backrest.

Universal type mirrors

Currently, the spare parts market offers the widest range of universal rear-view mirrors for the VAZ 2106. They differ both in quality and in manufacturer. In addition, mounting methods can also differ significantly. When choosing a universal mirror, it makes sense for a novice driver to focus on a standard triangle mount. And only after that look at the appearance of the mirror and viewing angles. The fact is that to install universal mirrors with non-standard mounts, additional holes may be necessary. And drilling neat holes in the car body is not as simple a task as it might seem. There are two types of mounting universal mirrors:

fastening using a standard triangle;

Universal mirrors with standard “triangles” are the most reliable
fastening directly to the mirror frame using special hinges.

Attaching the universal mirror to the frame is not reliable

It should be noted that fastening “behind the frame” has never been reliable. Over time, any fastener can weaken. As soon as this happens to the bolts in the hinges, the mirror will jump out of the housing and will almost certainly break. And this is another argument in favor of choosing fasteners in the form of a triangle.

Video: universal electric mirrors on the VAZ 2106

Large mirrors from Niva

Some drivers prefer to take a radical approach to improving their mirror visibility. And they install vertical rear-view mirrors on their “six” (they are also called “burdocks”). Nowadays native “burdocks” for the “six” are not so easy to find on sale, although literally three years ago the shelves were littered with them. But drivers found a way out of the situation: they began installing large mirrors from the Niva (VAZ 2121) on the VAZ 2106. The visibility after installing such mirrors really improves. But, alas, it’s impossible to call such a solution beautiful: the Niva mirrors on the VAZ 2106 look too bulky.

Large mirrors from the Niva provide an excellent overview, but such a design cannot be called beautiful

Such “bugs” can be attached to the “six” using a standard triangle. Only in this case you will have to take two brackets from the VAZ 2106 and Niva mirrors and use them to make a new fastener for a large mirror.

To install the “burdocks” from the old Niva, you will have to connect two brackets

Here we should also mention the new mirrors. As you know, the Niva car was updated relatively recently. This also affected the rear view mirrors. And if the car enthusiast has a choice, then it is better to install mirrors from the new Niva on the “six”.

If it is possible to install mirrors from the new Niva, you should choose them

Despite their small size, they have a good overview. There won’t be any big problems with fastening either: it’s still the same standard triangle, in which you’ll have to drill one extra hole.

Replacing the mirror of Lada 2110 (VAZ 2110)

There are many reasons for disassembling a car side mirror. This may be a desire to paint it, or to put it in order after it was caught by some reckless driver. How to disassemble a car mirror, and before that, how to quickly and easily remove it, is of interest to many car enthusiasts. Due to inept movements, a car mirror can become completely unusable and then it will be necessary to purchase a new one, and as a result, the mirror will be installed in a car service center.

But there are many brands and, moreover, models of cars, as well as mirrors for them. There are also many types of mirrors - electrically driven, folding, with turning elements, and so on. The most important thing is how to remove it so as not to damage it. Below are general steps to disassemble a car side mirror.

Instructions for complete disassembly of the side mirror of a VAZ 2110

How to disassemble the side mirror on a gilly mk: Atlas Auto

Instructions for complete disassembly of the Nexia side mirror. Instructions for complete disassembly. Instructions for complete disassembly of the Nexia side mirror. This instruction is general because Everyone can see in it the disassembly of the mirror exactly to the extent that he needs: someone needs to remove only the mirror element to install heated mirrors, someone needs to fix an adjustment cable that has flown out. Therefore, if you only need to remove the mirror element, there is no need to disassemble the mirror down to the last screw. We snap off the plastic triangle in the interior that covers the mirror mounting screws. Then unscrew the fastening screws and remove the mirror from the car. Carefully remove the first rubber gasket, because It is quite problematic to purchase new ones; they are rarely sold separately for repairs. Similarly, remove the second rubber gasket. Unscrew the two screws.

Download instructions for completely disassembling the side mirror of a VAZ

Then at one end of the wire we cut an m3 thread approximately 15 mm long, looking at Fig. 5, we insert it into the body of the future mirror. The wire should pass through the washer and then through the entire spring. Screw both nuts onto the wire and place one end of the spring on the bracket Fig. 7. The free end of the wire protruding from the side of the triangle (Fig. 5) must be firmly secured to something “immovable”. Or, twist a loop and put it on your own foot’s boot to check your deadlifting strength! In general, we pull the body of the mystery mirror “towards ourselves” as hard as we can until the assistant finally inserts the fixing key into place Fig. 5. Note: Swapping with an assistant is possible. The need to remove the side rear view mirrors of a VAZ 2110 may arise for various reasons, for example, for painting, installing heating, or completely replacing them. Disassembly is therefore necessary to carry out repairs or any other modifications. How to remove the rear view mirrors of a VAZ 2110 detailed instructions. Pry up the rearview mirror control knob cap and unscrew the mounting screw with a Phillips screwdriver. Remove the triangular plug by prying it up with a flat-head screwdriver, carefully releasing the latches as you do so. Next, unscrew the three screws that secure the mirror to the base, using the same Phillips screwdriver. You can remove the mirror element from the body in several ways: Dismantling the mirror, pressing on the central part of the mirror from the inside, and snap it off.

Dismantling and disassembling the rear view mirror of the VAZ-2110

There are many reasons for disassembling a car side mirror. This may be a desire to paint it, or to put it in order after its channels were caught by some reckless driver. How to disassemble a car mirror, and before that, how to quickly and easily remove it, is of interest to many car enthusiasts. Due to inept movements, a car mirror can become completely unusable and then it will be necessary to purchase a new one, and as a result, the mirror will be installed in a car service center. But there are many brands and, moreover, models of cars, as well as mirrors for them. There are also many varieties of electric mirrors, folding, with turning elements, and so on. The most important thing is how to remove it so as not to damage it. VAZ 2110, 2. Instructions for. Side mirrors of VAZ 2110. Complete disassembly.

How to disassemble a car mirror - disassembling the side

Removing the side mirror. Disassembling the side mirror. Forums faq on actions for brands and models. Disassembly instructions. Reasons for analyzing the side. Look at the Chinese mirror on the VAZ 2110.

Tuning VAZ: Body

Up. Disassembling the mirror. VAZ 2110 may arise according to. VAZ 2110. Side mirrors.

Complete instructions. Mirrors VAZ 2110: disassembling mirrors. In the housing of the side mirrors of the VAZ 2110. The auto industry has an advantage in the domestic market. Dismantling mirrors. Mirrors VAZ 2110;. Hotpoint ariston oven fz612 1ixha instructions State registration of rights to real estate form Statement of inventory and assessment of fixed assets object form Instructions for fire safety in the painting area

Removing the mirror

Naturally, it will be more convenient to disassemble a mirror removed from the car, so it should be removed. What is needed for this?

Removing a power mirror. First, you need to remove the mirror adjuster locking bracket, unscrew the three screws that secure the mirror to the door frame, and then remove the mirror itself.

Removing the electric mirror. The first thing to do is disconnect the negative terminal from the battery. Next, you need to disconnect the block from the electric drive wires, unscrew the three screws securing the mirror to the door and remove it.

Disassembling the mirror

There are several ways to disassemble a car mirror.

First way

Using a curved object or a screwdriver, unclip the mirror by gently pressing it from the inside. Trying to pry the mirror off from the edge may damage it. Some car enthusiasts use a wide variety of objects to remove the mirror element. It could even be all kinds of kitchen spatulas. Some wrap the edge of the spatula with electrical tape so as not to damage, or rather, scratch the mirror surface. Others use one hard spatula to fix the gap, and a second softer one to thread it into the resulting gap.

Second way

In order to remove the mirror element, you should sharply hit the body with a soft object - it can be anything. In order to disconnect the mirror housing itself from the triangular mount, you need to remove the spring, unscrew the adjusting rod and remove the pin. Assembly and installation of the mirror is usually carried out in the reverse order.

Useful tips

You need to place a small piece of soft cloth under the spatula or screwdriver, this will help avoid damaging the outer part of the mirror.

When removing the mirror surface from the fastenings with a screwdriver, it must be wrapped with electrical tape. This reduces the risk of damage to other elements.

side rear view mirror

If the mirror was attached using glue as well, it is necessary to return this layer. It is important to use the correct, suitable adhesive. For these purposes, there are three types: chemically cured, light-cured, and epoxy compounds. The latter will work as it should only if it dries well. In other words, the part must be pressed in the desired state for ten hours. Light-curing adhesive mixtures must be exposed to ultraviolet light. It will require a lamp; sunlight is not enough. An adhesive mixture that has the ability to harden using chemical processes is ideal.

Under no circumstances should you use regular super glue and adhesive tape. These products do not have the necessary properties, and the mirror will definitely fall over time.

Detailed and universal method

Inside the car, you need to unclip the plastic cover that covers the mirror mounting screws. After removing the cover, unscrew the three screws that hold the mirror in place and remove it. After this, you need to carefully remove the rubber gaskets -

If the rubber gaskets are damaged, it will be very difficult to buy new ones; they are rarely sold separately.

Now you need to unscrew the two screws securing the mirror adjustment joystick. Disassembling the joysticks themselves is a simple procedure; you just need to carefully remember the position of the cables and the color, since different colors are responsible for their adjustment. Next, you need to remove the three screws that are located on the lower plastic corner - it is most susceptible to damage during vehicle operation. After that you need to remove it too. How to remove the mirror element has already been described above. After removing the mirror element, you need to unscrew the four screws and remove everything else.

Place on silicone glue

The easiest way, of course, is to ask a mechanic you know or send the car to a car service center if you need to replace the mirror or paint it. But most owners are accustomed to repairing their car themselves - after all, this is a significant saving of money.

How to disassemble the side mirror on a VAZ 2110, see the following video:

Removing mirrors

Disassembling side mirrors

You can remove the mirror element from the mirror body in various ways: 1. Unclip the mirror by pressing on its center from the inside, using a curved object or a screwdriver. If you pry the mirror element from the edge, you can break it.

2. You can also remove the mirror element by sharply hitting the mirror body on a soft surface.

To detach the mirror housing from the triangular mount, simply remove the spring, unscrew the adjusting rod and remove its pin.

Assembly and installation of the mirror is carried out in the reverse order.

In order to replace the internal rear view mirror on VAZ 2110-2112 cars, you only need a couple of minutes of time and two screwdrivers:

With cross blade
Flat

Video

How to disassemble the side mirror on a VAZ 2110, see the following video:

How to disassemble and repair a rear view mirror?
What will be needed for disassembly
How to remove a mirror
How to disassemble a mirror, 3.2 methods
Repair rules

It often happens that the rear view mirror mount weakens and the mirror does not hold well, or in other words, falls off (you know, someone caught it while driving). It happens that the side mirror is broken or cracked - it needs to be replaced. The mirror angle adjustment drive will require repair.

Of course, contact a car service center, and they will attach a mirror to the area. If there is no service nearby, you will have to act independently. A rear-view mirror is important on the road: the driver can see the situation on the road in the viewing area behind the rear fenders and rear bumper. Mirrors on different brands of cars are different: internal mirror and side mirrors, regular, folding, electrically driven and others. In the process of removing and disassembling any mirror, you must be very careful not to destroy the mirror itself.

To disassemble the mirror, you need the following tool:

3.2 flat screwdrivers (they are used to unlatch the latches).

A narrow, long screwdriver and a piece of soft fabric (to be able to wrap the screwdriver).

A 10mm star wrench or a standard screwdriver with interchangeable bits.

How to remove the electric side mirror (assembled):

1. Remove the triangular trim from the front door.

3.5. Disconnect the mirror wiring connector. Do not damage the heated mirror wiring!

3. Holding the mirror, remove the 3 mounting screws.

4. Remove the mirror assembly.

5. We produce mirrors in reverse order.

See:

Replacing the mirror of Lada 2110 (VAZ 2110)

Removing the mirror

Naturally, it will be more convenient to disassemble a mirror removed from the car, so it should be removed. What is needed for this?

Removing a power mirror. First, you need to remove the mirror adjuster locking bracket, unscrew the three screws that secure the mirror to the door frame, and then remove the mirror itself.

Disassembling the mirror

There are several ways to disassemble a car mirror.

First way

Second way

Interior mirrors VAZ 2106

The purpose of the interior mirror on the “six” is obvious: with its help, the driver can see those sections of the road that are not in the field of view of the exterior rear-view mirrors. First of all, this is the section of the road located directly behind the car. Interior mirrors on the VAZ 2106 may be different.

Standard salon mirror

The standard VAZ 2106 mirror is mounted on a leg, which is secured in the opening between the solar panels using two self-tapping screws. Like exterior mirrors, the standard interior mirror has a housing with a hole for a hinge. The body contains a mirror element.

Standard interior mirrors on “sixes” have never had a wide view

The hinge allows the driver to change the angle of the mirror, adjusting the viewing area. In addition, there is a switch in the mirror housing that allows you to set the mirror in “night” and “day” modes. Despite all these points, the standard mirror has a rather narrow view. Therefore, drivers at the first opportunity change this mirror to something more acceptable.

Panoramic interior mirror

Drivers often call panoramic interior mirrors “half lenses” because of their characteristic shape. One of the main conveniences associated with panoramic mirrors is their mounting method.

Panoramic interior mirrors are often called “half lenses” by drivers of “sixes” because of their characteristic shape.

The mirrors have small clamps with which the “half lens” can be attached directly to the standard mirror without removing it. Panoramic mirrors have both pros and cons:

the mirror has a slightly curved C-shape, which significantly expands viewing angles, allowing you to capture even part of the dead zones;
The panoramic mirrors are equipped with protective coatings that can be either anti-reflective, darkening, or, on the contrary, brightening (the latter option is especially convenient for drivers who prefer to tint the rear window).
but panoramic mirrors also have one significant drawback: they are not suitable for novice drivers. In a panoramic mirror, the distance to the nearest car behind always seems greater than it actually is. Experienced drivers remember this, but beginners often forget.

Mirror with built-in video recorder

Mirrors with video recorders began to be installed on the “Six” about five years ago. Many car enthusiasts consider this option preferable to purchasing a full-fledged recorder.

Mirrors with recorders allow you to do without installing additional devices on the windshield

There is a certain logic in this: since when using such a mirror there is no need to install additional devices on the windshield, the driver’s view is not limited. The image transmitted by the built-in recorder is displayed directly on the surface of the rear view mirror, usually on the left side.

Mirror with built-in display

Mirrors with built-in displays have appeared relatively recently. They are installed on the “sixes” by the most advanced car enthusiasts.

Interior mirrors with displays make parking much easier

This mirror is usually sold complete with a rear view camera installed near the car's bumper. The built-in display allows the driver to see everything within the rear camera's field of view. This makes maneuvering and parking much easier.

So, the mirrors on the VAZ 2106 can be very different. If the car owner doesn’t like the standard ones for some reason, there is always the opportunity to install something more modern both outside and inside the car. Fortunately, there are no particular problems with attaching mirrors, and the range presented on the shelves of spare parts stores is very wide.

Detailed and universal method

If the rubber gaskets are damaged, it will be very difficult to buy new ones; they are rarely sold separately.

Place on silicone glue

How to disassemble the side mirror on a VAZ 2110, see the following video:

Removing mirrors

Description of standard mirrors VAZ 2106

The design of both the interior mirror and the two exterior mirrors on the “six” has no fundamental differences. The mirrors are based on a rectangular mirror element mounted in a soft plastic frame, which, in turn, is inserted into the rectangular mirror body.

The design of standard external mirrors on the “six” is extremely simple

All housings have a small hinge hole that secures the mirrors to their support legs. The hinge allows the driver to change the angles of the mirrors, adjusting them to suit himself and achieving the best view.

Number of mirrors and need for right mirror

The standard “six” has three rear-view mirrors. One mirror is located in the cabin, another pair is located outside, on the car body. Many novice car enthusiasts have a question: is a right rear view mirror really necessary? Answer: yes, it is necessary.

The right rear view mirror allows you to more accurately determine the right size of the car

The fact is that the driver, looking in the rearview mirrors, not only assesses the situation behind the car. Mirrors help you better feel the dimensions of the car. A novice driver, who gets behind the wheel of a “six” for the first time, feels the left side of the car very poorly, and does not feel the right side at all. Meanwhile, the driver should have a good sense of the dimensions. This is necessary not only when changing lanes from one lane to another, but also when parking a car. The only way to develop your “sense of size” is to look in the rearview mirrors more often. Therefore, all three mirrors on the VAZ 2106 are indispensable assistants for both beginners and experienced drivers.